|
| 1 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 2 | Dismantiling chain link fencing wire mesh of any typecomplete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dence soilcomplete all as specified and as directed. |
| 4 | Removing excavated soilexc. 50m and depositing where directed at a level not exc. 1.5 mcomplete all as specified and as directed. |
| 5 | M & L for Hardcore of broken stones or boulders of guage not exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfacecomplete all as specified and as directed. |
| 6 | M & L for cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concretecomplete all as specified and as directed. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcomplete all as specified and as directed. |
| 8 | M & L forcement concrete Type B0 1:2:4 (20 mmgraded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating including necessary for in work where applicable as directed |
| 9 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed |
| 10 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smoothcomplete all as specified and as directed. |
| 11 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge. |
| 12 | S&F Cast iron grills/gratings of size and shape as approved by GE including welding to steel frames, posts etccomplete all as specified and as directed. |
| 13 | S&F steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workcomplete all as specified and as directed. |
| 14 | M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge |
| 15 | M&L fortwo coats of ducco paint ,colour as specified over a coat of red oxide primer on new steel surfaces including preparation of surfaces complete all as specified and as directed. |
| 16 | M&L for wall cladding tiles 600 mm x 300 mm and 7 to 8 mm thick as in wall cladding, set and jointed in grey cement paste and pointed in coloured cement or with mixture of white cement and pigment to match colour of tiles includung dismantling of existing complete all as specified and as directed. |
| 17 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed. |
| 18 | M & L for rendering 10mm thickin CM (1:6) on brick masonry internal surfaces of wallsfinished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M & L for 75 mm thick cement concrete (1:4:8) type D2 (using 40mm grade broken stone aggregate) as in sub basecomplete all as specified and as directed. |
| 20 | M & L for Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and as directed. |
| 21 | M&L for 60mm thick glossy finish factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 22 | Providing and laying a factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and as directed. |
| 23 | M & L for preparation of new concrete surfaces/kerb stone of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 24 | S & F Framed work in side hung gates( including pintel hinges, stops, hand made sliding bolts)/ grillswith ornamental and intricate design, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe. 290.Gde-E-165 |
| 25 | M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed ofCM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed. |
| 26 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed. |
| 27 | Material and labour in repair for 200mm bore RCC pipes, class NP-2 for laid and jointedwith collars and tested including demolition and breaking up 200mm bore dia drain pipes(salt glazed earthern ware,AC or reinforced concrete), set in cement mortar complete all as specified and as directed. |
| 28 | Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes includingpacking under and haunching against the sides of pipes after they are laid and testedfor 200mm bore of pipe including demolition of existing PCC complete all as specified and as directed. |
| 29 | Supply and fix Precast factory made RCC manhole cover include frame, 50mm thick light duty factory made with IS code-12592:2002 specification and fixed properly over manhole on new/old and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed. |
| 30 | Surface dressing n exc 15 cm deep in soft/loose soilcomplete all as specified and as directed. |
| 31 | M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screedbed of 20mm thick in CM (1:6)complete all as specified and as directed. Note:- Design/pattern of tiles as approved by Engr-in-charge |
| 32 | M&L for preparation of new plastered surfaces Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed by Engineer-in-charge. |
| 33 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
