|
| 1 | SCHEDULE \"A\" PART-I: B/R WORKS |
| 2 | Complete removal of existing roof treatment including roughening the surfaces of old concrete surfaces by picking, sweeping, cleaning, washing down with water to remove dust, etc including Material & Labour for brushing cleaned roof surfaces with neat cement slurry @3kg/Sqm complete all as specified and directed. |
| 3 | Rendering 15 mm thick on concrete surfaces in cement mortar 1:4mixed with including water proofing compound @ 3% by weight of cement and finished even and smooth complete all as specified and directed. |
| 4 | Applying polymeric water proofing membrane APP based of weight not less than 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm) including coating the surface with water based bituminous primer @ 0.5 lit / Sqm and hot blown bitumen @ 1.20 Kg/Sqm at the bottom and another coat at top of the membrane and finally finished with one coat of bitumineous aluminium primer at 100 grams/Sqm for any heigh complete all as specified and directed. |
| 5 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets complete all as specified and directed upto 11th floor. |
| 6 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions. |
| 7 | S &F of Anodised aluminium snap gridframe work of size 605 X605 mm for false ceiling all as specified. |
| 8 | Hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long complete all as specified. |
| 9 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frameupto 11th floor |
| 10 | Taking down chowkats or framesexc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frameupto 11th floor |
| 11 | Taking down shutters exc 1.00 but n.exc 2.00 Sqm each. |
| 12 | S&F Factory made UPVC coloured Sliding Window of area not exceeding 2.0 Sq.m, Three Track made of extruded profiles with wall thickness of 2.3mm [± 0.2mm], Window profile with hollow section with multi chamber, frame [112mm X 52mm], sliding sash [42mm X 67mm], Sliding mesh sash [42mm X 57mm], sliding interlock (One vertical length in each shutters)[45.50mm X 28mm], Glazing bead [24.50mm X 16mm] will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water, etc. , making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame [30mmx 18mm] 2 Nos, sliding sash [30mm x 18mm], sliding mesh sash [26mm x 10mm] profile to be inserted in required profile, frame will be fixed to the wall with 8mm X 100mm long fasteners.Hardware [Touch lock of zinc alloyed (white powder coated), Steel roller system, stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. To be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof,complete all as specified and as per SSR. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening willbe measured for payment purpose. |
| 13 | S&F Factory made UPVC coloured fixed or casement window / ventilator of area not exceeding 1.0 Sq.m, made of extruded profiles with wall thickness of 2.3mm [ ± 0.2mm], Window profile with hollow section with multi chamber, frame [60mm X 58mm], T profile (One vertical length in between two shutters) [60mmx 74mm], Glazing bead [35mm X 20mm] will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water of etc., making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame [28mmx 21.5mm], T profile [27mm x 17mm] to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fasteners. 5mm thick glazing with selected quality glass,complete all as specified and as per SSR. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening willbe measured for payment purpose. |
| 14 | S&Fsolid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 11th floor |
| 15 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,suppling & fixing in the frame at site as per specification & drawing upto 11th floor. |
| 16 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, upto 11th floor all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 17 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwsupto 11th floor all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 18 | S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charg upto 11th floor. |
| 19 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 20 | S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutterwith lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel. |
| 21 | S & F 30mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a) |
| 22 | S&F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels & both faces covered with decorative face 2 to 3 mm thick veneering with lipping/ frame to match all as specified and directed. |
| 23 | M & Lfor 12 mm thick prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination both sides for kitchen cuboards complete as directed by Engr-in-charge |
| 24 | Hacking out old broken glass (any thickness size quality or description) from wooden , steelor aluminium frames glazed with putty or fixed with wooden beads complete all as directedupto 11th floor |
| 25 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 11th floor |
| 26 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares exc 0.5 sqm in each pane upto 11th floor |
| 27 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 11th floor |
| 28 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 11th floor |
| 29 | S&F in repairs wire cloth of Aluminium alloy wire 0.45 mm nominal dia of wire and average width of aperture 1.40 mmfixed with wooden/almn beads /screws to window/door complete. |
| 30 | S&F mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling hole etc. complete all as specified and as directed. |
| 31 | Cement concrete 1:2:4, type B1 (Using 20 mm gradedstone aggregate) in hold fast. |
| 32 | S&F 100 mm cast brass with mild steel hinges fixed with stainless steel screws. |
| 33 | S&F in repairs 100 mm cast brass with mild steel hinges fixed with stainless steel screws. |
| 34 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 35 | S&F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 36 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 37 | S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 38 | S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 39 | S&F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 40 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 41 | S&F in repairs 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 42 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, fixed in floor . |
| 43 | S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, fixed in floor . |
| 44 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 45 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 46 | S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 47 | S&F in repairs200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 48 | S&F in repairs 300 mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 49 | S&F in repairs Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg. |
| 50 | S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm diawith suitable SS brackets matching to curtain rod of make as as approved by GE upto 11th storey complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ] |
| 51 | S& F in repairs rubber beading 50 mmwide and5 mm thick upto 11th floor. |
| 52 | S&F in repairs Corner Glass Shelf, Fancy Type complete all as per Jaquar Catalogue No. ACN-1173N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine up to 11th Floor complete all as specified and as directed. |
| 53 | S & F in repairs Glass Shelf, Fancy Type complete all as per Jaquar Catalogue No. ACN-1171N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shinecomplete all as specified and as directed. |
| 54 | S & F in repairs PVC body cabinet box mirror of size 350 mm x 450 mm x 100 mm in PTMT alloy of approved patterns and designs fixed in repairsafter taking out the old cabinet complete all as specified and as directed. Make : PRAYAG Cat No. 551 or equivalent as approved by the GE |
| 55 | Supply only 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers upto 11th floor complete all as specified and directed. |
| 56 | Taking down Aluminium door shutter repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc ,replacement of fittings and refixing on the same opening not exc 4sqm each |
| 57 | M & L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc., in apron |
| 58 | M&Lfor ATT at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at down word angle of 45 degree at 150mm centre to centre and sealing the same. |
| 59 | S&F in repairs Stainless steel kitchen plate rack of size 900mm x 750mm x 250mm, made of 1mm thick stainless steel sheet complete all as directed.[Make: Prayag/ Nirali/ Jayna/ Neelkant] |
| 60 | M&L Dismantling boarding of any description, fixed in any position with nails. |
| 61 | S&F 18 / 19 mm thick marine plywoodfixed with screws to timber frame including external teak wood lipping, 6mm thick, fixed with nails all as specified and as directed. |
| 62 | S&F 12 mm thick plywood grade BWP, type BB fixed with screws to timber frame all as specified and as directed. Upto 3rd floor |
| 63 | S&F 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions all as specified and as directed.upto 8th floor to 11th floor |
| 64 | M&L for Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white laminationfixed with screws to timber frame workandparticle board fitted with external teak wood lipping, 6mm thick fixed with nails up to 3rd Floor complete all as specified and as directed. |
| 65 | S&F 100 mm wide stainless steel hasp and staple for all cupboards all as specified and as directed. |
| 66 | S & F Magnet Catches with 8 mm dia steel ball and Brass Body and Striking Plate including letting in and fixed in repairs complete all as specified and as directed. |
| 67 | S & F 50mm dia, polished, hardwood knobs fixed with screws and in repairs complete all as specified and as directed up to 3rdfloor. |
| 68 | S & F Brass Mortise Locks, 6 Levers of size 100mm of Make Godrej or equivalentincluding escutcheon plates and duplicate keys in repairs up to 11th floor complete all as specified and as directed. |
| 69 | S & F 25 mm wide channel with rollers for sliding of drawers in repairs, complete all as specified and as directed. |
| 70 | S & F Double track aluminium Bombay channel of size 15 mm x 25 mm wide and 1 mm fixed in repairs, complete all as specified and as directed. |
| 71 | S&F Magnet Catches with Striking Plate, 40mm size superior quality and Brass Body andincluding letting complete all as specified and as directed. |
| 72 | S&F full overlay slow motion 3D hinge (3D hydraulic clip) complete all as specified and as directed. |
| 73 | S&F brass handles extruded fabricated type100mm size upto 11th floor complete all as specified and as directed. |
| 74 | S&F brass cup board lock 75mm size 4 level with duplicate keys upto 11th floor complete all as specified and as directed. |
| 75 | S & F in repairs 15 mm bore dia.,fancy type bib tap of PTMT any colour of minimum weight 105 grams, screwed for iron pipe and fixed upto 11th floor complete all as specified and directed. |
| 76 | S&F in repairbib taps 15mm bore (for iron pipe) cast copper alloy fancy type chormium plated butter fly handle screwed down including fixed in repair all as specified. |
| 77 | S & F in repairs Bib Taps Long Body, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete as per Jaquar Catalogue No. CON-107KN or its equivalent all as specified and as directed. |
| 78 | S & F in repairs 15 mm bore pillar taps, Cast Copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. |
| 79 | S & F in repairs Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. CON-041KN or its equivalent complete all as specified and as directed. |
| 80 | S & F in repairs chromium plated 15 mm bore Angle/ plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting as specified and as directed. |
| 81 | S & F in repairs Health Faucet with 1 m Stainless steel flexible tube, wall hook, non return valve complete all as per Jaquar Catalogue No. ALD-563 or its equivalent complete all as specified and as directed. |
| 82 | S&F in repairs shower roses size 125 mm round or square withbrass chromium plated arms. Make:- Marc/Jaguar o Equivalent |
| 83 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets . |
| 84 | S&F in repair 45 cms long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing oneMake- Prayag/symat |
| 85 | S&F in repair60 cms long PTMT connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing oneMake- Prayag/symat |
| 86 | S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink upto 11th floor. |
| 87 | S&FPTMT Urinal waste pipe of standard pattern, 80 cm long, 50 mm dia . Make : Prayag |
| 88 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) Nahani/Floor traps complete all as specified |
| 89 | S&F in repairs plastic WC seat cover of any colour pedestal pan , closed pattern with flat bottom & cover including MS chromium plated ,aluminium hinging devices complete. Make CERA /Commender/or approved by engineer - in charge |
| 90 | S&Fin repairs Ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 11th floor |
| 91 | S&Fin repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 11th floor |
| 92 | S&Fin repairs Ball valves 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 11th floor |
| 93 | S&Fin repairs Ball valves 50 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 11th floor |
| 94 | S&F in repairs PVC tank cover for 500/1000 Ltrs. complete includinglocking arrangement or thread type all as specified & directed. |
| 95 | S& F in repairsrotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including dismantling existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover. Make:- Sintex/Polycon/Sheetal |
| 96 | S& F in repairsrotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including dismantling existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.Make:- Sintex/Polycon/Sheetal |
| 97 | S& F in repairsrotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (2000 ltr capacity) including dismantling existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.Make:- Sintex/Polycon/Sheetal |
| 98 | S & F in repairs Single / Double Lever Basin Mixer cast copper alloy, chromium plated with central hole for WHB, Fancy type 15mm bore with 450mm long braided hose & base flange complete as per Jaquar Catalogue No. CON-167KNB or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified and as directed. |
| 99 | S & F in repairs Single / Double Lever cast copper alloy, chromium plated Hot and Cold 15mm dia Wall Mixer with provision for both Hand Shower and Overhead Shower complete with 115mm long bend pipe, connecting legs & wall flange complete [excluding hand & overhead shower] as per Jaquar Catalogue No.CON-281KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine Floor complete all as specified and as directed. |
| 100 | S&F in repairs vitreous China squatting pan \"orrisa\" pattern white colour of size 580x440mm with integral foot rests confirming to IS 2556 part II including provision of lime concrete including P traps. Make:- Hindware/Cera/Parryware. |
| 101 | S&F in repair wash down water closet (pedestal pattern) of any colour including P or S trap and fixing of bolts complete. Make:- Hindware/Cera/Parryware |
| 102 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550x400 mm size including cutting for and pinning in ends of brackets and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin and brackets and fixing new brackets complete upto 11th storey. |
| 103 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cementmortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size410 mm x 330 mm x 160 mmupto 11th floor complete all as specified and directed. |
| 104 | S&F in repairs vitreous china coloured half stall urinalincluding brass chromium plated brackets , fittingand waste coupling,urinal spreder , PVC connection etc complete all as specified and directed by Engr-in-charge |
| 105 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 106 | S&F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 107 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 108 | S&F 75 mm bore PVC (SWR) bends of any radius |
| 109 | S&F 110 mm bore PVC (SWR) bends of any radius |
| 110 | S&F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door. |
| 111 | S&F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door. |
| 112 | M & L in repairsfor PVC (SWR) plain Floor/ Nahani trap of 75/110 mm dia., outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 113 | S & F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 114 | S & F in repairs Brass chromium plated towel Ring , fency type complete all as specified and directed. |
| 115 | S & F in repairs Soap dish, stainless steel of approximate size 160mmx 160mm x 90 mm embedded in the wall complete all as specified and as directed. |
| 116 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10cm girth in stone, concrete block or slab, wall complete all as specified and as directed. |
| 117 | Supplying and laying of 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down of old steel tubing and connections complete all as specified and directed. |
| 118 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down of old steel tubing and connections complete all as specified and directed. |
| 119 | S & F 3-layer PP-R [Polypropylene random copolymer] concealed pipes of 25 mm outer dia of pipe, SDR 7.4 [PN-16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded poly propylene random fittings fixed complete to walls, ceilings or in floors etc. including testingand taking up or down of old steel tubing and connections complete all as specified and directed. |
| 120 | Removal of air lock/blockage of water in any material Tubing bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as directed. |
| 121 | S & F in repairs gun metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 122 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., all as directed by the Engineer in Charge. |
| 123 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). |
| 124 | M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6). |
| 125 | Taking down of cement plaster of any description on brick or stone walls,ceiling,chajja,roofprojection etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 126 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 127 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) andfinished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately). |
| 128 | Supply only liquid water proofing compound of approved quality. |
| 129 | M&L fo Rendering 5 mm thick on fair faces ofconcrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etcandfinished even and smooth without using extra cement. |
| 130 | M&L For supply and application of pre-batched one component Polymer modifiedprotective Mortar(PMPM) of thickness 12-15mm of Sika Top -122 manufactured by M/s Sika India Pvt Ltd or its equivalent in M/sFosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd for repair of spalling and damaged concrete in RCC Structure and superstructure works including bond coat manufactured by M/s Sika India Pvt Ltd or its equivalent in M/sFosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd or M/s Asian for bonding old and new concrete surfaces, includingdouble scaffolding and safety measures as required and specified necessary tools and machinary, curing, consumables etc. upto 11th floor buildings complete all as per manufacturers instructionsincluding taking down old plaster as specified and as directed. |
| 131 | M & L for preparation of newly plastered surface and applying two coat of oildistemper emulsion over a coat of alkali resistant primer complete. |
| 132 | M & L for preparation of new external plastered wall surfacesand applying two coats of exterior emulsion weather proof paint [ APEX Ultima or equivalent ] over a coat of primer over the surfaces complete all as specified and directed. |
| 133 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash. |
| 134 | M&L applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surfaces over 10cm width/girth incl preparation of surfaces. |
| 135 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel paint for any height upto 11th floor complete all as specified and directed. |
| 136 | Complete removal of existing treatmentand applying two coats of exterior emulsion weather proof coat paint[ APEX Ultima or equivalent ] over a coat of primer on external wallsurfaces [ upto 11th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 137 | Complete removal of existing treatment and applying one coat of oil bound distemper over a coat of primer on a layer of cement/Birla putty on old plastered wall surfaces incl preparation of surfaces all as specified and directed. |
| 138 | Complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on a layer of cement/Birla putty on old plastered wall surfaces incl preparation of surfaces all as specified and directed. |
| 139 | M&L Preparing old surfaces of external wall /ceiling bybroomingdown orby steel wire brushingandapplying one coat of exterior weather proof emulsion by auto roller all as specified and directed. |
| 140 | M&L Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash by auto roller all as specified and directed . |
| 141 | M&L Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash by auto roller all as specified and directed. |
| 142 | M&L Preparing old surfaces wall and applying one coat of distempered oil emulsion by auto roller all as specified and directed . |
| 143 | M&L Preparing old surfaces wall and applying two coat of distempered oil emulsionby auto roller all as specified and directed. |
| 144 | M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). |
| 145 | M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 146 | Preparing old surfaces of walls and applying one coat of cement based paint by auto roller all as specified and directed. |
| 147 | M&L for n exc 3mm thick wall care putty on walls complete all as specified and directed by Engineer-in-charge |
| 148 | M&L preparation of old treated wall surface and applying one coat ofAcrylic emulsion upto 11th storey complete all as specified and as directed. |
| 149 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for in sunken floor. |
| 150 | Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) in sunken floors, fillling and mass concrete upto 11th storey complate all as specified and directed. |
| 151 | Rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 mixed with WPC andfinishing the surface even and smooth without using extra cement upto 11th storey complate all as specified and directed.(NOTE: Supply only WPC shall be measured and paid separately) |
| 152 | M&L for applying two coats of Sika top Seal 107 or equivalent in FOSROC on plastered surfaces as per manufacturer instructions etc upto 11th floor complete all as specified. |
| 153 | Demolition concrete (unreinforced) in ground floor and pavings not exc 15cm thickness (below or above ground floor). |
| 154 | M&L cement concrete type C1 ,1:3:6 ( using 20 mm graded stone aggregate) 75mm thick as inplinth protection,path, Hardstandingetc finished the surface even and fair w/o using extra cement complete all as specified and directed. |
| 155 | M & L for 100 mm thick Cement concrete type D -2, 1:4:8 (40mm graded aggregate) as in Sub base / hard standing. |
| 156 | M & L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as levelling coarse below tile flooring all as specified and directed |
| 157 | Dismentling of floor hearth or wall tiling ofany description including cement mortar bedding (but not backing),removing serviceable tiles to store & rubbish off the premises |
| 158 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 159 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles. |
| 160 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 161 | M & L for Coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) |
| 162 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or Light coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 163 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles. |
| 164 | M & L Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick screed bed (1:4). |
| 165 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed. |
| 166 | S & F in repairs 15 mm bore dia.,fancy type bib tap of PTMT any colour of minimum weight 105 grams, screwed for iron pipe and fixed complete all as specified and directed. |
| 167 | S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink upto 9th floor. |
