|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/L of stone Solling (Dully hand packed) incl. watering dressing and ramming with all carriages loadinf unloading and stacking (Complete Job) |
| 3 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 4 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for: Lintel beams and cantilevers |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended Floor |
| 8 | Reinforced cement conc. Work up to plinth level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 9 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 11 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) |
| 12 | Structural steel welded in built up sections incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer with painting all complete 40x40x5 mm |
| 13 | Dry Random rubble massonry in nallah with hard stone in foundation and plinth without bond stone |
| 14 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 15 | P/F first quality ceramic glazed wall tiles of app make in all colour shades excpt begundy, bottle green black of any size in skirting risers of steps dados over 12mm bed of cement mortar 1:3 complete |
| 16 | 12 mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) |
| 17 | 6 mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) |
| 18 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 20 | Providing and fixing PVC conduits of approved brand and quality or as directed by EIC. 25mm dia. |
| 21 | Providing and fixing Light Junction boxes (concealed type) of approved brand and quality or as directed by EIC. |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. |
| 24 | Providing and fixing of CP/PVC tube connecting pipe with sink/basin/flushing cistern and all other fitting accessories all complete job as per the directions of site incharge. |
| 25 | Providing and fixing PPR pipe lines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/sockets etc wherever required of nominal sizes: a). 20 mm dia. nominal bore |
| 26 | b). 25 mm dia. nominal bore |
| 27 | 110mm dia. PVC SWR socketed pipe with rubber ring joints as per IS: 13592 Type-B. |
| 28 | 75mm dia. PVC SWR socketed pipe with rubber ring joints as per IS: 13592 Type-B. |
| 29 | Providing and fixing in position PVC \"P\" or \"S\" traps. |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 25mm nominal bore, 152mm long, weighing not less than 440gms. |
| 32 | Carriage of materials By Mech.Transport, from source to site of work for 25 km avg lead |
| 33 | Carriage of Bricks By Mech.Transport, from source to site of work for 50 km avg lead Please Enable Macros to View BoQ information |
