|
| 1 | Earthwork excavation in sandy soil and other types of soil upto 1.50m if encountered purpose of foundation, ground leveling & shaping to required sizeslopes , backfilling etc.compacting of earth by ramming/watering or other means. Removing ofsurplus earth with a lead up to 50.00metres andas per drawings, specifications and as directed by the Engineer-in-Charge. |
| 2 | Dismantling of RCC works/brick work including scaffolding, stacking of serviceable material and disposal of unserviceable material within 200 mtr. lead as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 3 | Conveying thesurplus excavatedearth/debris , boulders and spoil by mechanical means and depositingat identifiedplacesas dumping yard as per requirement with a lead for 1st 1 kilometer or part thereofincluding loading ,unloading, breaking clods , levelling all complete as per specification and as directed by the Engineer - in- Charge. 1) The rates in respect of this Item are applicable for the NET quantities arrived at after making deductions for the voids @20 % in respect of soil and @50% in respect of Rock from the correspondingStack/ truck measurements.2) The earth shall be dumped well inside the dumping yard and not over approach pathway road complete all as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 4 | Providing and laying Cement Concrete 1:3:6 using 20mm and downgraded size hard granite broken stone in foundations, trenches etc. including necessary form work, ramming, compaction, leveling, mechanical mixing, curing, dewatering, if any, complete as per drawing , specification and direction of Engineer in charge. |
| 5 | Providing and Casting in situ Reinforced Cement Concrete M30 grade at all heightsusing machine crushed hard broken granite stone of maximum size 20mm, curing , mechanical mixing, transporting,placing of lifts vibrating, consolidation etc., as directed by Engineer in Charge. Note: minimum cement content is 400kg/Cum. |
| 6 | Manufacturing, supplying, hoisting and fixied in position at all lifts, Precast units of various patterns an size forprecast plain solid units, 50mm/75mm/100mm thick slabs, karb stone, exhaust fan moulds etc., in reinforced cement concrete of 1:1.5:3, using 20mm and below machine crushed graded stone aggregate including weight batching, mechanical mixing, casting, vibrating,finishing of exposed faces, curing, necessary formwork & moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excludingsteel reinforcement complete all as per drawing, specification and as directed by engineer-in-charge. |
| 7 | Providing ,Cutting ,bending placing ,binding steel reinforcement in all reinforced concrete works Fe 500D make TATA , VIZAG, TMT bars including cost of spacer blocks, CM1:2 and binding wire complete as per drawing and specifications complete all as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 8 | Providing, Supplying, cutting, bending to shape, welding, fabricatiog, hoisting, placing and fixing in position Structural steel members like trusses, purlins etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, applying a coats of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging requird for fabrication as well as erection etc., the rate inculdes removing / cutting/ dismendling existing gate and shifting to PRP scrap yard etc., complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note : Lifting device,cutting, welding arrangements if any requird also arraged by the contractor at his own cost. |
| 9 | Supplying, placing in position and removing Formwork for all insitu concrete works including sloped roof and arches etc., as per drawings and specifications, all centering, scaffolding complete and as directed by Engineer -In-Charge. (Measurement for the formwork shall be the area of forms in contact with concrete surfaces). |
| 10 | Providing and constructing Random rubble masonry in cement mortar 1:6using hard granite stones obtained from approved quarrywith bond stones at 2.00 meters apart for foundation, basementand in superstructures, compound/boundary walls, including size of stones at all levelsinclusive of tools, scaffolding ,raking out joints, pointing, curing etc. as per specification anddirection of Engineer -in- charge. |
| 11 | Providing and laying 230mm brick work with well burnt stock bricks in cement mortar 1:5 at all levels(uptofifteen floor)inclusive of tools, scaffolding ,raking out joints, curing etc. as per specification anddirection of Engineer -in- charge. |
| 12 | Providing and constructing 110mm thick (plus or minus 5mm) brick work in Cement Mortar 1:4 for partition walls at all levels using well burnt stock bricks/fly ash bricks including supplying and providing 2 nos. of 8mm MS rod at every fourth layer, scaffolding, curing complete all as per specifications anddirected by Engineer -in- charge. Note: The contractor shall make his own arrangements for supply of 8 mm MS rods of required quantity for the works. |
| 13 | Plastering with cement mortar 1:4, 12mm thick for brickwork for internal and external faces ,finished smoothincluding mixing MasterEmaco SBR 2 ofBASF / Nitobond SBR / approved equivalent at the rate of 7 Lt. / Bag of cement ,scaffolding , curing etc complete all as per drawings, specifications and as directed by the Engineer-in-Charge.Note: MasterEmaco SBR 2 ofBASF / Nitobond SBRshall be supplied by department. |
| 14 | Plastering with cement mortar 1:3, 6mm thick for brickwork for internal and external faces ,finished smoothincluding mixing MasterEmaco SBR 2 ofBASF / Nitobond SBR / approved equivalent at the rate of 7 Lt. / Bag of cement ,scaffolding , curing etc complete all as per drawings, specifications and as directed by the Engineer-in-Charge.Note: MasterEmaco SBR 2 ofBASF / Nitobond SBRshall be supplied by department. |
| 15 | Repairs to plaster With cement mortar 1:4 (1 cement : 4 fine sand)of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. |
| 16 | Providinglaying 40mm thick concrete flooringwith 12mm thick metallic concrete hardener topping at all levelsand floors consisting ofunder layer 28mm thick cement concrete1:1:2 using crushedstone sand ( 1 cement: 1 fine aggregate: 2 stone aggregate of 12.5mm nominal size) by volume and top layer 12mm thick cement hardener consisting of mix 1:2(1 cement hardrener of Hardonate/Ironite or approved equivalent : 2 graded stone aggregate 6mm nominal size by volume)(metalic harderner and cement mixed ratio 1:4) prepared as p er manufacture \"s instructions inluding chipping the concrete surface, finishing , curing , Flooring will be laid in 1.5x1.5m panels in chess board fashion separated by glass panel members to avoid shrinkage cracks, all tools, tackles, materials, manpowers, equipments, machinery etc., as per specification, drawings and as directed by Engineer-in-charge. |
| 17 | Providing of single Rebatesolid doorframe ofSize 100X75 mm thick factory made wood Polymer Composite (WPC)(IVORY color) of approved make (Ecoste/HARDY PLAST orother equivalent make ) having density of 900 kg/Cum, water absorption less than 1% and tensile strength greater than 12 MPaall complete as per specification and as directed by Engineer in Charge. |
| 18 | Providing of single/double leaf of 35 mm thick non decorative type factory made wood Polymer Composite (WPC) solid doorshutters both side pre-laminated of approved make ( ecoste orother equivalent make ) having density of 900 kg/Cum, water absorption less than 1% and tensile strength greater than 12 MPaall complete as per specification and as directed by Engineer in Charge. |
| 19 | Providing and fixing IS:12817 market Stainless steelbutt hinges of size 125 x 64 x 2.5mm (heavy weight) \"GARG\" or equivalent approved make with suitable stainless steel screws etc. complete all as per specification and as directed by Engineer-in-charge. |
| 20 | Providing and fixing Stainless steel tower bolts of size 300 x 12mm \"GARG\" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge. |
| 21 | Providing and fixing Stainless steel tower bolts of size 200 x 12mm \"GARG\" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge. |
| 22 | Providing and fixing Stainless steel \"C\" type door handles 10mm dia SS 304 garde solid rod, 200mm long in steel door/wooden door including SS screws/ bolts etc. all as per drawing and specifications complete. Sample to be approved by the Engineer-in-charge. |
| 23 | Providing and fixing Stainless steel aldrop of size 250mm long \"GARG\" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge. |
| 24 | Providing and fixing Alu. hanging Heavy Quality floor door stopper ISI Marked with twin rubber stopper anodised ( Anodic coating not less than Grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all asper specification and as directed by the engineering incharge. Sample to be approved by the engineering incharge. |
| 25 | Providing and fixing 6 Lever brass Mortice lock \"Godrej/Everite\" or other approved equivalent make suitable for flush door with a pair of keys complete all as per specification and drawings. |
| 26 | Providing & Fixing6mm thick Non asbestos cementcorrugated roof and cladding sheets , reinforced with High Impact Polypropylene (HIPP) fibres , Everest Hi-Tech or other approved equivalent make of PVA fibres andcoated with high quality acrylic emulsion paint two coats over a coat of primer Top & bottom, the rate includesproviding and fixing Corner /Unserrated adjustable hips/flashing 90 DEGREE Angular ridges, cladding, profile ridges ( High Impact Polypropylene fiber reinforced Everest )side lap shall be minimum one and half corrugations & 150mm end to end lap over a roof & cladding at site.as per site dimensions including cutting, altering, J bolt , EPDM washer, sealent& scaffoldingetc., complete all as per specifications, drawings and as directed by the Engineer-in-charge. note:- the measurment for roofing sheet actually laid shall be taken for the finished work in superficial areas flat in the plain of the roof and not girthed. the laps between corrugated sheets both at ends and at the side shall not measured. |
| 27 | Providing and fixing single skin Trapezoidal profiled Bare galvalume Roof sheeting of 730 -1020mm cover width 28-32 mm crests depth at 186-250 c/c ( Above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material is manufactured out of 0.45 mm BMT (Base Metal thickness) Hi-Tensile steel with min. 550Mpa yield strength coated with hot dip metallic zinc-aluminium alloy coating Zincalume AZ-150 (as per AS1397) as 150 gms/sq.mt total on both sides of Zinc ( 45 %) & Aluminium (55%). The Steel manufacturers test certificate for the chemical and mechanical properties of steel must be submitted for approval prior to installation. The sheet shall have brand marking of the manufacturer on the back of the sheet at every 1 metre c/c for conforming genuinity of the material. The steel sheet shall be fastened using Class 3 (as per AS3566) of size as per design, galvanized hex self-drilling fasteners of approved make (TATA bluescope or equivalent) and quality including EPDM/neoprene washer on each crest of sheets for connecting with purlins (or as per design). |
| 28 | Providing and fixing G.I. Chain link fencing conforming to IS 2721 of required width in mesh size 50 x 50mm, made of G.I. wire 3.15mm diameter, strengthening with top, middle & bottom line G.I.wire 4mm diathe rate includes providing 0.75mm thick HGRT Polyvinyl chloride coat of approved colour over 3.15mm & 4.00 mm G.I.wire, including necessary binding wire, and fixing withbolts, nuts and 60mm G.I.Washers etc.,complete all as per specifications and as directed by the Engineer in charge. |
| 29 | Providingand fixing Barbed Wire Fencing with new G.I. barbed wire(TATA make)Confirming to IS‑278‑1978TYPE‑B(Glidden type) and dip Chromate Conversion Coatingconforming IS‑1340‑1977 including HGRT coat ( 0.50 to 0.75 mm thick) over barbed wirecomplete all necessary tools, scafolding etc. andas per specification anddirection of Engineer‑in‑Charge. |
| 30 | Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless screws all complete as per architectural / drawings and directions of Engineer-in-Charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately). Note: 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutter in top & bottom horizontal members internally connecting vertical members and fixed with M.S. washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. |
| 31 | Providing IS:12817 marked Stainless steelbutt hinges of size 125 x 64 x 2.5mm (heavy weight) \"GARG\" or equivalent approved make with suitable stainless steel screws etc. complete all as per specification and as directed by Engineer-in-charge. |
| 32 | Providing and fixing in position 5.0 mm thick tinted colour Float glass pane in aluminium doors, window, vantilator shutters of approved quality (SAINT GOBIN) including EPDM rubber / neoprene gasket / glass putty,mastic, etccomplete all as per specifications and as directed by the Engineer in charge. |
| 33 | Providing and fixing in position 6.0 mm thick toughned and tinted colourFloat glass pane in aluminium doors, window, vantilator shutters of approved quality (SAINT GOBIN) including EPDM rubber / neoprene gasket / glass putty,mastic, etccomplete all as per specifications and as directed by the Engineer in charge. |
| 34 | providing and fixing best Quality EPDM rubber / Nylone/neoprene gasketbeading for windows/doors etc. all as per specifications and as directed by Engineer-in-Charge. |
| 35 | providing and fixing best Quality lock for aluminium windows, including C.P brass screws etc., for maintance work complete all as per specifications and as directed by Engineer-in-Charge. |
| 36 | providing and fixing best Quality S.S screws all sizes for windows/doors sections and maintance work etc. all as per specifications and as directed by Engineer-in-Charge. |
| 37 | providing and fixing best Quality wheels for sliding windows with screws etc., complete all as per specifications and as directed by Engineer-in-Charge. |
| 38 | Repairing , removing and refixing door/window fittings, door closer, aldrop, tower bolt, door stopper, door handles, door hinges, sizing of door,dismentling concrete and plaster , adjusting and refixing the door frame, applyingpainting etc., the rate including tools and tacklescomplete all building related carpentry works asdirectd by the Engineer-In-Charge.Note: 1. Supply of One Carpenter & One helper for eight hours work. 2. fittings shall be supplied by the department. |
| 39 | Repairing brick work, plaster, R.C.C ,flooring ,IPS, making brick/ concrete pedstrals, fixing shuttering, excavation, earth filling, dismentling concrete and plasteretc.,complete all building related masonary works as per specifications and as directed by Engineer in charge. Note:1.Supply of One Mason & one Helperfor eight hours work. 2.Raw materials require for the work shall besupplied by the department. |
| 40 | Servicing,Fabrication and Maintenance of Aluminium doors/ Window frames, shutters, Entry Doors and Door panels, Ventilators including the providing andreplacement of broken glass, aluminium sections of different cross section,EPDM rubber / neoprene gasket , button type locks, rollers, screws etc in different buildings at PRP site at all heights ofBldg, and fixing them back in orginal position, including scaffoldingetc.,complete all as per specifications and as directed by the Engineer-in-Charge. (Note : Operation. means supply of oneAluminium Fitterfora day [eight hours ] to execute the above work) |
| 41 | Servicing,Fabrication and Maintenance of Aluminium doors/ Window frames, shutters, Entry Doors and Door panels, Ventilators including the providing andreplacement of broken glass, aluminium sections of different cross section,EPDM rubber / neoprene gasket , button type locks, rollers, screws etc in different buildings at PRP site at all heights ofBldg, and fixing them back in orginal position, including scaffoldingetc.,complete all as per specifications and as directed by the Engineer-in-Charge. (Note : Operation. means supply of oneHelperfor aluminium fittera day [eight hours ] to execute the above work) |
| 42 | Providing and applying Berger or approved equivalent make premium weather coat long life 10 exterioremulsion paint added with PU and silicon of accepted shade & color in two or more coats over a coat of Damp shield paintto give an even shade on all plastered / Rough cast surface of External / Internal walls at all heights. The rate shall be inclusive of surface preparation, applying putty, scaffolding, filling the cracks with Berger (Home shield) or approved equivalent crack fill paste , water jet cleaning of existing external surface, preparing the base , sandring the surface with sand paper, washing and scrubbing with coir/wire brush, attending to broken edges /corners or patches of plastered surface, etc. complete all as per technical specification and as directed by Engineer-in-charge. |
| 43 | Providing and applying Berger or approved equivalent make premium weather coat long life 10 exterioremulsion paint added with PU and silicon of accepted shade & color in two coats paintto give an even shade on all plastered surface of External / Internal walls at all heights. The rate shall be inclusive of surface preparation, applying putty, scaffolding, filling the cracks with Berger (Home shield) or approved equivalent crack fill paste of existing intrenal surface, preparing the base , sandring the surface with sand paper, attending to broken edges /corners or patches of plastered surface, etc. complete all as per technical specification and as directed by Engineer-in-charge. |
| 44 | Providing and applying Berger or approved equivalent make premium weather coat long life 10 exterioremulsion paint added with PU and silicon of accepted shade & color in one coats paintto give an even shade on all plastered surface of Internal walls at all heights. The rate shall be inclusive of surface preparation, applying putty, scaffolding filling the cracks with Berger (Home shield) or approved equivalent crack fill paste of existing intrenal surface, preparing the base , sandring the surface with sand paper, attending to broken edges /corners or patches of plastered surface, etc. complete all as per technical specification and as directed by Engineer-in-charge. |
| 45 | Providing and applying Berger or approved equivalent make premium weather coat long life 10 exterioremulsion paint added with PU and silicon of accepted shade & color in two coats paintto give an even shade on all plastered surface of Karb walls. The rate shall be inclusive of surface preparation, applying putty, filling the cracks with Berger (Home shield) or approved equivalent crack fill paste of existing intrenal surface, preparing the base , sandring the surface with sand paper, attending to broken edges /corners or patches of plastered surface, etc. complete all as per technical specification and as directed by Engineer-in-charge. |
| 46 | Providing and Painting Two coats of synthetic enamel paint of approved colour over a coat of primer forDoor shutter/window and Frame workand making the surface by scaffolding, scraping, rubbing, applying putty / wood filler etc. compled all as perspecifications and as directed by the Engineer-in-Charge. |
| 47 | Providing and Painting Two coats of synthetic enamel paint of approved colourforDoor shutter/window and Frame workand making the surface by scaffolding, scraping, rubbing, applying putty / wood filler etc. compled all as perspecifications and as directed by the Engineer-in-Charge. |
| 48 | Providing and painting with Epoxy Paint (two or more coats) for Roof trusses and Structural steel work using MRF Vapocure/APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacture specifications including a priming coat, preparation of surface and etching with 10%commercial Hydrochloric acid wherever necessary an neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping,applying sand paper,filling the holes, joints, cracks if any, etc.complete all as per manufactures Technical Data and as directed at site to achieve 200micron dry film thickness(50 micron primer coat and 150 micron finishing coat ). contractor has to provide Elcometer sampling sheeta etc. at his cost for testing film thickness complete all as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 49 | Providing and fixing the 20mm outer dia CPVC pipe wall thickness minimum 2 to 2.5mmChlorinated Poly Vinyl Chloride ( CPVC)pipes FlowGuard/Jain/Kissan orother approved equivalent make havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) includingjointing of pipes & fittings with one step CPVC solvent cement, wall chasing , fixing the pipe with clamps at 1.00 m spacing and testing the line etc., comple all as perspecifications and as directed by the Engineer-in-Charge. |
| 50 | Providing and fixing the 25mm nominal size( CPVC)pipes thickness 2.6 to 3.10mmChlorinated Poly Vinyl Chloride ( CPVC)pipes FlowGuard/Jain/Kissan orother approved equivalent make havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) includingjointing of pipes & fittings with one step CPVC solvent cement, wall chasing , fixing the pipe with clamps at 1.00 m spacing and testing the lineetc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 51 | Providing and fixing the 32mm nominal size ( CPVC)pipes thickness 3.2 to 3.7mmChlorinated Poly Vinyl Chloride ( CPVC)pipes FlowGuard/Jain/Kissan orother approved equivalent make havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) includingjointing of pipes & fittings with one step CPVC solvent cement,fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge. |
| 52 | Providing and fixing the 40mm nominal size( CPVC)pipes thickness 3.8 to 4.3mmChlorinated Poly Vinyl Chloride ( CPVC)pipes FlowGuard/Jain/Kissan orother approved equivalent make havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) includingjointing of pipes & fittings with one step CPVC solvent cement,fixing the pipe with clamps at 1.00 m spacing and testing the lineetc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 53 | Providing and fixing the 50 mm nominal size ( CPVC)pipes thickness 4.9 to 5.5 mmChlorinated Poly Vinyl Chloride ( CPVC)pipes FlowGuard/Jain/Kissan orother approved equivalent make havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) includingjointing of pipes & fittings with one step CPVC solvent cement,fixing the pipe with clamps at 1.00 m spacing and testing the lineetc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 54 | Manual Boring/drilling bore well of required 150mm dia upto 10mtr depth from ground level. the rate inculding providing 150mm dia PVC pipe (Finolex,Ashirvad,Astrol) for casing, drilling holes at the bottom of PVC pipe upto 1.5m height, the base of the pipe should be with end cap, fixing nylone mesh upto 1.5m from the bottom and providing fixing 100mm dia pipe into the casing pipe etc, all complete as per direction of Engineer-in-charge. |
| 55 | Providing laying and fixing 76mm OD PVC pipes and specials. with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilised - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe with necessary PVC clips and jointsetc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 56 | Providing laying and fixing 110mm OD PVC pipes and specials. with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilised - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe with necessary PVC clips and joints etc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 57 | Providing and fixing 110mm OD best quality PVC pipes -Type A (Suitable for ventilation work and rain water applications) confirming to IS - 13392 - latest edition, with ISI mark and heavy quality specials such as bends, shoes etc. with ISI mark including fixing to the wall with adequate no. of G.I. clips for rain water down take pipes etc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 58 | Providing and fixingPVC SWR Rain water pipe 160mm outer diabest quality PVC pipes -Type A (Suitable for ventilation work and rain water applications) confirming to IS - 13392 - latest edition, with ISI mark and heavy quality specials such as bends, shoes etc. with ISI mark including fixing to the wall with adequate no. of G.I. clips for rain water down take pipes etc., complete all as perspecifications and as directed by the Engineer-in-Charge. |
| 59 | Repairing , removing and refixingall plumbing fitings , flush tank, washbasin, urinal, over head water tank float valve,all internal G.I. lines,under ground G.I. lines , Over head tank inlet and out let wall mounted G.I. lines, excavation,dismentling concrete and plaster , C.I.line jointing, C.I.line laying,Rain water pipes,taps, stopcock, gate valve , removing chockes in toilets andurinals etc., the rate including tools and tacklescomplete all as directd by the Engineer-In-Charge.Note: 1.Supply of One Plumber & One Helper for eight hours work.2. G.I. pipes , sparesandplumbing fittings shall be supplied by the department. |
| 60 | Cleaning ofsewer lineof all sizes including disposal of sludge as per specification and as perspecifications and as directed by the Engineer-in-Charge. |
| 61 | Supply, mixing and placing in position the Micro Concrete MasterEmaco S348 of BASF/ RENDEROC RG (S) of FOSROC or equivalent product approved by the engineer-in-charge as per the list mentioned in the Specific requirements under Notes to the Agency as per the manufacturer\"s recommendations as directed by the Engineer-in-charge, including mixing in suitable and approvedmixing machine, pumping of micro concrete under pressure using approved Pneumatic pumps or manually so as to ensure that the concrete laid for encasement in dense, properly compacted, free from honey combs etc all as directed and approved by the Engineer-in-charge. |
| 62 | Supply and application of two coats of anti corrosion primer MasterEmaco P130 of BASF /NITOZINC PRIMER of FOSROC or equivalent product approved by the engineer-in-charge as per the list mentioned in the Specific requirements under Notes to the Agency as per manufacturer\"srecommendation to the exposed steel reinforcement including manpower, brushes, scaffolding arrangements etc., complete all as per specifications and as directed by the Engineer-in-Charge. |
| 63 | Providing and application of bonding agent with long open time at all heights MASTER BRACE 1414 of BASF or equivalent product approved by the engineer-in-charge as per thethe Specific requirementsand applicationof bonding agentas per manufacturer\"s recommendation etc., complete all. as per specifications, drawings and as directed by Engineer-in-charge. |
| 64 | Providing 50kg cement bags 43 grade penna/ultratech makeconforming IS 269 for repairing works, the rate including transportation up to PRP site, loading and unloading etc., complete all as per specifications and as directed by Engineer-in-charge. |
| 65 | Providing and mixing MasterEmaco SBR 2 in plastring mortor for RCC old structures BASF/FOSROC construction chemicals make or approved equivalent includingtransportation etc., complete allas per specifications, drawings and as directed by Engineer-in-charge |
| 66 | Providing ,fixing & removing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge.The elevational area of the scaffolding shall be measured for payment purpose. |
