|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.As per DSR No.13.88 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.As per DSR No.15.56 |
| 3 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand).As per DSR No.13.16.1 |
| 4 | Disposal of malba. Up to 10.0 KM.As per DSR No.1.1.18 |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in With cement mortar 1:4 (1cement: 4 coarse sand) patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.complete As per DSR No.14.1.2 |
| 6 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.Per bag of 50 kg cement used in the mixAs per DSR No.13.21 |
| 7 | Steel Painting :(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.As per DSR No.13.50.3 |
| 8 | Steel Painting :(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.As per DSR No.13.62.1 |
| 9 | Removing paint or warnish with paint remover including supply of all material labour T&Petc. Required for proper completion of work. As per DSR No.657 |
| 10 | Two coat painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : As per DSR No.13.99.1 |
| 11 | Providing and laying Vitrified tiles in floor in different sizes (lhickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cemenl: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with lhe zero chipping diamond cufter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid flnish of size. Size of Tile 600 x 600 mmAs per DSR No.11.41A.3.1 |
| 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm As per DSR No.8.2.2.2 |
| 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.As per DSR No.8.3.2 |
| 14 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes As per DSR No.10.30.1 |
| 15 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm With 2nd class teak wood beading 62X19 mm all complete.As per DSR No.9.135.1 |
| 16 | Supply and laying of M.S. Wire mesh (rabbit) As per DSR No.item No. 1220 |
| 17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface additives of required shadeAs per DSR No.13.112.1 |
| 18 | Wall painting with two coats premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.As per DSR No.13.83.2 |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As per DSR No.13.8 |
| 20 | Providing and fixing lSl marked flush door shutters conforming to lS :2202 (Parl l) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including lsl marked Stainless Steel bun hinges with necessary screwsAs per DSR No.9.21.2 |
| 21 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.As per DSR No.22.6 |
| 22 | Scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in-Charge.As per DSR No.M.R. |
| 23 | Making plinth protection 50 mm thick of cement concrete 1:3:6(\"l cement : 3 coarse sand (zone-lll) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from naturalsources) over 75 mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.As per DSR No.4.17 |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources)As per DSR No.4.1.3 |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsAs per DSR No.17.1.1 |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm dia (for rain water)As per DSR No.12.41.2 |
| 27 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Plain bend 87.5 deg 110 mm diaAs per DSR No.12.42.5.2 |
| 28 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm diaAs per DSR No.12.43.2 Please Enable Macros to View BoQ information |
