|
| 1 | Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil . |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 5 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 6 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flas 30x6mm for diagonal braces and central cross piece. |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 8 | Centering and Shuttering including strutting, popping and removal of form work |
| 9 | 15mm Cement plaster on the rough side of single orhalf brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 10 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement:3 fine sand) |
| 12 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.40mm thick with 20 mm nominal size stone aggregate |
| 13 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 14 | Painting with synthetic enamel paint of approved brandand manufacture of required colour to give an even shade.Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brandand manufacture. |
| 15 | White washing with lime to give an even shade on New Work (three or more coats) |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Internal work15 mm dia. nominal bore medium |
| 18 | Providing and fixing PVC soil waste / rain water disposal pipe |
| 19 | Providing and fixing PVC BEND |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license C.P. BRASS FITTINGS |
| 21 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 22 | Carriage of sand by Mechenical Transport including loading , unloading & stacking complete lead upto 18km |
| 23 | Carriage of stone Aggregates by Mechenical Transport including loading , unloading & stacking complete lead upto 35km |
| 24 | Carriage of sand by manual means including loading , unloading & stacking complete lead upto 500m |
| 25 | Carriage of Stone Aggregates by manual means including loading , unloading & stacking complete lead upto 500m |
| 26 | Carriage of STONE by manual means including loading , unloading & stacking complete lead upto 200 mtr Please Enable Macros to View BoQ information |
