|
| 1 | Tile work in skirting, risers of steps and dado upto 2m height over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry @3.3kg/sqm including pointing in white cement mixed with pigment of matcvhiing shade compete. Marble tiles (polished) Raj nagar 8mm thick |
| 2 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering. 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded Brick aggregate 40mm (nominal size). |
| 3 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) : 3 graded stone aggregate 200 mm nominal size |
| 4 | S/F of inauguration board with granite with padestal etc all complete. |
| 5 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigements etc. complete. Size of tile 600x600mm |
| 6 | Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 15\" landing, bolconies, shelves, chajjas, lintels , bands, plain, window sills, stair cases and spiral stair cases above plinth up to floor five, level excluding the cost of centering, shuttering, finishing and reinforcemen, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded). |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeupto plinth level. Thermo mechanically treated bars of grade Fe-500D or more. |
| 8 | Centering & shuttering including strutting, propping etc and removal of form work lintles, Columns, piers, abutments, pillars, posts and struts |
| 9 | Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level up to floor V level in all shapes and sizes cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | 12mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) |
| 11 | Construction of manhole chamber of 0.60x0.60x0.90m internal size with b/w, plaster, cover, C.I. sheet, labour T&P etc required for proper completion of work. |
| 12 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 13 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 14 | Hand wash basin 550x400mm size of white glazed earthen ware (22/16\") |
| 15 | Mirror of Atul make with Indian polish of 600x450mm dia size with beveled edge etc all complete. With hard board sheet with clips for mirror 600x450x5mm |
| 16 | Supply and fixing of P.V.C. doors of 1\" thick commercial quality including fixing and adjustment of hinges, bolts locks, handles spring fitting etc all complete. |
| 17 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usinf structural steel etc as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar work etc all complete. |
| 18 | Applying priming coat over new steel and other metal surface upto 10cm in width or girth or small not exceeding 0.10 Sq.M. area after and including preparing the surface by thouroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushd, fine stell/wood, scrapper and papering and knotting including cost of all materials, labour T&P etc all complete.Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, superlac, Dulux specified brushing to give an even shade and including the cleaning the surface of all dirt and other foreign matter and scoured with wire brushd, fine stell/wood, scrapper and papering including cost of all materials, labour T&P etc all complete. |
| 19 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. But in PVC cunduct with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduct. Wiring points in surface Cinduct with PVC insulated 1100 V grade cable. complete in all respects, a directed. |
| 20 | Wiring point for Fan/fresh air fan (light duty exhaust fan) with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. But in PVC cunduct with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduct. Wiring points in surface Cinduct with PVC insulated 1100 V grade cable. complete in all respects, a directed. |
| 21 | Wiring point for plug with 1.5sqmm FRLSH PVC installed multistrand single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. |
| 22 | Supply and fixing of switch box made up of 16SWG (1.5mm) thick M.S. sheet of 150 etc all complete. |
| 23 | Supply and fitting of 6Amp to 32Amp SP MCB KA (10KA) legrend hexic etc all complete. |
| 24 | Supply and fixing of hexagonal/round G.P. Fan box of approved make made up of 1.0mm thick I.S.I. Marked G.P. Sheet spot welded four to eight holes of 25.4mm for pipe entry of the box. Fixing with wiring conduit laid in the R.C.C. before concreting along with supply of all material, labour T&P etc reqwuired for proper completion of work. |
| 25 | Supply and fixing of LED tube light with batten suitable for upto 1x22 watt LED. |
| 26 | Providing and fixing of coal home regd. Heavy duty exhaust fan of 12\" size complete. |
| 27 | Supply and fixing of 48\" ceiling fan of standard make bajaj, crompton, usha etc all complete. |
| 28 | S/F of CFL lighting of approved quality etc all complete. (MR) |
| 29 | Supply and installation of 1.5Hp submersible pump with lowering/boring etc all complete. |
| 30 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
