|
| 1 | M&L for Brickwork withfly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius including demolition of old brick bats/stone etc. |
| 2 | Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specifiedand directed. |
| 3 | Supply only liquid water proofing compound all as specified and directed |
| 4 | M&L for cement concrete typeD2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed |
| 5 | M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors,finished rough to receive floor tiles complete all as specified and directed |
| 6 | M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement. |
| 7 | Dismantling floor, stone, hearth or wall tiling/terrazo/sotne slabincluding cement mortar bedding complete or in patches and removing rubbish off the premises completeall as specified and directed. |
| 8 | M&L for glazed coloured ceramic tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4,complete all as specified and directed. |
| 9 | M&L for glazed coloured ceramic tiles 300 x 600 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4,complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchincl screeding 15mm thick in CM 1:6, complete all as specified and directed. |
| 11 | All as per Serial item No 10 above but as in vertical surfacesincl plastering 10mm thick in CM 1:4 complete all as specified and directed |
| 12 | M&L forVetrified tiles light shade 8 to 10 mm thick (square) polished, size of each tiles 600 x 600 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed |
| 13 | All as per serial item No 12 but as in vertical surfacesincl plastering 10mm thick in CM 1:4,complete all as specified and directed |
| 14 | M&L forVetrified tiles light shade 8 to 10 mm thick (square) polished, size of each tiles 600 x 1200 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed |
| 15 | All as per serial item No 14 but as in vertical surfacesincl plastering 10mm thick in CM 1:4,complete all as specified and directed |
| 16 | M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4,complete all as specified and directed. |
| 17 | S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over a scree bed of 15mm thick CM 1:6 etc complete all as specified and directed |
| 18 | Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed |
| 19 | S&Fin repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 20 | S&Fin repairs 20 mm dia Mild steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 21 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and faircomplete all as specified and directed. |
| 22 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair andincluding taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed. |
| 23 | M&L for preparationofnewly plastered surface of walls and applying Two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty ofcomplete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing downwith sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 24 | M&L 15mm thickrenderingon wallsbrick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra Cement and including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified |
| 25 | M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:4 finished even and smooth without using extra cement andincluding taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely |
| 26 | M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof exterior emulsion paint (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) complete all as specified and directed. (Note : Colour and patterns to be applied as per new colour scheme approved by Stn Cdr) |
| 27 | M&L for preparationofnewly plastered surface of ceiling including brooming down or steel wire brushing, scrapping down smoke soot moulds, Moss and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty ofcomplete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing downwith sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 28 | M&L for preparationofold distempered surface of walls including brooming down or steel wire brushing, scrapping down smoke soot moulds, Moss and efflorescent salts and trading oil and greasy spots and applying one coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty ofcomplete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing downwith sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 29 | M&L for preparationofold distempered surface of walls including brooming down or steel wire brushing, scrapping down smoke soot moulds, Moss and efflorescent salts and trading oil and greasy spots and applying Two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty ofcomplete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing downwith sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 30 | M&L for preparationofold distempered surface of ceiling including brooming down or steel wire brushing, scrapping down smoke soot moulds, Moss and efflorescent salts and trading oil and greasy spots and applying one coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty ofcomplete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing downwith sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 31 | M&L preparation of old plaster surfaces and applying one coat of white wash on wallsincluding rubbing down old white wash complete all as specified and directed |
| 32 | M&L for preparation of old decorated surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush and applying one coat of weather proof exterior emulsion paint with airless electric sprayers (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) with airless electric sprayers complete all as specified and directed. (Note : Colour and patterns to be applied as per new colour scheme approved by Stn Cdr) |
| 33 | S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed. |
| 34 | Complete removal of existing treatment from wall surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed. |
| 35 | M&L for applying layer ofbirla wall care putty on wall surfacesincluding rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed. |
| 36 | S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 37 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint inlcudingcomplete all as specified and directed |
| 38 | M&L for preparation of old painted steel surfaces of any description and applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 39 | S&F 15mm bore tubes medium grade galvanisediron with all new fitting and fixed to walls and ceiling or laid in floorsincluding taking down old unserviceable steel tubing complete all as specified and directed. |
| 40 | S&F 20 mm bore tubes medium grade galvanisediron with all new fitting and fixed to walls and ceiling or laid in floorsincluding taking down old unserviceable steel tubing complete all as specified and directed. |
| 41 | S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed (Cera cat No S1053101, Kerovit JS-112, Asian Cat No ECS-21-SH ECS-21-SR* / ECS-21-SO) |
| 42 | S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete includingtrap. (Cera cat No Cat. No: S3020105, Kerovi LOGAN 21\" - KS601, Asian Cat No PN-03-X / PN-03-TX) |
| 43 | S&F in repairs plastic water closet white seat cover closed pattern/Single piece seat with flat bottom cover and mild steelchromium plated or aluminized hinging device complete allas specified and directed |
| 44 | S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipeof PVC 32mm diacomplete all as specified and directed.(Cera cat No B1010110, Kerovit LOGAN 21\" - KS601, Asian Cat No KO1004) |
| 45 | S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed (Cera cat No B1010110, Kerovit LOGAN 21\" - KS601, Asian Cat No KO1004) |
| 46 | S&Fin repairs kitchen sink without drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed. |
| 47 | S&F in repairs plate rack made out of1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed |
| 48 | S&F in repairs waste coupling for wash basin and kitchen sink as specified and directed |
| 49 | S&F in repairsPVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basinincluding socket suitable for waste fitting complete all as specified & directed |
| 50 | S&F in repairs centre hole basin mixture 15 mm dia chromium platedcomplete all as specified and directed. (Cera cat No F2002461, Kerovit KB411027, Parryware Cat No G4715A1) |
| 51 | S&F in repairs Kitchen mixture 15 mm dia chromium platedcomplete all as specified and directed. (Cera cat NoF1015501, Kerovit KB111024, Parryware Cat No G4736A1) |
| 52 | S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed. (Cera cat NoF2002201, Kerovit KA910007, Parryware Cat No G2707A1) |
| 53 | S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. (Cera cat NoF2002152, Kerovit KB1211033, Parryware Cat NoT4606A1) |
| 54 | S&Fin repairs 125x 125mmshower rose of Chromium plated brassfor fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed. (Cera cat NoF7020111AB, Jaguar OHS-CHR-1667, Parryware Cat NoT9850A1) |
| 55 | S&F in repairs chromium plated wall mixture withconnectionfor shower arragement complete all as specified and directed. (Cera cat NoF1020401, Kerovit KB511019, Asian Cat NoPT-11N) |
| 56 | S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed. |
| 57 | S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs. |
| 58 | S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.(Cera cat NoF8030111AB, Kerovit KA580016, Asian Cat NoC232N) |
| 59 | S&Fin repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed. |
| 60 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed |
| 61 | S&F in repairs Chromium plated toilet paper stand as per directed by engg-in-charge |
| 62 | S&F in repairs Chromium plated towel ring as per directed by engg-in-charge |
| 63 | S&F in repairs glass shelf with chromium plated brackets of suitable sizeas per directed by engg-in-charge |
| 64 | S&Fin repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed |
| 65 | S&F in repairs pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed |
| 66 | S&F in repairs stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed |
| 67 | S&F in repairs Stainless steel soap dish , all as directed. |
| 68 | S&F in repairsPVCtoilet cabinet with mirror of size 20\"X16\" of selecred quality complete as specified and directed . |
| 69 | S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrsincluding dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed |
| 70 | S&F rotational moulded polythene water storage tankstripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrsincluding dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed |
| 71 | S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed. (Cera cat NoS1013211, Kerovit KB3007, Asian Cat NoOP-36-S*) |
| 72 | S&F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.(Cera cat NoF1021403, Kerovit KB411018, Asian Cat NoC-218A) |
| 73 | S & F in repairs Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hookscrewecd for iron pipe fancy type long body complete all as specified and directed.Make (Cera cat NoF7030310AB, Kerovit KA510002, Asian Cat NoRSTS301) |
| 74 | S & F in repairs for glass corner shelfin Bathroom 225 x 225 mm with chromium brackets and fixed with screwed in bathroom corners as spd and directed |
| 75 | S&F in repairs stainless steel of AE- SI 316 grade tubular towel rack including a pair of CP brass bracket complete all as specified and directed. |
| 76 | S&F in repairs Vitreous China table/counter top wash basin of suitable sizeincluding SSbottle trap, fixing on counter with SS waste coupling, cp single liver mixer for hot & cold (Make Jaguar, cera, Hindware waste pipecomplete all as specified and as directed. (Cera cat NoCat. No. S2020190, Kerovit YORKSHIRE - KS208, Asian Cat NoTT-31-X) |
| 77 | Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed |
| 78 | S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed. |
| 79 | S&F Mortie lock, verticle type size 100 mm mild steel complete all as specified and directed. |
| 80 | Dismantling of asbestos cement or GI based sheet(corrugated, semicorrugated, etc) sheets in roof coverings |
| 81 | M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets including ridge in roofs, walls etc fixed with L-type or J-type or cranked hook bolts |
| 82 | S&F in repairs prepainted galvalume aluminium zinc coating GI based corrugatedsheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of existing roof covering as specified and directed by engg-in-charge |
| 83 | S&F in repairs prepainted galvalume aluminium zinc coating GI based plainsheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of existing roof covering as specified and directed by engg-in-charge |
| 84 | Repairs to steel windows by replacing alloldfriction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed. |
| 85 | S & F handles/stoppers with welded or revating to steel windowsby replacing allold handles/stoppersmaking the windows functional incl all necessary welding etc as required at site and as directed. |
| 86 | Repair of flush or skelton doors with aluminum /wooden/PVC sheetincluding taking down the door and fitted in same opening |
| 87 | M&L Grinding and polishing to old terrazzo flooring/ skirting, complete all as specified and dirested. |
| 88 | Repairs of WHB mixture/shower pannel/float valves of one piece EWC/angle vagle/bib tap including allrequired accessories as per spd and directed |
| 89 | M&Lforpolishing to old wall panneling, complete all as specified and dirested. |
| 90 | Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removingfrom the premises complete all as spd and directed |
| 91 | Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removingfrom the premisescomplete all as spd and directed |
| 92 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqmincl removingfrom the premises complete all as spd and directed |
| 93 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed. |
| 94 | S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solventcement, supply and fixing in the frame at site as specified of drawing. |
| 95 | S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge |
| 96 | S& Ffor Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 97 | S&F 2nd class hardwoodglazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats |
| 98 | S&F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer\"s specification and drawing. |
| 99 | S&F in repairs factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive).complete as per direction of Engr-in-Charge. |
| 100 | S&Fin repairs PVC boards 18/19 mm thick any colour/ prelaminatedas in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer\"s instructions including piano hinges, magnet catcher, handles etc. omplete as per direction of Engr-in-Charge. |
| 101 | S&F in repairs PVC boards 5 mm thick any colour/ prelaminatedas in fixed in almirah/wallor as per direction of Engr-in-Chargeetc. |
| 102 | S&F in repair powder coating aluminium frame for doors,windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) |
| 103 | S&F in repair powder coating aluminium door/window/ventilator shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) NOTE :( Both shutter ie Glass and wire mesh measured at one unit) |
| 104 | S&F in repair aluminium powder coated (minum 50 micron) anodised partition wall with aluminium frame of size :a) Single Groove Section: 100 x 40 x 1.20 mm thick b) Double Groove section: 100 x 40 x 1.10 mm thick duly fitted with neosprene rubber beading,frostedglass panes 5 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with \"U\" channels at top joining partatio complete all as specified. |
| 105 | S&F anodised aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :100x40mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 106 | S&F anodised aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality) on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :68.4x38mm X 1.15 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v) Aluminium fittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 107 | M&L in repairs for Improved cupboard (Kitchen cabinet) made of 18mm thick prelaminated PVC board exterior gradewirh one side decorative lamination glossy finish & other side plain white in shelves, side back and doors including PBV Liping on all exposed edges of same texture & shade to match that of laminat, fitted with selected quality improved type stainless steel hydraulic concealed hinges of (Make Hettich cat No ONSYS 4447i product code 928143200/ Kaff nickel SC hinges 100 code No KHSC-0/Godrej product code 6933, Baan code LKYAHCHR4) fancy type 200mm long stainless steel handles, magnate catcher on each shutter as requitedetc complete all as specified and directed. Note - Area shall be measuered flat on face of the cupboard 1, Design & layout of cabinaet and pattern/ colour of laminate shall be as approved by GE. |
| 108 | M&L in repairs for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approvedby GE the foloowing size in each kitchen.(a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm of 02 nos (b)multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE(c)Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (GodrejProduct code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm(d)Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm(f)dust bin as reqd 01 NosMake 200 series of Hettich |
| 109 | S&F Sheet glass, ordinary quality and glazing with oil putty in square but n exc 0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture |
| 110 | S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . |
| 111 | S&F in repairs 140 mm double legged door stopper of aluminium alloy with rubber complete all as specified and directed |
| 112 | S&F Butt hinges, medium weight, Stainless steel and fixed of size 150mm. |
| 113 | S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed. |
| 114 | S&F aluminum anosided handle 150mm long of extruded section and fixed. |
| 115 | M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 116 | S&F in repair 300mm sizealuminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed. |
| 117 | S & F of wooden door stoppers between chowkat and shutters including 100mm butt hinges fixed on chowkat complete all as spd and directed |
| 118 | M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pinkprimer over 10 cm width or girth complete . |
| 119 | M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer |
| 120 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed |
| 121 | S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 122 | S & F in repairsstainlesssteelwire mesh 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed |
| 123 | S&F in repairs150mm helical door spring complete all as spd and directed |
| 124 | M&L in repairs 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed . |
| 125 | Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 126 | S&F PVC(SWR) 110mm diasoil waste and rainwater drainage pipes single socketedin any length withrubber ring joint fixed to wall complete all as specified and directed |
| 127 | S&F PVC (SWR) 110mm dia bends complete all as specified and directed. |
| 128 | M& L for providing precast cement concreterubber moulded chequeredcolouredtiles 300x 300 mm and20 to25 mm thick even finished on topof approved design and pattern over 20 mm screed beding complete all as specified and directed |
| 129 | M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion includingfilling the joint with sand complete all as specified and directed |
| 130 | M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishingsufaces even and smooth without using extra cement complete all as specified and directed |
| 131 | M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja/ mud stoppers(thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed. |
| 132 | Taking down hood covers ofrolling shutters of areanot exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of anysize and refixing covers in position after repairs complete all as specified and directed. |
| 133 | Notes:-Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. |
