|
| 1 | Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed. |
| 3 | Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed |
| 5 | Demolition and breaking up drain CI pipe/AC pipes/ PVC Pipe set in cement mortar 100 mm and below complete all as specified and as directed. |
| 6 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames)n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed |
| 7 | All as per item No 6 above but .exc 1.50 Sqm but not exc 4.00 Sqm complete all as specified and as directed. |
| 8 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed |
| 9 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm of wall thicknessnot less than 4mm complete all as specified and as directed. |
| 10 | S&F PVC(SWR) bends 110 mm dia with access door complete all as specified and as directed. |
| 11 | M&L brick work with sub class \"B\" brick, straight or curved on plan exc 6 M Mean radius built in type CM 1:6 complete all as specified and as directed. |
| 12 | All as per srl item No here in before but except brick only complete all as specified and as directed. |
| 13 | M&L for walling of randomrubble masonary, Square, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed. |
| 14 | All as per srl item No 13above but except stone masonry complete all as specified and as directed. |
| 15 | M & L rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement as in manholes, septic tank, filter bed out let drain, bdy walls, drains etc all as directed |
| 16 | M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed inCM (1:3) complete all as specified and as directed. |
| 17 | S&F powder coated aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron) , aluminium sectionweighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydrolic door closer-01 No, pivet with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges,etc. complete all as specified and as directed. |
| 18 | S&F Powder coated (50 micron of approved colour) Aluminum anodised sliding/openable window (glazed or wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm includingall fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter with aluminium grillsincluding all accessories andcomplete all as specified and as directed. |
| 19 | S & F 1st class hardwood (Teak/Sal) concealed frame or chowkats plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed. |
| 20 | S&F 35mm thick Flush shutters, solid core construction, with BWR(boiling waterproof grade) plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. Make : Century/ Greenply/ Kitply/Archid. Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim.(ii) all edges shall be sealed with hardwood lipping or PU sealer with polish. |
| 21 | S&F 1mm thick wood grain printed Sunmica/PVC sheet (Design as approved by Engr in Charge) fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and as directed. |
| 22 | M&L for Almirah/cabinet/cupboard required size at site made out 18 mm thick one side decorative lamination sheet/sunmica consisting of 18/20 mm thick plyboard including bracket,s SS screws, bent finish, necessary drawer, openable shelve with frame work complete as per make and specificationwith locking arrangement approved by Engr-in-Charge. Make : Century/Greenply/Kitply/Archid Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim.(ii) all edges shall be sealed with hardwood lipping or PU sealer with polish. |
| 23 | S&F stainless steel butt hinges 200 mm long complete all as specified and as directed. |
| 24 | S&F 100 mm long brass tower bolts, fixed in screws complete all as specified and as directed |
| 25 | S&F brassdoor handle, 300 mm size, complete all as specified and as directed by Engr-in-charge. |
| 26 | S&F300mm long brasssliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed. |
| 27 | S & F of 150 mm size (Overall length of cover plate) floor door stopper of brass and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 28 | S&FPVC steel catcherof superior quality all as specified and directed by Engr in charge |
| 29 | S & F Hettich soft closer hinges of stainless steel premium quality complete all as specified and as directed. |
| 30 | S & F 30 mm width of flap Continuous (Piano) hinges, mild steel, bright finish orelectro galvanised complete all as specified and as directed. |
| 31 | M&L for vitrified tiles light shade double charged glossy finish of 8-10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqmas in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4complete all as specifed and as directed. |
| 32 | M&L for Non skidceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18Sqm or of size as approved as in floors set and jointed in neat cement slurryand pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 33 | M&L for Glazed ceramic coloured tiles 300mm x 600mm x 7mm thickas in vertical surfaces of walls, set and jointed inneat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed. |
| 34 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm including taking down steel tubing with connections complete all as specified and as directed. |
| 35 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm including taking down steel tubing with connections complete all as specified and as directed. |
| 36 | S&F in repair angle valve of brass fancy type,chromimum plated with long shankcast copper alloy screwed down high pressurewith capstan head for iron pipe 15mm bore, complete all as specified and as directed.Make : Jaquar Cat No FON-40053 or its equivalent in Hindware/Cera/Parryware |
| 37 | S&F in repair PVC connection 15 mm size with PTMT nuts600mm long,complete all as specified and as directed. |
| 38 | S&F in repair Single piece Water closet wall mounted pattern coloured of size : 370x695x795 mm as approved with connected accessories complete all as specified and directed by Engr-in-Charge . Make : Jaquar Cat No KUS-WHT-35851S300UF or its equivalent in Hindware/Cera/Parryware |
| 39 | S&F in repair WHB coloured 420mm x 420 mm x 155mm with connected accesories as approved and complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat No CNS-WHT-905 or its equivalent in Hindware/Cera/Parryware |
| 40 | 15 mm bore mixerwith round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed. Make: Jaquar, Cat Part No CON 167KNB and equivalent in CERA/Parryware. |
| 41 | 125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed. |
| 42 | 15 mm bore long body Bib tap in repair complete all as specified and directed. Make : Jaquar Cat Part No CON-037KN and equivalent in CERA/Parryware. |
| 43 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent . |
| 44 | Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/Parryware. |
| 45 | 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA/Parryware. |
| 46 | Soap dish in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA/Parryware. |
| 47 | M&L for complete removal of existing treatment on walls/roof projection including facia, cornices etc scrapping with (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500-2700 rpm with internal dust extraction system for clean environment all as directed. |
| 48 | Preparation of old plastered/scrapped surface of wall/ceiling by filling cracks by external wall putty/ crack fill paste and applying exterior water proof wall care putty @ 1 Kg (undiluted) per sqm of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces complete all as directed |
| 49 | M&l for grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer complete all as directed |
| 50 | M&L for priming coat of exterior primer applied @ 0.9 ltr (undiluted)/10 Sqm over old putty surface of wall/ceiling complete all as specified and directed |
| 51 | M&L applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives & colour stay technology, excellent dirt pickup resistance @ 1.79 litre/10 Sqm diluted with water as per manufacturer instruction, Paint usingAirless spray technology with max working pressure of 3300 PSI and capable of opening single spray gun with a mix material hose length of 30 mtr the spray machine should be reputed brands. Make : Asian Paints Apcolite Premium Emulsion,Birla Opus Calista (Premium), Berger Elegance, Nerolac Beauty Gold Washable / Washable Plus.Note : Material directly procured from authorised dealer of manufacturer andwhich will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor |
| 52 | M&L for Plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in surface chanels and drains, manhole complete all as specified. |
| 53 | M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching, haunching , coping, edging of path and similar work incl necessary form work complete all as specified and directed. |
| 54 | M&L for 75 mm thick plain cement concretetype D-2 (1:4:8) (40 mm graded stone aggregates) as in sub basecomplete all as specified and directed. |
| 55 | M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick setjointed andpointed in neat cement slurry in floor with grey cement and pigment all as specified and directed. |
| 56 | M&L for 15 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor complete all as specified and as directed. |
| 57 | M&L forheavy duty coloured (Dura stone) tiles n exc 0.36Sqm of 8-10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match complete all as specified and directed. |
| 58 | M&L for glazed ceramic wall cladding coloured tiles 300mm x 450mm x 7mm or 300x600x7-10mm thick (design and size as approved by Engr in Charge)as in vertical surfaces of walls, set and jointed inneat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 or chemical adhesive as directed by Engr in Charge complete all as specified and as directed. Make : Somany Clador Atico Blue or Kajaria Vitronite K 34020G or Orient Bell Craftclad Linear Engrave Multi or as approved by Engr in Charge” |
| 59 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 60 | M & L for PCC 1:1.5:3 Type B2 using 20mm graded aggregate as in foundations, filling and mass concreteas padding on roof surface includingwith water proofing compound/admixer like Ulratech Seal & dry SBR or its Equivalent make in Dr Fixit/Fosroc as per manufacture\"s instructions complete all as specified. Note : use concrete mixer for concreting, no hand mixing allowed. Waterproofing compound/admixer shall be paid separately. |
| 61 | Waterproofing compound/admixture Ulratech Seal & dry SBR or its Equivalent make in Dr Fixit/Fosroc as per manufacture\"s instructions complete all as specified and as directed. |
| 62 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tar felt and brushing neat cement slurry @ 3 kg/Sqm. Applying compatible bituminous primer on prepared surfaces and allow it to dry. Provide APP modified polyester reinforced bituminous membrane 4mm thick plain finish with torch the substrate and the underside of the membrane until the bituminous becomes glossy. Press the membrane firmly to ensure full adhesion. Maintain side overlap of 100mm and end overlap of 150mmcomplete all as specified and as directed. Make : UltraTech Weather Pro APP Membrane or equivalent make as directed by Engr in Charge. Note :Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise. |
| 63 | S&F 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions. The fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free complete all as specified and as directed |
| 64 | M&L for 3 coats of Prime B90 elastomeric waterproofing liquid applied membrane which is formulated with acrylic fibres and PU hybrid polymers having crack bridging ability of upto 3mm, tensile strength of 1.8 Mpa, 300% elongation and can withstand upto 12 bars hydrostatic pressure. The coating also provided with anti carbonation properties and ensures surface temperature reduction of upto 12 degree C. Coating to ensure a forced coverage of 10 Sqft/3 coats on terrace and horizontal surface having 33% water dilution in 1st coat and an undiluted 2 coats as per manufacturers instructions complete all as specified and as directed.Make : Birla Opus, Asian Paints/ UltraTech/Dr Fixit. Note :Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise. |
| 65 | M&L for preparation of new steel surfaces of any descripton not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces . |
| 66 | S&F rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed. |
| 67 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed. |
