|
| 1 | Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed |
| 2 | M&L for rendering 10mm thick incement mortar (1:6) on fair faces of brick work or concretesurfaces of wallcomplete all as specified and directed |
| 3 | M&L for preparation ofnew plastered surfaces of wall and applying 3mm thick wall care putty and two coats of distemper oil emulsionover a coat of alkali resistant priming paint complete all as specified and directed |
| 4 | Taking down of chowkats or frames not exc 1.5sqm with shutters (with out taking off shutters from the frames) complete all as specified and directed |
| 5 | S&F for powder coated aluminium, three track sliding window frame of size 91.08x31.75x1.2mm comprising of one No of fly proof shutter and two Nos of glazed shutter frames of size 40x18x1.2mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mmcomplete all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tintcomplete all as specified and directed. |
| 6 | S&F for aluminium (powder coated in approved colour) glazed/ gauzed window shutters with frame, side hung type with sash bars, including necessary joiningcleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as peg stays 150mm long - 01 No, hooks and eyes - 01 Set, hinge type B-21, 100mm long - 01 No, suitable handle - 01 No, locking device, tower bolts 100mm long - 02 Nos. and glazing panels with 5.5mm thick coloured/ tinted glass with rubber beading, glazing clips and gauzing in with stainless steel wire mesh 0.36mm nominal dia of wire with average 1.40mm width of aperture fixed with aluminium \"C\" section, with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as per manufacturer\"s catalogue 7 specifications, complete all as mentioned here in below and as specified and as directed:- |
| 7 | S&F for powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung) and glazing complete with 5.5mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium (anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mmcomplete all as specified and directed. |
| 8 | M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following type with neat cement slury over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of and rounding to edges of stone slabs one edgecomplete all as specifiedcomplete all as specified and directed. |
| 9 | S & F silicon sealant for gap filling between slabs and aluminium frame for stoprain water prevention complete all as specified and directed |
