|
| 1 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil not exceeding 50 m and making good the surface in any type of soil complete all as specified and as directed. |
| 2 | M & L for Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 3 | Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed. |
| 4 | Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mmincluding line wires including strain bolts, binding wire etc complete all as specified and as directed. |
| 5 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and with hexagonal or square nut of exc 5 cm but n.exc 10cm length with dia of neck 11to 15 mm etc, complete all as specified and as directed. |
| 6 | S&F mild steel work post and struts in fencing, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 290 Gde E-165 complete all as specified and as directed. |
| 7 | M&L for framed work as in doors, gates,steel flats of angle Fe -410-W (Gde E-250) quality A qureed section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed. |
| 8 | M&L for mild steel Round bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding complete all as specified and as directed. |
| 9 | S&Fof punched tape concerntina coil (PTTC) 610 mm dia having 50 turns and approx weight 8.75Kg+/-5% and stretches to cover a distance 5-7 meter over Y shape MS section incl necessary binding, complete all as specified and as directed. |
| 10 | M&L for preparation new steel surface of any description over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 11 | S& F staianless plate rack made of 1 mm thick stainless steel SS-304 sheetof size 750 mm x 900 mm x 210mmconsisting of 3 shelf for bowls and one shelf for keepingsix nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE\"s officecomplete all as specified and as directed. |
| 12 | S&F stainless steel sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 13 | M&L for 18 mm thick prelam wood plastic composites (WPC) board having density of 650 Kg/Cum, fixed with screws as in cupboard/ wardrobe/ almirah shutter/kitchen cabinet boxes, including all necessary fittings and fixtures like nickle plated clip hinges, including PVC beading fixed to edges of board complete all as specified and as directed.Note: Pattern & design of WPC board to be decided by GE. |
| 14 | S&F 100 mm size stainless steel handles, complete all specified & as directed. |
| 15 | M&L for granite (of any type) work, 16 to 18mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in 20mm thick screed bed cement screed bed 1:6 or 15mm thick rendering in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding/moulding edges of granite stone with mechnical grinder and dismantling of existing stone slab of any thickness and in any position complete all as specified and as directed. |
| 16 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/ loose soil and getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees exceeding 30 cm girth, complete all as specified and as directed. |
| 17 | M & L for Hardcore of brocken stones or boulders guage exceeding 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not excwwding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 18 | M&L for Cement concrete 200 mm thick type C-2, 1:3:6 (40 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 19 | M&L for 100 mm thick, M-50 grade, machine pressed / vibro mechanically floated fully coloured glossy interlocking paver block with grey cement and pigment, any shape and size conforming to IS - 15658-2006, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, complete all as specified and as directed. Note: -Colour and shape shall be approved by Engr-in-charge. |
| 20 | M & L for cementconcrete 1:3:6 type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops; rounded or chamfered on edges complete all as specified and as directed. |
| 21 | Removing excavated material upto a distance of 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 22 | Taking down steel window/ventilators with frame any size/shape/design and making good the cill/jambs of window with necessary material to recive new windowcomplete all as specified and as directed. |
| 23 | Supply fabricating and fixing of Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequired EPDM rubber/ neoprene gasket etc.Aluminium sections shall be mooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 24 | S&F 4.8mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed. |
| 25 | S&F 4mm thick frosted/pin head sheet glass n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed. |
| 26 | S&F stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and as directed. |
| 27 | M&L for preparation of old steel surfacesof any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed. |
