|
| 1 | PART -I - SPECIAL REPAIRS TO BUILDING NO. P-70 |
| 2 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed. |
| 3 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 4 | Taking out shrubs / vegetation / tree growth from building at any height & any location and applying a Glyphosate pesticide or any other equivalent pesticide in a 10ml of solution with one litre of water on roots using spray gun including taking down cement plaster not exc 0.50 sqm for each tree and making good surface by plastering the same area with 20mm thick plastering in cement mortar 1:4 with WPC and finishing the surface to mathc existing surface with necessary scaffolding and other required T & P complete all as specified and directed. |
| 5 | Demolition of cement conctrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 6 | M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) (Padding concrete) with water proofing compound and finished even and faircomplete all as specified and as directed .Note : Supply only water proofing compound will be measured and paid separately. |
| 7 | M & L for screed bed of mortar 15 mm thick in cement mortar 1:4 for laying APP membrane and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed.Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch \"A\" as supply only. |
| 8 | Supply only Liquid water proofing compound all as specified and directed. |
| 9 | M & L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed by Engineer in charge |
| 10 | Removal of existing waterproofing treatment from RCC roof surface by manual/mechanical means including cleaning the surface thoroughly with wire brushes to remove dust, loose particles, laitance, and all foreign matter, followed by washing with clean water and allowing it to dry; applying neat cement slurry @ 3.0 kg per sqm uniformly; then applying one coat of bituminous primer @ 200 gm/sqm; laying 3 mm thick APP (Atactic Polypropylene) modified bituminous membrane weighing not less than 3.5 kg/sqm reinforced with non-woven polyester mat of min 160 gm/sqm by torch-on method with 75 mm overlap at longitudinal and 100 mm at transverse joints; sealing all joints, corners and angles with CM 1:3 mixed with waterproofing compound as per manufacturer\"s instructions and curing properly; and finally applying aluminium paint @ 100 gm/sqm over membrane on horizontal and vertical surfaces, including necessary scaffolding, T&P complete all as specified and directed. |
| 11 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and as directed . |
| 12 | M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/ 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles and including rendering 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified and as directed . |
| 13 | M & L for Non-Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar (1:6)for laying floor finishes like tiles complete all as specified and as directed . |
| 14 | M & L for Joint free Non-Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar (1:6)for laying floor finishes like tiles complete all as specified and as directed . |
| 15 | M & L for Joint free Non-Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match and rendering 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified and as directed . |
| 16 | M & L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) cement concrete in sub base complete all as specified and as directed . |
| 17 | Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc. complete all as specified and as directed . |
| 18 | M & L for precast cement concrete block masonry with solid blocks exc 10 cm in width and set and jointed in C M 1:6 having ratio of PCC 1:3:6 type C1 (using 20mm graded stone aggregate as directed complete all as specified and as directed. |
| 19 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed . |
| 20 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed . |
| 21 | M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and as directed. |
| 22 | Taking down of chowkhats / frames n exc 1.50 sqm each without taking off shutter each complete all as specified and as directed . |
| 23 | Taking down of chowkhats / frames exc 1.50 Sqm but n exc 4.0 sqm each without taking off shutter each complete all as specified and as directed . |
| 24 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, completeall as specified and directed. |
| 25 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screwscomplete all as specified and directed. |
| 26 | S & F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed. |
| 27 | S & F of Anodised aluminium window powder coating of any colour (Thickness or powder coating not less than 50 micron). and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 28 | S & F of 5.5mm thick Sheet glass, ordinary quality and and glazing with oil putty in square n exc 0.5 sq. m in each pane and sheet glass is ground or obscured or frosted, on one sidecomplete all as specified and as directed . |
| 29 | S & F of 5.5mm thick Sheet glass, ordinary quality and and glazing with oil putty in square exc 0.5 sq. m in each pane and sheet glass is ground or obscured or frosted, on one side complete all as specified and as directed . |
| 30 | S & F of 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 32 | S & F of aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and as directed . |
| 33 | Taking down cement plaster ofany description from brickwall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and as directed . |
| 34 | M & L for 15 mm thick plaster in CM(1:6) on brick work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and as directed. |
| 35 | M & L for 5 mm thick plaster in CM(1:3) on brick work / RCC concrete surfaces of ceilings complete all as specified and as directed . |
| 36 | M & L for rendering 15 mm thick in CM 1:4 on concrete / fairsurfaces of block masonary and including mixing water proofing compound as per manufactureres instructions and finished even and smooth without using extra cement complete all as specified and as directed .Note :- WPC shall be measured and paid for separately. |
| 37 | M & L for preparation of newly plastered ceilingsurfacesand applied three coats of white wash complete all as specified and as directed. |
| 38 | M & L for preparation of old plastered ceilingsurfacesand applied one coats of white wash complete all as specified and as directed. |
| 39 | M & L for preparation of newly plastered wall surfaces and prepare the surface even and smooth,including priming plastered and other surfaces with alkali resistant priming paint and Material and labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work complete all as specified and directed. |
| 40 | M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 41 | Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapersor any other mean and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 42 | Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapersor any other mean including filling depressions of scrapped surface with putty andincluding priming plastered and other surfaces with alkali resistant priming paint and Material and labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work complete all as specified and directed . |
| 43 | Demoltion of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed . |
| 44 | M & L for cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified and as directed . |
| 45 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store complete all as specified and as directed . |
| 46 | 16 mm bore dia |
| 47 | 20 mm bore dia |
| 48 | 25 mm bore dia |
| 49 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store complete all as specified and as directed . |
| 50 | 16 mm bore dia |
| 51 | 20 mm bore dia |
| 52 | 25 mm bore dia |
| 53 | S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white, including trap and connection to drain and flushing pipe (excluding flushing cistern)including seat cover with recessed bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan and Flush pipe of polyethylene of low or highdensity or PVC 32 mm dia, for low level cistern complete all as specified and as directed . |
| 54 | S & F in repair vitreous China squatting pan, \"Orissa patteren, size 580 x 440 mm white, with integral footrests including provision of lime concrete bedding (excluding flushing cisteren and flush pipe) and supply and fixing of Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. |
| 55 | S & F in repairs Vitreous China Wash basins, white, flat back, size 630x450mm, including cutting for and pinning in ends of brackets or erecting stand but inclusive of supply and fixing of wastecouplings and waste pipe complete all as specified and as directed . |
| 56 | S & F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and as directed . |
| 57 | S & F in repair PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and as directed. |
| 58 | S & F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 59 | S & F in repair of two way bib cock chromium plated fancy type 15 mm bore with wall flange complete all as specified and as directed . |
| 60 | S & F in repair fancy type CP pillar tap with capstan heads, spindles and washer plates cofirm to IS 1795 having mark \"Cold\" or \"Hot\"and weight not less than 0.65 Kg complete all as specified and as directed . |
| 61 | S & F in repair 15 mm bore fancy type bib taps long bodycast copper alloychromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed . |
| 62 | S & F in repairs to health faucet with 1200 mm long flexible 32mm dia outlet pipe and having 184.5mm length of handle with wall hook complete all as specified and as directed. |
| 63 | S & F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated complete all as specified and as directed . |
| 64 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longbelow WHB mirror complete all as specified and as directed . |
| 65 | S & F in repairs 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection mm thick of size 800 x 600 mm bevelled edge mirror of selected quality glass having decorative PU frame and fixed to walls using hidden studs complete all as specified and as directed . |
| 66 | S & F in repairs SS cockroach trap / nahani trap having size of 150mm x 150mm in sqaure shape SS 304 Grade glossy finish complete all as specified and as directed. |
| 67 | S & F in repairs SS floor drain having dia of 125mm in circular shape SS 304 Grade glossy finish with or without hole for waste pipe complete all as specified and as directed . |
| 68 | S & F in repairs PVC Waste pipe / outlet connector pipe 32mm dia / 40mm and length 1150mm and corrugated profile for fixing in WHB / Sink complete all as specified and as directed . |
| 69 | S & F of 25 mm bore ball brass valves,high pressure,with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 70 | S & F in repairs 25 mm bore dia gun-metal,globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed . |
| 71 | Dismantling water tanks and removing to store Exc 500 litre & n exc 1000 litre amd Supply and fixing of 1000 litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed . |
| 72 | Taking down of chowkhats / frames n exc 1.50 sqm each without taking off shutter each complete all as specified and as directed . |
| 73 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and as directed . |
| 74 | Supply & fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top andbottom rails and 19 x 19mm for stiles, MS framecovered with 5mm thick single piece extruded PVC profile \"C\" channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer\"s instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed. |
| 75 | S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and as directed . |
| 76 | S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed . |
| 77 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C\"-22 complete all as specified and as directed . |
| 78 | S & F of Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 79 | S & F of small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and as directed . |
| 80 | M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc complete all as specified and as directed . |
| 81 | Material and labour for preparation of wood and wood based materials,new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and as directed . |
| 82 | Material and labour for preparation of wood and wood based materials,new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and as directed . |
| 83 | S & F of 35 mm thick 2nd class hard wood Glazed and skeletonshutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed . |
| 84 | S & F of factorymade 35mm thick 2nd class hardwood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 85 | S & F of30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and as directed . |
| 86 | S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and as directed . |
| 87 | S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed . |
| 88 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C\"-22 complete all as specified and as directed . |
| 89 | S & F of300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed . |
| 90 | S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steelwire staples complete all as specified and as directed . |
| 91 | S & F of floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and as directed . |
| 92 | M & L for preparation of new wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scaffoldings of any hieght complete all as specified and as directed . |
| 93 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and as directed . |
| 94 | M & L for granite (of any colour)20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grindingand polishing as in kitchen platform, counter for wash basin, flooringand all other similar works and 15mm thick screed bed mortar in CM 1:4 complete all as specified and as directed . |
| 95 | Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed. |
| 96 | Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulatedFRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision ofone 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly,including steelbox of required module for fixing of switches/sockets and regulators all as specified and directedfor following : (a) one light point controlled by one switch.Note: Cost of Modular box, frame, cover plates and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring. |
| 97 | One ceiling fan point controlled by one switch and regulator |
| 98 | One Exhaust fan point controlled by one switch. |
| 99 | One bell / buzzer point controlled by one bell push |
| 100 | One switch socket outlet 3 pin 5 Amps on same board along with other switches |
| 101 | One switch socket outlet 3 pin 5 Amps on independent board. |
| 102 | All as per item No 96.00 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulatedsingle coremultistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed. |
| 103 | S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified and directed. |
| 104 | S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified and directed. |
| 105 | S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified and directed. |
| 106 | S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified and directed. |
| 107 | S&F electronic fan regulator, flush type phenolic laminated sheet etc; all as specified and directed. |
| 108 | Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 109 | S&F MCB DB SPN 8 way, doubledoor, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCBdouble pole as incomer andSP MCBs as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incomingand Outgoing MCB measured separately relevant items. |
| 110 | S&F Load line MCB DB TP&N 4 way, vertical, doubledoor, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 32 amps as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevant items. |
| 111 | S&F MCCBs100 Amps 415V,16KA, 4 Pole complete all as specifiedand directed. |
| 112 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 113 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and Neutral current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 114 | Supply and fix Suspended/pendant type LED tube light fitting 40 Watt for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories,suitable for operation on AC, single phase 220 / 230 Volts, 50 Hz supply with suspension arrangement of 1.5 mtr (02 Nos) parallel for fixing of ftg, including taking down old fittings complete all as specified and directed. |
| 115 | S&F Surface and wall mounted LED tube light fitting, 20 W, batten type,PC housing provided for efficient heat dissipation with polycarbonate diffuser andintegrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220/230 Volts,50 Hz supply, and including connecting up with PVC sheathed suitable copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. |
| 116 | S&F LED building security light fitting 45 W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wireincluding provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed. |
| 117 | Taking down carefully Power / Sub main wirings with PVC aluminum conductor cables in PVC/STEEL conduits / TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken ascredit ,making good thedisturbed surfaces all as specifiedand as directed. |
| 118 | Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmmconforming to IS-694, drawn through and includingsuitable dia rigid PVCconduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistrandedcopper conductorcable (green) asearth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting tocommon earth dolly complete all as specified and as directed. |
| 119 | Taking down unserviceable Exhaust fan sealing cable end, dismantling blades and removing fan and deposit blades to store complete all as specified and as directed. |
| 120 | Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep, 900 RPM with louver complete all as specified and directed. |
| 121 | M&L for making hole for fixing of exhaust fan size 300mm with necessary civil works alterations in existing ventilation window of iron/aluminium frame for fixing of fan as per site requirement complete and made good with the existing wall complete all as specified and directed. |
| 122 | M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chase or buried in ground or drawn in conduit or any other suitable situation for loop earthing etc. as required 4mm dia galvanised steel wire all as specified and as directed. |
| 123 | Earthing complete with galvanised iron earth plate electrode 600mm X600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directlyin ground vertically to a depth not lessthan2.25 metres below ground level with top edge of the earth plateat a depth not less than1.5 metres belowgroundlevel, connectedto earth leadasdescribedhere-in-beforebymeansofbolts,nuts, washers and checknuts made out ofgalvanised iron or mild steel, earthingleadprotectedby asdescribedhere-in-beforeand connected to main switch board or main control board or electric poleall asshownonelectricalplate No.3of MES Sch Part-Iincluding necessaryearth work and excavation in any type ofsoil,plain cementconcrete1:3:6,typeC1 chamber,reinforcedcement concretecover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm diaTMT barsat140mmcentreto centrebothways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugsincluding testing complete all as specified and as directed. |
| 124 | PART II - PROVISION OF ANTI-SUICIDE RODS FOR CEILING FANS IN LIVING ACCOMMODATION |
| 125 | Taking down existing ceiling fan of 1200/1400 mm sweep along with all accessories carefully, and hanging back the same after servicing or replacement, including supply and fixing of anti-suicide down rod of size 12 inches fabricated from spring-type electrical wire duly twisted and soldered at the joints using heat-shrinkable sleeve, complete with connection from ceiling point or connector to fan using suitable insulated copper conductor cable, all as specified and directed |
