|
| 1 | Supply of high intensity, long range- 1KM, multi functional, auto rotatable, 360 degree LED search light, 1x300 watt, narrow beam- 5 degree, LM6 housing with heat sink, round in shape, dia 430mm, operating voltage 90V- 300V AC 50hz, PF >0.95, THD <20%, CCT: 5500K-6000K, CRI >70, Optics used- PMMA/PC lens, LED efficacy >140 l/w, average lux level at 10meter >10,000 with circle of approx 1meter, toughened clear glass with silicaon gasket, driver efficiency >95%, over volt / under volt & short circuit protected, confirming to LM79, LM80, IK07, IP66, Lux level report & BIS. The search light will easy to installed on a unique rotating stang having such designed that the light could be auto rotate 360 degree continuously (overnight) in the horizontal alongwith vertical tilting by motor upto 45 degree & covered by weather proof die cast fiber box with provision of 4 nos. foundation hole for installation. A wall-mounted wired control panel (consist of MCB, V-meter, fuse, LED indicator and having buttons for speed controller (1-10 rpm), auto/ manual, rev./forw and up/down buttons) is supplied for safe operation. Model No.: MRSL-LRFLL-25PC30 , Make: KALIN Note :- All auto revolving search light to be covered with inclined SS canopy of size that covers the light fully with shed being 15inches above top of light (price deemed to be considered in quoted price) |
| 2 | Supply and fix High performance 200W LED floodlight luminaire with pressure die-cast housing, toughened glass and secondary lens optics with IP66 ingress protection. E cacy 140 lm/W. (Make havells PRAZE F 280L WH NB-A5 TG SD) |
| 3 | Same as para above but for 150W (Make Havells PRAZE F 210L WH NB-A5 TG SD) |
| 4 | Supply and installation of Hot dip galavanised iron pole 7 mtr long sheet thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 200x200x12 mm, long weatherproof reinforced door opening with junction box mounting arrangement but including of junction box with 4 Nos aluminium Bus bar and including 1.0 M long double arm bracket wich required as per site 180 degree angle or 60 degree angle made of 40NB B class pipe having top 70 mm, 20 dia threaded made to J shape M20x600mm long steel grade EN8 grade foundation bolts- 4 nos with nuts, templates and all complete as per approved drawing (with internal accessorises like connectors, one run of FRLS PVC insulated cable 1100 V grade with multistranded copper conductor of size 1.5 Sqmm3 core conductor as per required and mcb) . Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed by Engineer-in-Charge for mounting of flood light Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1500 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing(Including form work). This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mmdia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, PCC, RCC,Form work,welding and reinforcement shall be deemed to be included in quoted rates.Make:Bajaj,Valmont,Wipro |
| 5 | M&L for sub main wiring drawing through PVC conduit with Wiring alongwith earth wiresize2x2.5 sq. mm +1 x2.5 sq. mm earth wire earth wireof FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required .Note:-Two run of 2.5 sqmm wire and Onerun of 2.5 sqmm wire and One run of stove enamelled steel conduit will be measured as one running meter. |
| 6 | S&F MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surfaceall as specified and directed by Engineer-in-Charge Make:Havells QVE series or equivlent legerend/standard/indoasian |
| 7 | S&F in repairs MCB SP 5 To 32 AMP,single pole 240 Volts 10KA \"\"C\"\"&\"\"B\"\" curve , as per site requirment,Complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply and installationin replacement, Translucent conical poles7 mtr long.weatherproofsocked proof reinforced door opening with junction box mounting arrangement including junction box with 4 Nos aluminium Bus bar and including 1.0 M long single arm bracket and foundation bolts- 4 nos with nuts, templates and all complete as per approved drawing (with internal accessorises like connectors, one run of FRLS PVC insulated cable 1100 V grade with multistranded copper conductor of size 1.5 Sqmm3 core conductor as per required and mcb) . including taking down old rusted steel/PCCpole of any size by digging & cutting with foundation or shiftting and reinstallation at other place as per direction of Engr-in -charge .And foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1500 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing(Including form work). This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mmdia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, PCC, RCC,Form work and reinforcement shall be deemed to be included in quoted rates. Pole to be fixed on top of 10MMthick MS Plate suitable to new pole foundation and Old foundation,making drill holes as required Note: 1 Rate of shifting existing pole to other location and reinstallation charge including excavation,foundation ,nutbolts foundation plate to install existing pole in new location is demeed to be includedin the quoted rates.Make:Bajaj,Helipole,Voltmount |
| 9 | Supply & fix in replacement of LED street light of 72 watt along with fixture making necessory arrangement for fixing existing bracket by means of prority necessory size pipe,welding,reveting,screw complete for fixing street light. Make:Bajajequivalent to Shakti/havells/Wipro complete all as specified and directed by Engineer-in-Charge Note: If Street light not fixed on existing/Newpole arms pipe,it will fix on additional pipe conecting by welding work which rate demmed including this quated rate |
| 10 | Cutting and filling bituminus roadas per direction of Engr in Charge for laying of UG cable and match the existing road to the existing system. |
| 11 | M & L for GI pipe/ tubes light grade of size 50 mm dia for UG cable protection with all fittings laid in trenches, on poles to crossing the roads/Nalah etc . |
| 12 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE,armoured, Aluminium conductor cable of size upto 50 sqmm,Indoor/Outdoor type complete all as specified and as directed by Engineer-in-Charge. The cable fault location digghing,removing, and after cable jointkitfixingreturning rate shall be deemed to be included in quoted rates.Make: M-seal,denson. |
| 13 | Supply, laying and testingin replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as directed by Engineer-in-Charge |
| 14 | All as per Item No 13 here-in-before but of size 16 sq mm ,4 core. |
| 15 | All as per Item No 13 here-in-before but of size 25 sq mm ,4 core. |
| 16 | All as per Item No 13 here-in-before but of size 35 sq mm ,31/2 core. |
| 17 | All as per Item No 13 here-in-before but of size 50 sq mm 3,1/2 core. |
| 18 | M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.’25 mtr below normal ground level) with top edge of the plate not less 1.5 mtr below normal ground level connected to galvanized earth plate with 4.0 mm thick GI wire by means of suitable size of GI nuts, bolts, check nuts and washers all as specified in electrical plate SSR Part I including necessary .Exc & earth work, providing charcoal and salt dust layers and construction of PCC pit in 1:3:6 using 20 mm size graded stone aggregate, precast RCC 40 mm thick cover in 1:2:4 type B 1 with 12 mm dia steel MS plain bar, lifting handle GI pipe of 50 mm bore for earth lead protection andGI pipe 15 mm dia forwatering, with funnel and wire mesh including testing on completion. All as specified and as directed by Engineer-in-Charge incl dismentling existing unsserviciable earthing . |
| 19 | S & F earth continuity conductor or main earthing led fixed on wall or on resess or drawn in conduir 4 mm dia GI wire |
| 20 | Excavatioin in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/loose soil for laying of cable /erection of pole/stay pit excavation |
| 21 | All as per Item No 20 here-in-before but in hard/dence soil |
| 22 | M&L for Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm |
| 23 | M&L for Removing excavated material not exceeding 50 m and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point |
| 24 | M&L for crushed stone sand for cable cushoining laid in trenches for protection of cable |
| 25 | Supply and laying factory cast, unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches as specified and as directed by Engineer-in-Charge. |
| 26 | M&L for Marking of any size pole , Scrubing of existing rusted/unread surface of poles and prepration surfacesfor marking, Marking done by two colour. numbers marking done by white colour and back side colour and shapeas per direction of Engr in Charge . |
| 27 | Supplying and fixing HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 300 x 200x 100 mm with 32 Amp 4way heavy duty terminal block with 6 Amp MCB SP and two number of canle entru gland (stainless steel )of standard size with suitable size clamp to fix with pole incudinmg taking old u/s complete all as directed by Engineer-in-Charge Make Sintex of equivalent |
| 28 | Supply and fixing amp rating MCB SPN 32 Amp 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
