Name of Work: Supply and Fixing of Furniture Work for Laboratory at NFSU Dharwad Campus, Karnataka
Sl. No.
Item Description
1
Supply and Fixing of Furniture Work for Laboratory at NFSU Dharwad Campus
2
C-FRAME M-ISLAND (CRCA) - 4560 mm (L) X 1260 mm (W) X 900 mm (H) • Worktop Material: The worktop should be 18mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. JET BLACK GRANITE (62 sq ft) • Assembly of Construction for Work Bench: C frame systems are the modern lab furniture architecture. Based on a cantilevered design, C-frame systems do not need legs for support. C-Frames assemblies are manufactured from standard hollow metal sections, confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components are of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units are supported on heavy-duty steel frames fully carrying the load of worktops. C-frame are constructed from a rectangular pipe with a cross section of 60mm x 30 /40 mm and 1.6/2 mm thick, are without a vertical front leg to give a clean look. The C-frame legs are supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The structure has removable back panel (wherever required as per design finalization) to provide access for maintenance throughout the length of table. The structure shall be duly treated for the rust prevention and coated with epoxy powder coated (with minimum thickness of 60 micron). The horizontal frames connecting the C’ Frames and other required frames shall be of the similar specifications. Together with the C-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. • Material of Construction for Work Bench: 18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish. (50-70Microns) • Storage - 600 mm wide one Drawer two shutter with one shelf storage, 2 no wheel lockable + 2 no wheel non lockable (Qty - 6) • Structure - 60 MM X 30 MM X 1.6 MM MS PIPE (Qty - 5) • Filler Panel - REMOVABLE PANEL 600mm TO 900 mm (Qty - 12) - Filler Panel (Qty - 2) • Reagent Rack - Double side double tire reagent rack - (Qty - 3) • Electrical Module - 3M Plate with 16/6 Amp Socket and 16 Amp MCB or switch (Make: Havells/Anchor / Norysis/Equivalent) (Qty - 12)
3
PLINTH M-WALL (CRCA) - 1400 mm (L) X 750 mm (W) X 900 mm (H)• Worktop Material: The worktop should be 18mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. JET BLACK GRANITE (11 sq ft) • Material of Construction for Work Bench: 18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish. (50-70Microns) • Storage - 600 mm wide two shutter under sink (Qty - 2) • Filler Panel - Filler Panel (Qty - 2) • Sink & Tap - Polypropylene SINK 560X355(Qty - 2) - Three-way swan neck cpve & brass faucet (Qty - 2)
4
D-FRAME M-WALL (CRCA) - 1200 mm (L) X 750 mm (W) X 900 mm (H) • Worktop Material:The worktop should be 18mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. JET BLACK GRANITE (11 sq ft)• Assembly of Construction for Work Bench: D Frame assembly from standard hollow section conforming to IS 7138/60 mm < 30mm * 2 mm thick with crca sheet of 16 gauge. All D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. D-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. This shall 1 provide more knee space or leg space and would facilitate uninterrupted lateral movement of the under-bench units within the bench run. The D-frame legs should be supplied with adjustable feet (tolerance from -5mm o + 20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. The structure should have a removable back panel to provide access for maintenance throughout the length of table. The D-frame shall also have skirting at back bottom side. Finish on metal surface: Epoxy polyester powder coating with dry film thickness of 40-60 microns. Interior & Exterior will be provided with powder-coated finish. Under Bench Cupboards will be provided with Top Drawer and Bottom one Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make: Godrej/Ebco/Hettich) • Material of Construction for Work Bench: 18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish. (50-70Microns) Storage Dimension - 450mm W ^ * 520 mm D• Structure - 60 MM X 30 MM X 2 MM MS PIPE • Filler Panel - REMOVABLE PANEL 600mm TO 900 mm.Filler Panel • Electrical Socket - 200 x 120 mm single electrical raceway with electric point (Qty - 2) • Electrical Module - 3M Plate with 16/6 Amp Socket and 16 Amp MCB or switch (Make: Havells/Anchor / Norysis/Equivalent) (Qty - 2)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
