Name of Work:- Forrh; Okz 2025&26 Ds Vurxzr Csoj Eksvk Lqyrkuiqj Ekxz Fdeh0 04 Ls Uxyk Uxfj;K Ekxz Ij Lkeku; Ejeer Ds Lkfk Uohuhdj.K Dk Dk;Za
Sl. No.
Item Description
1
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. Including All Material T&P etc and also Including All Taxes But Excluding GST.
2
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Including All Material T&P etc and also Including All Taxes But Excluding GST.
3
Providing and applying tack coat with Bitumen (VG-10) using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared surfaces & cleaned with Hydraulic broom as per Technical Specification Clause 503.Including All Material T&P etc and also Including All Taxes But Excluding GST.
4
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508.Including All Material T&P etc and also Including All Taxes But Excluding GST.
5
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. Including All Material T&P etc and also Including All Taxes But Excluding GST. 1- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 1609.00 per Hour including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 12872.00 per day shall be made from contractor’s bill for idle period. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
