|
| 1 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 2 | M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 3 | M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 4 | M&L for preparing of oldsurfaces of wall and applying one coat of distemper oil emulsion by using roller complete all as specified and directed. |
| 5 | M&L for preparing of old surfaces of walls and applying two coats of distemper oil emulsion by using roller etc complete all as specified and directed. |
| 6 | M&L for preparation ofwashing ,rubbing down and scrapping of plastic emulsion paint of old decorated wall surfaces etc and applying one coat of plastic emulsion paint by using roller etc complete all as specified and directed. |
| 7 | M&L for preparation ofwashing ,rubbing down and scrapping of plastic emulsion paintby using roller of old decorated wall surfacesovertwo coats of plastic emulsion paint complete all as specified and directed. |
| 8 | M&L for Preparation of old or new surfaces of wall and applying 3mm thick wall care putty as per direction by Engr-in-charge. Note : Putty will be done in two layer each layer thickness will be 1.5 mm. Quated rate included rubbing, grinding until surface become even and smooth and till satisfaction of Engr-in-charge. . |
| 9 | M&L for preparation of washing, rubbing down and scrapping of old surfaces of wall and applying one coat of acrylic emulsion (weather coat) paint using roller brush etc complete all as specified and directed by Engr in Charge. |
| 10 | M&L for preparation of washing, rubbing down and scrapping of old surfaces of wall and applying two coats of acrylic emulsion(weather coat) paint using roller brush etc complete all as specified and directed by Engr in Charge. |
| 11 | M&L for preparation of old decorated wooden surfacesof any description, not otherwise described, over 10cm width or girth andapplying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of old decorated steel surfaces of any description , over 10 cm in width or girthandapplying one coat of synthetic enamel paintcomplete all as specified. |
| 13 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls/ ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed. |
| 14 | M & L for 10 mm thick renderingin CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L for preparation of plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer complete all as specified & directed. |
| 16 | M&L for 10 mm thick cement plaster in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surface andapplying three coat of white wash on ceiling surfaces complete all as specified and as directed. |
| 18 | M&L for 5mm thick rendering in cement mortar (1:4) (as second coat), over and including 10mm thick rendering in cement mortar (1:6) (as first coat) on fair faces of brick work or concrete surfaces of wall, including supply mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even and smooth without using extra cement complete all as specified and directed.Note :- Water proofing compund shall be measured and paid separately. |
| 19 | M & L forapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 20 | Supply only liquid water proofing compound complete all as specified and directed. |
| 21 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed. |
| 22 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 23 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed. |
| 24 | M&L for 25 mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregates) as in flooring in leveling course, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 25 | Demolition of cement concrete in roof, floor (other than ground floor) beam, staircase, landing chajjas and similar suspended works, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed. |
| 26 | M&L cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) as in copings roof, floor all as spefied and directed by Engr-in-charge. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removingrubbish off the premises complete all as specified and directed. |
| 28 | M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square/ rectangular) polished area of each tile and area not excedding 0.18 sqm as in skirting/ dado etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc.laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc.laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for light shade colour vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for light shade colour vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, area of each tiles exe 0.36 sqm butn. exc 3 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Demolition of stone slabsof anythickness & in any position laid, bedded and pointed in any mortar otherwise specified. |
| 34 | M&Lfor Graniteslab/ (lakha red) 18-20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, platform,shelves,cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 35 | M&Lfor tileslab of 12-18 mm thick as in steps, jambs, pillars, window cills, platform,shelves,cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with tile shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 36 | Labour only for moulding to granite stone/ tile slab in to bracket straight or circle to facing of squared granite of any description complete all as specified and as directed. |
| 37 | Taking down 15/20 mm dia of steel tubing /pvc pipes/upvc pipes and connections, complete all as specified and as directed by Engr-in-Charge. |
| 38 | M&L for 15mm dia of Unplasticised PVC pipes of pressures rating 10 kgf/cm2 fixed to walls, ceilings, or in floors including any fitting required for making joint (MT/FT, elbow etc) complete including taking down of existing pipe complete all as specified and as directed by Engr-in-Charge. |
| 39 | M&L for 20mm dia of Unplasticised PVC pipes of pressures rating 10 kgf/cm2 fixed to walls, ceilings, or in floors including any fitting required for making joint (MT/FT, elbow etc) complete including taking down of existing pipe complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F 40mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete including taking down of existing pipe all as specified and as directed. |
| 41 | S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and directed. |
| 42 | S&F75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 43 | S&F in repair PVC (SWR) plain bend 75 mm dia, of any radius with rubber ring joints, complete all as specified and as directed |
| 44 | S&F in repairPVC (SWR) plain bend 110 mm dia, of any radius with rubber ring joints, complete all as specified and as directed |
| 45 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement75mm bore dia of outlet of pipe complete all as specified and directed. |
| 47 | S&F repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 48 | S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 49 | S&F in repair SS floor drain double trap with collar for firm grip, rotating lock drain jali & cockroach trap for prevention of pests fixed with white or grey cement complete all as specified and directed. |
| 50 | S&F in repair SS Grating of size 150 mm x 150 mm / circular fixed with white or grey cement complete all as specified and directed. |
| 51 | S&F in repairPowder coated aluminium frame for Partition,doors, windows including sliding track, ventilators with one or more rebates including joining cleat for fixingand also standerd closing and opening systems for louvers glass etc. complete all as specified and directed by Engr- In-Charge. |
| 52 | Supply and fixedin repair powder coated Anodised aluminium door shutters and window, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etccomplete all as specified and directed by Engr- In-Charge. |
| 53 | S&F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 54 | S&F in repair Mortice lock,Dead lock, lever lock foralumunium body of aluminium, vertical type of size 100mm of 2 levers etc compete all as specified and as directed. |
| 55 | S&F in repair round lock heavy duty design for wooden/ aluminium door compete all as specified and as directed. |
| 56 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed. |
| 57 | M&L hard core of gauge not exceeding 63 mm deposited spread and levelled watered and well rammed to a true layers complete all as specified and directed. |
| 58 | M&L forPCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and directed. |
| 59 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed |
| 60 | M&L for 25 mm to 30 mm thick factory made cement concrete chequered tiles of square shape in approved color and design(size,color & designas per directed by Engr-in -charge) laid on 15 mm thick cement mortar 1:4 including curing , finishing all complete as per directed by Engr-in-charge. |
| 61 | M& L for Sand filling under floors or in foundations including watering and onsolidation complete all as specfied and directed |
| 62 | Takingdown chowkats or frame n. exc. 1.5 Sqm eachcomplete all as specified and directed. |
| 63 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed. |
| 64 | Taking down shutters of any description exc. 2 Sqmeach complete all as specified and directed. |
| 65 | Taking down chowkats or frames with shutterssize Chowkhats or frames not exc. 1.5 sq. m each Sqm each complete all as specified and directed. |
| 66 | Taking down chowkats or frames with shutterssize exc 1.5 Sqm and n. exc. 4.00 Sqm each complete all as specified and directed. |
| 67 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105 x 60 mm |
| 68 | S&FPressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 125 x 60 mm |
| 69 | S&F 35 mmin second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 70 | S & F repair 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 71 | S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 72 | M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) in 1:4 CM as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and directed. |
| 73 | S&F in repair brass, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or drawn brass bolts and fixed complete all as specified and directed. |
| 74 | S&F in repair 150mm size Extruded brass handles,fabricated type polished handles, cast type complete all as specified and directed. |
| 75 | S&F in repair 150 mm size brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section and fixed complete all as specified and directed.. |
| 76 | S&F in repair100 mm size brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section and fixed complete all as specified and directed. |
| 77 | S&F in repair100 mm size butt hinges, medium weight, cold rolled Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 78 | S&F in repair aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed. |
| 79 | S&F in repair 150mm size aluminium handles,fabricated type polished handles, cast type complete all as specified and directed. |
| 80 | S&F in repair 150 mm size Aluminium anodised, barrel tower bolts tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section and fixed complete all as specified and directed. |
| 81 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and directed. |
| 82 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw and bolts complete all as specified and directed. |
| 83 | S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 84 | S&F in repairs door closer aluminium (die cast) body hydraulically regulated designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 85 | S & F in repairs factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed. |
| 86 | S & F in repairs 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm andstainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge. supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II complete all as specified and directed. |
| 87 | S&F in repairs telescopic Channels of length 558mm to 690mm for kitchen drawers or cabinets complete all as specified and directed. |
| 88 | S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE office) of size 450 mm x 500 mm x 150 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position complete all as specified and directed. |
| 89 | S & F in repairs mirror of area n exc 2 sqm bevelled edge over table top/under counter washbasin of selected quality and glass monuted 6mm thick edge cut and fixed to wall with nylone sleeve cadmium plated screw complete all as specified and directed. |
| 90 | S&F in repairs 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 91 | S&F in repairs PVC cabinet with mirror of size 450mm x 600mm complete all as specified and as directed by Engineer-in-Charge. |
| 92 | S&F in repair wall mounted LED illuminated mirror of comprising 4- 6 mm thick high quality moisture resistant mirror with polished edges. The mirror shall be provided with in built energy efficient LED strip lighting Cool light, warm light and neutral white as specified with uniform diffused illumination complete all as specified and directed by Engr-in-charge. |
| 93 | S & F in repairs auto hinges (zero degree or eight degree) for kitchen cabinets complete all as specified and directed. |
| 94 | S&F in repairs vertical blind/ ruler blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction havingroller , threads / Chain & pully system (clutching mechanism)etc complete Sample /Design approved as per GE . including taking down old vertical blind complete as specified and directed by Engr-in-Charge. |
| 95 | S&Fin repairs manually operated zebra blindsfor flexiblelight control and privacy having opaque strips aligned to block light with alternate horizontal strips of sheer and opaque fabric or polyester of size as per requirement width & drop, having hardware top tube made of extruded aluminium with spline adoptable to accommodate clutchmoulded plastic having self lubrication with glass fibre reinforcement having a minimum lifting capacity head adoptability operating chain plastic/steel ball chain adoptable to the clutch pitch for smooth operation of blinds locking member plastic /steel stop locks for limit setting adoptable to be steel chain bonding withwide double sided adhesive tape of reqd length for strong holding capacity spring booster provided as per the requirement bottom bar aluminium extruded circular section with powder coated finish ,for a perfect fall to fabric to avoid warpage /floating ends are covered with ends cap to give a perfect finish complete all as specified and directed. |
| 96 | S&F in repair25 mm dia stainless steelroddrapery rod cut to size and fixed in position, including all fitting complete all as directed. |
| 97 | S&F in repairs stainless steel double bracket for curtain rod for door and windows complete all as specified and directed by Engr In Charge |
| 98 | S & F in repairs Stainless steel Peg set of set of four/six (cloth hanger) complete all as specified and directed. |
| 99 | S&F in repairs brass mortice lock fixed complete in wooden/steel/ any door complete all as specified and directed by Engr in Charge. Make: Godrej or equivalent as directed by GE |
| 100 | S& F in repairs Door seal aluminium plate with nylon brush ivory matt having width 6cm colour ivory, matt finishing, material metal with brush incl screw for fixing n exc 1.2m etc complete all as specified and directed. |
| 101 | S&F in repair rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified as directed including taking down of exixting tank . |
| 102 | S&Fin repair rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified as directed including taking down of exixting tank. |
| 103 | S&F in repairs CP overhead rain shower ABS type square/circular complete with all fittings complete all as specified and directed. |
| 104 | S&F in repairs maze head overhead rain shower square/circular with shower arm complete with all fittings complete all as specified and directed. Make : Jaquar Ccat No. OHS-CHR-1639 or equivalent |
| 105 | S&F in repairs CP (bidet sray) Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. Make :Jaquar or equivalent |
| 106 | S&F in repair Hand shower with 8mm dia 1.5 metre longeasy flex tube incl wall bracket hand shower and in chorme finish & wall hookall as specified and as directed.Make : Jaquar CAT No. HSH1715 or equivalent |
| 107 | S&Fin repairs 32mm PVC waste pipe for wash hand basin/urinal/sink 600mm long complete all as specified and directed. |
| 108 | S&F in repairs 15mm bore bib tap fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed. |
| 109 | S&F in repairs 15mm bore 2 waybib tap fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed. |
| 110 | S&F in repairs 15mm bore stop valve, fancy type, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified and directed. |
| 111 | M&L in repair15 mm bore Angular stop cock with wall flange approved by GEcomplete all as specified and directed. Make : JaquarCat No -VGP 81053 or equivalent |
| 112 | S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down highpressure, with orwithout lettered \"Hot\" or \"Cold\" withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed. |
| 113 | S&F in repairs Pillar taps with swan neck with central hole basin mixer with round spout with Popup waste system with 450 mm long braided hoses with capstan heads, chromium platedscrewed down highpressure, with or without lettered \"Hot\" or \"Cold\" withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed. Make Jaquar:-FLR-5169NB or equivalent |
| 114 | S&F in repairs 15 mm size Long body pillar tap water screwed down for iron pipe and fixed cast copper alloy chromium plated with capstan head with all connected accessories fixed complete all as specified and directed. Make: Jaquar ALI-CHR-85021 or equivalent as approved by GE |
| 115 | S&F in repairs 15 mm size swan neck pillar tap water screwed down for iron pipe and fixed cast copper alloy chromium plated with capstan head with all connected accessories fixed complete all as specified and directed. Make CERAF2008251 or equivalent |
| 116 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 117 | S&F in repairs 15 mm size sink mixer for mixing hot & cold water screwed down for iron pipe and fixed cast copper alloy chromium plated with capstan head with all connected accessories fixed complete all as specified and directed.Make: Jaquar VGP-81005NB or equivalent as approved by GE |
| 118 | S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such asCP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and directed. |
| 119 | S & F in repairs cup board will be in 2 part outer area not exe 15 sqm made up with 18 / 19 mm thick plywood and laminates both side with sunmica including inside lightsand front side door of cub board made up with sliding profile shutter including frame(2 No. of shutter in each compartment) having frosted toughned glass including all fittings all as directed by Engr-in-charge.Note : 1. Quated rate will be included taking down of existing cub board2. Cup board having two compartment lower and upper part.3. Profile shutter will be provided bottom and top of the cub board with sliding door having toughned glass.4. Number of lights in the cub board will be as per directed of Engr-in-charge.5. rate for all items needed for fixing cup board and profile shutter including frosted toughned glass will be included in quated rate. |
| 120 | S&F in repair Toughned glass of thickness exe. 4 sqm but n.exe 8 mm as in hinged doors, partitions, automatic doors, sliding door and similar work including cutting to shape, drilling holes required and aluminium section/ machine requiredfor moving toughned glass .Note : Rate will be included for allthe fitting or any aluminum section required fortoughned glass for moving/ sliding or opening in quatated rate. |
| 121 | S&F in repair Toughned glass of thickness exe. 9 mm but n.exe 12 mm as in hinged doors, partitions, automatic doors, sliding door and similar work including cutting to shape, drilling holes required and aluminium section/ machine requiredfor moving toughned glass .Note : Rate will be included for allthe fitting or any aluminum section required fortoughned glass for moving/ sliding or opening in quatated rate. |
| 122 | S&F in repair vitreous china counter top wash hand basin of size 500 mm x 435 mm x 180mm including all necessary fitting such asCP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfacescomplete all as specified and directed. Make : Jaguar Cat No. KUS-WHT-35601 or equivalent |
| 123 | S&F in repair vitreous china counter top wash hand basin of size 705 mm x 460 mm x 195mm including all necessary fitting such asCP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfacescomplete all as specified and directed. Make : Jaguar Cat No. KUS-WHT-85601 or equivalent |
| 124 | S & F in repairs one piece EWCwith duroplast slim soft close seat cover with hinges and accessories set of size Camper640 x 360 x 765 mm s trap-220 mm complete all as specified and directed. Make: Cera Cat No.S1013206 or equivalent Note : Rate of Flushing cistern and other items used for fixing of EWC will be included in Quated rate. |
| 125 | S & F in repairs one piece EWCwith UF soft close seat cover with hinges and accessories set of size 370 x 670 x 720 mm s trap-220 mm complete all as specified and directed. Make: Jaquar Cat No. LYS-WHT-38851S220UFSMSNR or equivalent Note : Rate of Flushing cistern and other items used for fixing of EWC will be included in Quated rate. |
| 126 | S & F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed. |
| 127 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed. |
| 128 | S & F in repairs rimless wall hung EWC with UF soft close seat cover with hinges and accessories set of size 390 x 570 x 365 mm complete all as specified and directed. Make: Jaquar Cat No: VGS WHT 81953 UF or equivalent |
| 129 | Supply and fix in repairs single piece concealed cistern body (front or top actuation) with floor mounting frame, installation kit and p type drain pipe connection set for wall hung WC , fixed in position and connecting complete all as specified and directed.Make: Jaquar Cat No:JCS-WHT-2431FP or equivalent |
| 130 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, fixed in position and connecting complete all as specified and directed. |
| 131 | S&F in repairs plastic sheet covers of white colour for water closet, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat No:VGS WHT 81953 UF or equivalent |
| 132 | S&F in repairs plastic sheet covers of any colour for water closet, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. |
| 133 | S&F in repairs Toilet paper holderall as specified and directed as directed by Engineer-in -charge. Make Jaquar ACN-1151N or equivalent |
| 134 | S&F in repairs Tubular towel ring with round flange as directed by Engineer-in -charge. Make: Jaquar ACN-1121 N or equivalent as approved by GE |
| 135 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges as directed by Engineer-in - charge. |
| 136 | S&F in repair wall mounted Tubular towel rack, 20mm dia, D type, 60cm long between flanges chrome finish complete all as specified and directed.Make : Jaquar CAT No. AKP 35781PS or equivalent |
| 137 | S&Fin repair wall mounted Tumbler holder chrome finish complete all as specified and directed by Engr-in-Charge.Make : Jaquar CAT No.ACN 1141N or equivalent |
| 138 | S&F in repair wall mounted Soap dish holder complete all as specified and directed.Make : Jaquar CAT No.ACN 1131N or equivalent |
| 139 | S&F in repair wall mounted Soap dispensor complete all as specified and directed.Make : Jaquar CAT No.ACN 1135N or equivalent |
| 140 | S&F in repairs Chromium plated corner glass shelf size 12 inch with bracket or ss rails as directed by Engineer-in -charge. |
| 141 | S&F in repairs Chromium plated corner glass shelf size 18 inch with bracket or ss rails as directed by Engineer-in -charge. |
| 142 | S&F in repairs Chromium plated square/rectangular glass shelf with SS rail size 24 inch long with bracket as directed by Engineer-in -charge. |
| 143 | S&f in repair Shower panels curve neo of size 1500 x 230 mm having inbuilt ABS top shower with 60 nozzle and hand shower, 4 moveable ABS body massage jets, thermostatic with diverter and minimum water pressure required 2 bar all as specified and directed by Engr-in-charge. Make : Jaquar cat No. SHP-WHT-TMCURVENEO or equivalent |
| 144 | S&F in repair stainless steel kitchen plate rack of size 31\" x 36\" x 10\" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed. |
| 145 | S&F in repair stainless steel sink with drainage kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed. Make : Nirali, Silver Shine (blue star), Prayag or equivalent |
| 146 | S & F in repairs 18/19mm thick acrylic PVC celuka ply board as in kitchen shutters and cupboards both side laminated waterproof complete all as specified and directed. |
| 147 | S&F in repairs 18 mm thick Prelaminated particle board, exterior grade, prelaminated one sides with decorative choice laminations fixed with screws complete all as specified and directed. |
| 148 | S&F in repairs 12 mm thick Prelaminated particle board, exterior grade, prelaminated one sides with decorative choice laminations fixed with screws complete all as specified and directed. |
| 149 | S & F in repairs 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, typeBB fixed with screwsto timber frame work or ply wood including 3 mm thick teak wood lapping on edge including taking down old plywood complete all as specified and directed. |
| 150 | S & F in repairs 12 mm thick plywood (07 Nos of ply) grade BWR, typeBB fixed with screwsto timber frame work or ply wood including 3 mm thick teak wood lapping on edge including taking down old plywood complete all as specified and directed. |
| 151 | M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 152 | S & F in repairs 75 mm size Stainless steel butt hinges medium weight, fixed to chowkhats all as specified and as directed by Engineer-In-Charge. |
| 153 | S & F in repairs 100 mm size stainless steel handle complete all as specified and directed. |
| 154 | S & F in repairs 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed. |
| 155 | S & F in repairs decorative knobs,handles for cupboard ,shelvesfabricated type polished handles, knobs complete all as specified and directed. |
| 156 | S&F in repairs 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing/ taking down old beads complete all as specified and directed. |
| 157 | M&L for preparation offloor/ paver/ path/chequered tile surfaces and applying a coat of glossy finishexterior emulsion paint of floor to match with existing colour or any other selected colour by usinghand roller etc complete all as specified and as directed by Engr-in-Charge.Make : Indigo floor paint or equivalent |
| 158 | M&L for ATT along the external/ internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 159 | Repairs & maintenance of slim Concealed flushing cisternetc by replacement of internal installation kit& assembly and making it functional complete all as specified and directed. Make / Code:- (Jaguar) CIB WHT-31801011 XW or equivalent with wall mounting frame complete. |
| 160 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 161 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade-165 complete all as specified and directed. . |
| 162 | S&F steel work in tubular trusses, purlinsincluding special shaped washer etc complete using ERW or induction butt weldedsuare or round tubes conforming to IS 1161-1979 grade St- 240 complete all as specified and directed . |
| 163 | M&L two coats of synthetic enamel paints on steel Surfaces exc 10cm girth over a coat of red oxidecomplete all as specified and directed. |
| 164 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 165 | M&Lfor Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 166 | S&F2 mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified & as directed. |
| 167 | S & Fin repair for Aluminium composite panel ( ACP) sheet 3 m thick of selected quality fixed to wooden or particle or plywood or concrete surface or brick surface including aluminium frame with necessary cleaning of surface and making surface even and smooth complete all as specified and directed |
| 168 | S&F in repair Solar control film 50 micron reflective type sticked to glass panes/frosted/tinted as per sample kept in GE office & as per instructions of manufacturers ascomplete all as specified and directed . |
| 169 | S/F for Gypsum board of false ceiling of12.5 thick Gypsum board of the suspension shall consit 6mm dia GI steel rod suspended from ceiling supporting aluminium grid of 38x25x1.5mm and cross tie of 25x25x1.5mm and aluminium angle 25x25x1.5mm including providing and fixing anchors for hanging the false ceiling from the slab making cutouts in the false ceiling for recessed light fittings AC duct grills etc and filling and finishing the joints including providing and fixingplaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire meshproviding incltwo coats of OBD over 3 mm putty and complete all as specified including dismentling of exixting boardas directed by Engineer-in-Charge |
