|
| 1 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 2 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including casing capping 20mmISI marked ivory colour with allfittings/fixing accessories and terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover/ PVC gang boxfor mounting sheet cover for mounting switches, sockets, fan regulators etc for One light point /fan point/bell point controlled by one switch complete all as specified and directed. |
| 3 | All as per item No 02 above but socket outlet 6 Amps controlled by one switch on independent board complete all as specified and directed.. |
| 4 | All as per item No 02 above but for socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and directed. |
| 5 | All as per item No. 02 above but but wire2.5 sqmm size alongwith one earth continuity conductor 1.5sqmm size complete all as specified and directed. |
| 6 | M&L for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC concealed including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly suitable for modular sunken box with inner and outer cover for 01 module to 08 module One light point or one fan point controlled by one switch as required at site complete all as specified and directed below :-Note:-(1) Rate forCutting, chieseling and making good the existingsurface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge. (2) Rate for Modular sunkan boxes, inner and outer cover measured and paid separately. |
| 7 | All as per item No 06 before but socket outlet 6 Amps controlled by one switch on independent board complete all as specified and directed. |
| 8 | All as per item No 06 before but for socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and directed. |
| 9 | All as per item No. 06 before but wire2.5 sqmm size alongwith one earth continuity conductor 1.5sqmm size complete all as specified and directed. |
| 10 | S&F Switch piano, flush type single pole, one way 5 Amp,230 V complete all as specified and directed. |
| 11 | S&F Socket outlet 2 in 1, 3 pin, 5 Amp,240 V complete all as specified and directed. |
| 12 | S&F Switch socket combination 2 in 1, 5 Amp flush type, 240 V complete all as specified and directed. |
| 13 | S&F Switch socket combination 5A/ 16A, 5 in 1 flush type, 240V complete all as specified and directed. |
| 14 | S&F Bell push, flush type, 5 Amp,230V complete all as specified and directed. |
| 15 | S&F Bell , AC, 230 Volts, single pole complete all as specified and directed. |
| 16 | S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed. |
| 17 | S&F stepped type ( five steps), 230 V electronic fan regulator flush type (Socket Type) complete all as specified and directed. |
| 18 | S&F modular Modular Switch 1 way 6 A, 1 module complete all as specified and directed. |
| 19 | S&F modular Switch 1 way 16 A, 1 module complete all as specified and directed. |
| 20 | S&F modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 21 | S&F modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 22 | S&F modular Regulator Step Type 120 watt, 2 module complete all as specified and directed. |
| 23 | S&F modular Modular Bell push 6A, 1 module complete all as specified and directed. |
| 24 | S&F modular metal flush box 1/2 module complete all as specified and directed. |
| 25 | S&F modular metal flush box 3 module complete all as specified and directed. |
| 26 | S&F modular metal flush box 4 module complete all as specified and directed. |
| 27 | S&F modular metal flush box 6 module complete all as specified and directed. |
| 28 | S&F modular metal flush box 8 module complete all as specified and directed. |
| 29 | S&F modular white cover plate with frame 1 module complete all as specified and directed. |
| 30 | S&F modular white cover plate with frame 3 module complete all as specified and directed. |
| 31 | S&F modular white cover plate with frame 4 module complete all as specified and directed. |
| 32 | S&F modular white cover plate with frame 6 module complete all as specified and directed. |
| 33 | S&F modular white cover plate with frame 8 module complete all as specified and directed. |
| 34 | S&F12 W surface mounted downlightwith white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mounted including taking down complete all as specified and directed. |
| 35 | S&F LED batten (1.2M) made of Aluminium housingwith a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 36 | S&F LED inverter type batten (1.2M) made of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 37 | S&F LED batten Essential SmartBright MW batten is an Intelligent Standalone solution with micro wave sensors for movement detection. With factory set dimming profiles of 50% and 100%, light dims to these levels in case occupacy is not detected.Type HSN(1.2M) made of PVC housing sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 38 | S&F12 W surface mounted downlightwith white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mounted including taking down complete all as specified and directed by Engr-in charge. Make:- Havells Cat NoEDGESURFACERDDLR12WLED840S or equivalent make of philips/Bajaj/wipro/crompton or equivalent make as specified in PS. |
| 39 | S&F 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 including all fixing arrangemengt including taking down complete all as specified and directed. |
| 40 | S&F 9/10Wsurface and wall mounted LED Batten and taking down complete all as specified and directed. |
| 41 | S&F15 W surface mounted downlight 1x1 feet with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency Aesthetically designed 1x1 feet LED Flat panel for surface mountingincluding taking down complete all as specified and directed. |
| 42 | S&FDecorative city light any type and S & F LED wall bracket light aesthetically designed with B22d & E27 lamp holder made up of Polycarbonate suitable for 9/10 W including suitable LED Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and directed. |
| 43 | S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for batten fitting including taking down complete all as specified and directed. |
| 44 | S&F LED Lamp 9 Wattcomplete all as specified and directed. |
| 45 | S&F PVC ractangular block for mounting MCB DB\"s with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep including taking down complete all as specified and directed. |
| 46 | S&F PVC ractangular block for mounting MCB DB\"s with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep including taking down complete all as specified and directed. |
| 47 | S&F PVC ractangular block for mounting MCB DB\"s with 3 mm thick plastic laminated sheet cover of size 100 x 100 x 50 mm deep including taking down complete all as specified and directed. |
| 48 | Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at anysituation and making good disturbed surface after taking down the submain complete all as specified and directed. |
| 49 | M&L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core FRLSH cablePVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through in & including PVC conduits/casing-caping of suitable size,fixed to wall/ceiling etc including6 sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, FRLSH copper conductoras earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and directed. (Note : PVC Conduits/Casing-caping, two run wiring cables and one run of earth wire will be measured as one length.) |
| 50 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSHPVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including PVC casing-caping complete all as directed (Note :- PVC casing-caping shall be included in quoted rate) |
| 51 | M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through PVC casing-caping complete all as directed.(Note :- PVC casing-caping shall be included in quoted rate) |
| 52 | All as per item No51 above but of size 4 Runs of 10 sqmm 1X10.0 sqmm as earthwirecomplete all as specifiedand directed. |
| 53 | All as per item No 51 above but of size4 Runs of 6 sqmm and1X6.0 sqmm as earthwirecompleteall as specified and directed. |
| 54 | S&F in repair Switch piano, flush type single pole, one way 5 Amp,230 V complete all as specified and directed. |
| 55 | S&F in repair Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed. |
| 56 | S&F in repair Switch socket combination 2 in 1, 5 Amp flush type, 240 V complete all as specified and directed. |
| 57 | S&F in repair Switch socket combination 5A/ 16A, 5 in 1flush type, 240 V complete all as specified and directed. |
| 58 | S&F in repair Bell push, flush type, 5 amp,230 V complete all as specified and directed. |
| 59 | S&F in repair Bell , AC, 230 Volts, single pole complete all as specified and directed. |
| 60 | S&F in repair Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed. |
| 61 | S&F in repair stepped type electronics fan regulator flush type (Socket Type) complete all as specified and directed. |
| 62 | S&F in repair modular Modular Switch 1 way 6 A, 1 module complete all as specified and directed. |
| 63 | S&F in repair modular Switch 1 way 16 A, 1 module complete all as specified and directed. |
| 64 | S&F in repair modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 65 | S&F in repair modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 66 | S&F in repair modular Regulator Step Type 120 watt, 2 module complete all as specified and directed . |
| 67 | S&F in repair modularBell push 6A, 1 module complete all as specified and directed. |
| 68 | S&F in repair Decorative city light aesthetically designed with B22d & E27 lamp holder made up of Polycarbonate suitable for 9/10 W including suitable LED Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and directed. |
| 69 | S&F in repair surface mounted decorative picture light of 10W die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of surface type any type & fixing arrangement for fittingcomplete all as specified and directed. |
| 70 | S&F in repair LED batten (1.2M) made of Aluminium housingwith a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 71 | S&F in repair and LED inverter type batten (1.2M) made of PVC housing sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 72 | S&F in repair and LED batten Essential Smart Bright MW batten is an Intelligent Standalone solution with micro wave sensors for movement detection. With factory set dimming profiles of 50% and 100%, light dims to these levels in case occupacy is not detected.Type HSN(1.2M) made of PVC housing sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 73 | S&F in repair 35 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having top opening and seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 including all fixing arrangemengt complete all as specified and directed. |
| 74 | S&F in repair12 W surface mounted downlightwith white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mountedcomplete all as specified and directed. |
| 75 | S&F in repair Recess15 watt mounted deep drawn1X1 feet CRCA housing with higher power LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and directed. |
| 76 | S&F in repair LED Lamp 9 Wattcomplete all as specified and directed. |
| 77 | S&F in repair Lamp holder , PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 78 | S&F in repair PVC hylum sheet 3mm thik top cover of size 250 x 200 x 3 mm all as specified and as directed. |
| 79 | S&F in repair PVC hylum sheet 3mm thik top cover of size 175 x 100 x 3 mm all as specified and as directed. |
| 80 | S&F in repair PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm all as specified and as directed. |
| 81 | S&F in repair single pole and neutral enclosure with a two pin and earth Plug and socket complete with one single pole MCB of 20 Amps rating complete all as specified and directed |
| 82 | S&F in repair MCB distribution board Vertical TPN DB having facility to fix MCCB in incomer and MCBs in outgoing, TPN 4 ways, IP 43 with metal door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. |
| 83 | S&F in repair MCCB of 4 pole type, 100 Amps current capacity, thermal magnetic type, 36 KA breaking capacity, 415 Volts complete including taking down old existing unserviceable all as directed. |
| 84 | S&F in repair Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way, 415 V with common bus bar at incomming end complete all as specified and directed. |
| 85 | S&F in repairSheet metal enclosure for MCB DB double door single pole & Neutral 8 way, 240 V with common bus bar at incomming end complete all as specified and directed. |
| 86 | S&F in repair Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way, 240 V with common bus bar at incomming end complete all as specified and directed. |
| 87 | S&F in repair MCB Four pole, 415 volts, 63 Amps, breaking capacity 10 KA complete all as specified and directed. |
| 88 | S&F in repair MCB \"C\" series Double pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. |
| 89 | S&F in repair MCB \"C\" series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed. |
| 90 | S&F in repair MCB \"C\" curve single pole 40-63 Amps with breaking capacity 10 kA, Catcomplete all as specified and directed. |
| 91 | S&F in repair Sheet metal enclosure for MCB DB single door single pole & Neutral 2 way, 240 V with common bus bar at incomming end complete all as specified and directed. |
| 92 | S&F in repair PVC casing caping of size 20-25 mm all as specified and directed. |
| 93 | S&F in repairPVC casing caping of size 25-32 mm all as specified and as directed. |
| 94 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor solid core served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 Core nominal cross section in service connections complete all as specified and directed. |
| 95 | S&F in repair PVC cable Junction Box IP66 \"halogen free and weather proof\" for out door installation sizenot less than 200 x 150 x 100 mm suitable for street light incoming and outgoing cables up to 10 to 25 sqmm 4 core (with terminal) & inclusive of MCB SP 10 Amp, 60A 04 strip aluminium Bus Bar, including nuts,bolts,cable glands & MS clamps fixed to pole complete all as specified and directed. |
| 96 | S&F in repair 10W LED Bollard IP65 rated Inverted Pyramid Tripod type with soft 360º light distribution, Pressure die cast powder coated housing with PC diffuser. Efficient high output LED with IP65 protection complete all as specified and directed . |
| 97 | S&F in repair of tri colour LED strip light 18m , 120 LED per meter with water proofing off IP65 for decoration purpose. Power consumption between 9 to 18W per meter with brightness level f 9.6-12w/mhaving luminous flux of 800-1500 lm/m with self adhesive tape for its installation all complete as specified and as directed. |
| 98 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.00 GI wire by means of bolts and nuts checknuts and washers of galvanised iron or steel all as specified and shown in elecrical plate no 3 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 80 mm bore 150 mm long reinforcement,watering funnel,40 mm bore light grade for protection of earth electrode 20 mm bore for watering all as specified and directed and tested on completion complete all as specified and directed. |
