|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all carriages etc complete |
| 5 | Supply & laying of GSB under floors in trenches, plinth, sides of foundations etc consolidating each layer by ramming ,watering, compacting, all inclusive leads, lifts, loading, un-loading, cost and carriage of material all complete. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl. all carriages etc all complete |
| 7 | Providing and fixing of MS Sheet door with 35x35x5mm angle iron with shutter frame 25x25x5mm fixed with plain MS sheet 2mm including all necessary fittings/Hardware items and steel primer/painting coat as required all complete job. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.including all carriage involved complete. |
| 10 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate.complete |
| 11 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) incl all carriage complete |
| 12 | 12mm thick cement plaster in 1:6 mix (1 cement 6 sand) etc all carriages complete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for: Edges of slabs and breaks in floors and walls etc complete |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incl. all necessary fittings/fixtures complete. |
| 17 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm dia nominal bore |
| 18 | 15mm nominal bore. |
| 19 | Providing and fixing of PVC fittings for PVC pipes of approved quality and make( prince B type). 100mm dia PVC Pipes |
| 20 | 75mm dia PVC Pipes |
| 21 | Plain Bend |
| 22 | Collar |
| 23 | Door Bend |
| 24 | Plain Tee |
| 25 | P-Trap |
| 26 | PVc Cliff |
| 27 | Door Tee |
| 28 | Floor Trap |
| 29 | Cowel Cap |
| 30 | PVC Elbow |
| 31 | P/F of C.P fittings of approved brand and make (Cera, Jaguar,Hindware ) or equavallent brand including all necessary fittings/Fixtures incl. carriages, handling etc all complete 15mm Bib Cock |
| 32 | 15mm Angle Valve. |
| 33 | Liquid Soap Dispenser |
| 34 | Steel Jali (Grattings) |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 36 | Wall Mixer |
| 37 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore. |
| 38 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm all complete. |
| 39 | Providing and fixing wash basin white vitreous china of required standard quality Cera, Jaguar,Parrayware, Hindware with C.I/MS brackets with C.i brackets, 15mm dia c.p brass single hole basin mixer of approved quality and make incl. white viterious china pedestal for wash basin all necessary fittings/fixtures all complete. |
| 40 | Laying of electric PVC Pipes 1\" dia in slabs incl. P/F of DP box for ceiling lights and fan box during construction work before electrification (for one slab and conduit pipes for walls all complete job. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm all complete. |
| 43 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick all complete |
| 44 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) all complete.Payment shall be made as per actual measurement. |
| 45 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). all complete. |
| 46 | Carriage of materials from approved source to site of work:- stone aggregate for an average lead of 10 Kms MT. |
| 47 | sand for an average lead of 10 Kms MT. |
| 48 | Bricks for an average lead of 50 Kms MT. Please Enable Macros to View BoQ information |
