|
| 1 | Demolition of brick work built in cement mortar in any description and position,complete all as specified. |
| 2 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 3 | All as per item no 02 before but except bricks |
| 4 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar1:4, complete all as specified. |
| 5 | M&L for cement concrete 1:2:4 type B1(using20mm graded stone aggregate) as in blocks for hold fast, coping,benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete allas specified. |
| 6 | Taking down cement plaster in concrete or brick wall surface of any thickness from brick or stonewalls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 7 | M&L for 15mm thick rendering in cement mortar 1:6 finished even and other thanfair surface on wall complete all as specified and directed by Engineer-in-Charge |
| 8 | M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and fair complete all as specified. |
| 9 | M&L for rendering 15mm thickon fair faces of brick work or concrete surfaces in CM 1 : 4 mixedfinished even and fair including taking down old plaster complete all as specified. |
| 10 | M&L Preparation of newly plastered surface applying two coats of Cement based paint onwalls complete all as specified. |
| 11 | M&L for preparation of newly plastered surface applyingtwo coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfaces complete all as specified. |
| 12 | M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed. |
| 13 | M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified. |
| 14 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 15 | Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm eachwith shutters (without taking off shutters from frames ), complete all as specified. |
| 16 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, complete all as specified. |
| 17 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified. |
| 18 | S& F 35 mm thick flush shutters(factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified. |
| 19 | S&F 35mm thick 2nd class Hard woodrail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides.The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated, complete all as specified. |
| 20 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made,open rebated and prepared to receiveglass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified. |
| 21 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc |
| 22 | S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, |
| 23 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified. |
| 24 | S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 25 | S&F in repair Prelaminated particle board 18/19 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing continuous Piano hinges, bright finish stainless steel, width of flaps when open 30mm with suitable size steel screws complete all as specified and directed . |
| 26 | S&F 100 mm long(size) butt hinges, medium weight, cold rolled mild steel, complete all as specified. |
| 27 | S&F 75 mm long(size) butt hinges, medium weight, cold rolled mild steel, complete all as specified. |
| 28 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified. |
| 29 | S&F in repairs 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 30 | S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified. |
| 31 | S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast aluminiumalloy and fixed, complete all as specified. |
| 32 | S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast aluminiumalloy and fixed, complete all as specified. |
| 33 | S&F 150mm long aluminium anodised barrel tower boltofextruded section, complete all as specified. |
| 34 | S&F 200mm long aluminium anodised barrel tower boltof extruded section, complete all as specified. |
| 35 | S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified. |
| 36 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified. |
| 37 | S&F in repairfloor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified. |
| 38 | S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed withscrews, complete all as specified. |
| 39 | S&F in repairs 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 40 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 41 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed. |
| 42 | S&F in repairs 4.00 mm thick plain sheet glasswith wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified. |
| 43 | S&F4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified |
| 44 | S&F 5.5 mm thicksheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller, complete all as specified. |
| 45 | S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified |
| 46 | S&F in repair double aluminium channel size 10x20x2 mm, complete all as specified. |
| 47 | S&F MS roller with \"C\" shape staple, chromium plated for 5.5mm thick sheet glass complete all as specified |
| 48 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 49 | M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified. |
| 50 | M&L for Preparation of oldpainted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified. |
| 51 | M&L for dismantling tiles laid dry or pointed of any size and thickness in walls and floors and complete removal of debris outside MOD land complete all as specified and directed. |
| 52 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed. |
| 53 | M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured complete all as directed. |
| 54 | S & F for coloured Non - skid Ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm( size 400 mm x 400 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed. |
| 55 | All as per item No 58 above butto 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all asspecified & directed. |
| 56 | M & L for600x600x08 to 09mm thick colouredvitrified tiles(joint less) (make of tiles as approved by GE)as in floor over, including pointing in coloured cement to match the shade of tiles including cleaning with water and applying cement slurry @ 3 kg/sqm on prepared surface of floor and including cutting/adjusting of existing door shutter at required height after taking down and refixing complete all asspecified directed. |
| 57 | All as per item No 60 above butto 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all asspecified directed by Engr-in-Charge, and approved by GE all as directed. |
| 58 | M&L for colouredglazed ceramic tiles 300x600 x 6 to 7mm / 300x450 x 6 to 7mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 59 | M&L for 16-18mmthick black granitestone work (table rubbed and polished) laid over and including 15mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window clips, cooking platforms and like,inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed. Granite stone slab shall be laid in single piece with rounding of edgesand a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be provided. |
| 60 | S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mmsection window grill as per approved sample and as per IS specificationsjoining cleat for fixing etc. complete all as specified |
| 61 | M&L for anodised aluminium door shutters, aluminium section weighing .55kg/Rmincluding necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed |
| 62 | S&F Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. Note: The window shutters shall be double leaf and double shutter/double shutter and single leaf. The rates qouted by contractor deemed to be inclusive of entire completion of work like glass panes 4.00 mm thick and stainless steel wire coth 0.36mm nominal dia of wire average width of aperture 1.40mm complete. Net area to be measured for payment purpose. |
| 63 | Taking up or down 15 mm dia GI tubing and connectionscomplete all as specified. |
| 64 | Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified. |
| 65 | S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed |
| 66 | S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified. |
| 67 | M&L for demolition of cement Concretepavings exc 15 cm thickness (below or above ground level) for EWC & IWC removing out cinder/ concrete from sunken portion and and (a)M & L for sunken portion filled with Cinder or 40mm graded brick bats overfinished with 50mm thickPCC 1:2:4 type B1 with water proofing compound including applying 2 layer of 85/25 Bitumen @ 1.20 Kg/Sqm each coat all as specified and directed (b) M & L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete Plus as specified .(c) M & L for providing 50 mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(d)Filling of sunken with brick bats as per requitrement.(e) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.all as specified and directed.Note : IWC/EWC Shall be measured and paid under relevant items seperately |
| 68 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets forbottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified. |
| 69 | S&F in repairstainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 915mm x 460mm x 200mm with bowl size 410mm x 330mm x 160 mm including taking out existingComplete including fixing of granite slab with and including providing suitable size groove for adjusting top level ,moulding of slab each side and polishedall as specified. |
| 70 | S&Fin repairsvitreous China coloured European type WC with \"P\" or \"S\" trap for 100 mm bore , including connection to rain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete complete all as specified . |
| 71 | S&F Rotational moulded polythylene 500 Ltr capacity waterstorage tank tripple layered WHITE (Cylindrical vertical with closed top) hoisted and fixed in positionwith float valve, tank connectionnippleincluding ofdismantling pvc water tankcomplete all asspecified. |
| 72 | Cleaning and removing all scales and dirt etc. of the tank by scrapping with hard plastic/nylon wire brush and washing it with bleaching powder solution and thereafter washing the same with clean water from service water tank and mouth of circulating pipe of capacity of tank upto 1000 litre complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F Rotational moulded polythylene 1000 Ltr capacity waterstorage tank tripple layered WHITE (Cylindrical vertical with closed top) hoisted and fixed in positionwith float valve, tank connectionnippleincluding ofdismantling pvc water tankcomplete all asspecified. |
| 74 | S&Fin repairs chromium plated soap dish, complete all as specified. |
| 75 | S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI. |
| 76 | S & F in repairs 15 mm diaBrass CP three-in-one wall mixer for mixing hot & cold with L bandwater screwed down for iron pipe and fixedcomplete all as spd. |
| 77 | S & F in repairs 15 mm diaBrass CP mixer long Neckfor sink mixing hot & Cold water screwed down for iron pipe and fixedcomplete all as specified. |
| 78 | S & F in repairs 15 mm diaBrass CPWHBMixer for mixing hot & Cold water screwed down for iron pipe and fixedcomplete all as specified . |
| 79 | Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 80 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box / M S steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc. all as specified and as directed for the followings:- |
| 81 | One light/exhaust fan point controlled by oneway switch |
| 82 | One bell/buzzer point controlled by one bell push |
| 83 | One light point controlled by two Nos two way switches |
| 84 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on independent board. |
| 85 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on same board |
| 86 | All as per item No 2 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge |
| 87 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through existing PVC conduit, including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box/M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate/3 mm thick laminated top sheet coverfor housing switches, socket out let and fan regulators etc. all as specified and as directed for the followings:- |
| 88 | One light/fan point controlled by oneway switch |
| 89 | One bell /buzzer point controlled by one bell push |
| 90 | One light point controlled by two Nos two way switches |
| 91 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on independent board. |
| 92 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on same board |
| 93 | All as per item No 4 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge. |
| 94 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 1module/2 module concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etcincluding make good of disturbed surface complete all as specified and directed by Engineer in charge.Note-Switch,socket, regulator will be paid separately |
| 95 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 3 module/4 module concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etcincluding make good of disturbed surface complete all as specified and directed by Engineer in charge.Note-Switch,socket, regulator will be paid separately |
| 96 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 6 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc.including make good of disturbed surface complete all as specified and directed by Engineer in charge.Note-Switch,socket, regulator will be paid separately |
| 97 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 8 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etcincluding make good of disturbed surface complete all as specified and directed by Engineer in charge.Note-Switch,socket, regulator will be paid separately |
| 98 | M&L in replacementswitch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. |
| 99 | M&Lin replacement switch modular type 6amp SP two way, 1 module complete all as specified and directed by Engineer in charge. |
| 100 | M&L in replacement Modular Bell pushbutton SP, 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge. |
| 101 | M&L in replacement Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge. |
| 102 | M&L in replacement switch Modular type 16 Amps 1 way, 1 module with modular plate 230V AC complete all as specified and directed by Engineer in charge. |
| 103 | M&L in replacement Modular socket outlet 2/3 pin 6/16Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 104 | M&L in replacement modular stepped type electronic fanregulator 120W, 2 module all as specified and directed by Engineer in charge. |
| 105 | M&L in replacement switch piano flush button type single pole one way 6 Amps complete all as specified and directed by Engineer in charge. |
| 106 | M&L in replacement switch piano flush button type single pole two way 6 Amps complete all as specified and directed by Engineer in charge. |
| 107 | M&L in replacement bell push single pole 6 Amps complete all as specified and directed by Engineer in charge. |
| 108 | M&L in replacement switch piano flushbutton type single pole 16 Amps complete all as specified and directed by Engineer in charge . |
| 109 | M&L in replacement socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directed by Engineer in charge. |
| 110 | M&L in replacement socket outlet 5 pin 6 Amp flush button type complete all as specified and directed by Engineer in charge. |
| 111 | M&L in replacement regulator electronic switch/socket type 5 steps suitable for 1200/1400 mm sweep 230 volts all as specified and directed. |
| 112 | M&L in replacement bell electric (ding dong) 230 volt, SPall complete all as specified and directed by Engineer in charge . |
| 113 | M/L in replacement insulated body, angle holder (metal ring) with back plate complete all as specified and directed by Engineer in charge. |
| 114 | S&F ceiling rose PVC/Polycarbonate type with three terminals complete all as specified and directed by Engineer in charge . |
| 115 | M&L in replacement sheet metalenclosure, single pole and neutralwith a two pin and earth plug and socket 240 Volts grade20Amps complete with onesingle poleMCB \"C\" series 10/20 A capacity complete all as specified and directed by Engineer in charge. |
| 116 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2000 systems lumen outputwith lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>70, Power Factor >0.90, THD< 10%, colour temperature-6500K, surge protection 2.5 KV in CM, IP-20 protected, Class-1,short circuit and over circuit protection, voltage range-180 to 270 Volts AC, temperature range 0 to 45 Degree C minimum andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. |
| 117 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained, CRI >70, power factor > 0.90, THD < 10%, color temperature >6500 K , surge protection 2.5 KV in CM IP- 20 protected,voltage range - 180 to 270 volts AC, temperature range 0 to 45 Degree C minimum, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. |
| 118 | S&F LED 2 X 2 ft backlite surface mounted fitting 36/40 Wattsnot less than 3600lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy>100 lm/W, CRI>70, color temperature >5700k, IP 20, Power factor<0.90, THD<10%, 25000 burning hours ,Ambient temperature 0 to 50 Deg C, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed. |
| 119 | Supply and fix LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria,Power Factor >0.90, driver with Voltage range 180-270V, Temperature range 0 to 45 Deg minimum, Driver efficiency >85%, THD<10%, CRI>70, Color Temperature-6000K, surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire completeallas specified and directed. |
| 120 | S&F in replacement of decorative type wall mounted luminaire (Comet)with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge. |
| 121 | Supply and fix surface ceiling mounted, LEDdown light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 100 Lumens/watt, 25000 burning hours, 6500K color temperature with CRI >70, Power Factor > 0.90, with multi stage high Isolate CC-CV operated driverwithvoltage variation range - 180 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire completeallas specified and directed. |
| 122 | Supply and fixing LED light fitting 1x16 watt flame proof CMRI certified recommended for explosive depot/ amunition stores IP-65 protection with diecast aluminium housing with heat resistant tougned glass with LED tube light fixtures, driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 123 | S&F 35W high efficient LED street light fitting with pressure die cast Aluminum housing and has lenses specially designed for street lighting with polycarbonate cover, system level efficacy of the luminarieshould more than 110 lm/W. Color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP-65 protected.It has an electronic driver with a power factor>.0.90, voltage variation range 180-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision ofsuitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 124 | M & L for opening up the winding of ceiling fan 1200/1400 mm sweep any make any type and rewinding with super enamelled copper winding wire after inserting super enamelled insulating material binding it with insulating tape etc completely and varnishing well including drying completely. Replacement of worn out /unserviceable capacitor bearing , bush , safety pins, nuts, bolts, washers , rubber bush with ceiling fan clamp, cable PVC flexible 23/0076 and testing the ceiling fan after re-fixing of the blades to the entire satisfaction of Engineer-in-Charge. |
| 125 | Supply and Fixing LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer in charge . |
| 126 | Supply and Fixing LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer in charge . |
| 127 | Supply and fixin repair MCB SPN 63 Amps 240 volts 10 KA 50 HZ \"C\" curve complete all as specified and directed by Engineer in charge. |
| 128 | Supply and fixin repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ \"C\" curve complete all as specified and directed by Engineer in charge. |
| 129 | Supply and fixin repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ \"C\" curve complete all as specified and directed by Engineer in charge. |
| 130 | Supply and fixin repair MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve complete all as specified and directed by Engineer in charge. |
| 131 | Supply and fixing ventilating fan250 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed. |
| 132 | Supply and fixing ventilating fan200 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed. |
| 133 | Supply and fixing exhaust fan450 mm sweep (steel Body), 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed. |
| 134 | Supply and fix wall mounted fan 400mm, 230 volts, 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system all as specified and directed. |
| 135 | S & F water heater storage type (Geyser) steel body, vertical type with suitable size of fastner and including provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tankmaterial of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure completeall as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product.Note : old unservicable geyser will be deposoted in MES yard. conversion against low rating to 5 star rating. |
| 136 | Supply and fixing wall mounted angular electric chimney black colour of suction power not less than not less than 1200Cum/Hr,Al casette with stainless steel outer layer, touch control panel,3 speedmotor with 250 watt with decorative smart cooker hood SS and glass, energy efficent LED light with digital display, including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge. |
| 137 | Supply and fixing ceiling fans complete with blade, down rods, with remote and accessories rated speed not less than 330 RPM, 230 V, 1200 mm sweep, air delivery not less than 220 CMM, BEEfive star rated voltage range 180 - 270 volts with brushess direct current motor (BLDC)all as specified and directed by Engr in Charge. (Against BLDC converson). Old fan shall be deposited to MES store yard. |
| 138 | S&F in repair sub main wiring with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface of walls complete all as specified and directed. |
| 139 | M&L for fan motor of ventilating fan 250/300mm sweep plastic body operated on single phase 230 volts 50Hz electric supply as per sample complete including making necessary electrical connections and testing on site after replacement all as specified and directed by Engr-in-Charge at site. |
| 140 | Supply and fix in repair sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduitin walls all as specified and as directed. |
| 141 | Supply and fix in repair sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduitin walls all as specified and as directed. |
| 142 | Supply and fix in repair sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduitin walls all as specified and as directed. |
| 143 | S&F plug top, 3 pin,20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer in charge. |
| 144 | S&F socket 3 pin20 amp earth metal clad(ISImarked) complete all as specified and directed by Engineer in charge . |
| 145 | S & F PVC Gang box surface type heavy duty suitable for single switch & socket 5 Amps complete all as specified and directed by Engineer in charge . |
| 146 | S & F PVC Gang box surface type heavy duty suitable for two switch & two socket 5 Amps complete all as specified and directed by Engineer in charge . |
| 147 | S & F Gang box surface type heavy duty suitasble for 15 Amps switch and socket complete all as specified and directed by Engineer in charge. |
| 148 | M & L forin replacement onlysingle core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge. |
| 149 | M & Lin replacement foronlysingle core PVC insulated cable2.5Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 150 | M & Lin replacement foronlysingle core PVC insulated cable4Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 151 | M & Lin replacement foronlysingle core PVC insulated cable 6Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 152 | M & Lin replacement foronlysingle core PVC insulated cable 10Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 153 | M&L in replacement copper cable flexible 2 corePVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge. |
| 154 | Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height not less than 0.6 meterwith IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire and cement work complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing new generation, post top energy saving environmently friendly 25W , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power LED as light sources. |
| 156 | Supply only SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed. |
| 157 | Supply only heating element of 2 KW any type with nut bolt washercomplete all as directed. |
| 158 | Supply only replacement of capacitor 3.15 Mfd,240 V complete all as specified and directed. |
| 159 | Supply only replacement of capacitor 1.5 Mfd,240 V complete all as specified and directed. |
| 160 | Schedule of Credit |
