|
| 1 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floors and paving, not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 3 | S&F rotational moulded PVC, triple layered, water storage tank of capacity 1000 litre (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position, including 25 mm dia brass ball float valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or with brass ferrule, and fixed including locking arrangements and fittings/ fixture to connect with existing pipeline complete all as specified and directed. |
| 4 | Framed work such as grills, gratings, sun sheds etc., with ends of bars shouldered and/or riveted or welded, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed. |
| 5 | S&F in repairs 15 mm dia gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and as directed. |
| 6 | Taking up or down GI tubing and connections 15 mm bore, including cleaning and stacking/removal to store, complete all as specified and directed. |
| 7 | S&F 15 mm dia uPVC pipes of pressure rating 10 kgf/cm², fixed to walls, ceiling or in floors etc., complete all as specified and directed. |
| 8 | Taking up or down GI tubing and connections 32 mm bore, including cleaning and stacking/removal to store, complete all as specified and directed. |
| 9 | S&F 32 mm dia uPVC pipes of pressure rating 10 kgf/cm², fixed to walls, ceiling or in floors etc., complete all as specified and directed. |
| 10 | S&F in repairs 32 mm dia gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and as directed. |
| 11 | Dismantling of stone/boulder masonry built in cement mortar, including all quoins, arches, pillars etc., but excluding ashlar facings and dressed stonework etc., complete all as specified and directed. |
| 12 | Material and labour for plain cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregate, as in benching/padding of roof slab to maintain slope, complete all as specified and directed. |
| 13 | M&L for providing precast cement concrete block masonry with solid blocks, exceeding 10 cm width, (1:3:6 type C-1 using 20mm graded stone aggregate) and set in cement mortar 1:4, complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of concrete surfaces and finishing even and smooth without using extra cement, including necessary scaffolding and safety measures as required, complete all as specified and directed. |
| 15 | M&L for preparation of new plastered/decorated wall surfaces and applying two coats of acrylic emulsion exterior grade paint over a coat of primer, including necessary scaffolding and safety measures as required etc., complete all as specified and as directed. |
| 16 | M&L for providing 15 mm thick rendering over roof slab in cement mortar 1:3 mixed with waterproofing compound @ 1% by weight of cement (or as per manufacturer’s instructions, whichever is higher), finished even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L for waterproofing treatment by applying oil bound bitumen primer having density 0.87–0.89 kg/litre @ 0.40 litre/sqm, providing and laying 3 mm thick APP modified waterproofing membrane weighing not less than 3.50 kg/sqm of approved make, including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching application, and finally finishing with two coats of solar reflective bituminous aluminium paint @ 0.1 kg/sqm, complete all as specified and directed. |
| 18 | S&F for PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to wall, 110 mm bore etc., complete all as specified and directed. |
| 19 | S&F 110 mm dia PVC (SWR) bend, complete all as specified and directed. |
