|
| 1 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 sqm on plan and getting out in soft/loose soil complete all as specified. |
| 2 | All as per item No 1 above but depth exc 1.5 metre and n exc 3 metre all as specified. |
| 3 | All as per item No 1 above but depth exc 3.0 metre and n exc 4.5 metre all as specified. |
| 4 | Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each in soft/loose soil,complete all as specified and directed. |
| 5 | Removing excavated material to a distance exc 250mtr but n.exc 500 mtr and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified. |
| 6 | Material and labour for brick work with sub-class \"B\" bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4complete all as specified and directed. |
| 7 | Material & Labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 |
| 8 | Material & Labour for Brick bats for loose filling in soak pit complete all as secified and as directed |
| 9 | Material & Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 10 | Supplying & laying in trenches Reinforce cement concrete pipe class NP-3 laid and jointed complete with collars of 200mm bore of pipe complete all as specified and directed by Engr-in-Charge. |
| 11 | Supplying & laying in trenches Reinforce cement concrete pipe class NP-3 laid and jointed complete with collars of 300mm bore of pipe complete all as specified and directed by Engr-in-Charge. |
| 12 | Material & Labourfor PCC 1:3:6 type C2(using 40mm graded crushed stone aggregates) for bed of sewage lines of 200mm bore nominal dia of pipe includingpacking under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 13 | Material & Labour for PCC 1:3:6 type C2(using 40mm graded crushed stone aggregates) for bed of sewage lines of 300mm bore nominal dia of pipe includingpacking under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 14 | Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) as in foundation and mass concrete incl nessary foRunning Metre work if required for drain bed / foundation of manholes etc complete all as specified and directed. |
| 15 | Material and labour for PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregates) as in benching for manholes, bands, coping, bed plate etc including necessary foRunning Metre work, if any and finishing exposed surface even and smooth using extra cement complete all as specified and directed. |
| 16 | Material & Labour for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 and finished the surfaces even and fair without using extra cement |
| 17 | Meterial and labour for PrecastRCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates)as in manhole cover and like set in cement mortar (1:4) including necessary foRunning Metre work complete all as specified and directed. |
| 18 | Material & Labour for high yield strength TMT steel bars, 6-8mm dia and over, cut to length, bent to shape as required including cracking, hoocking ends and binding with and including MS wire (Annealed) not less than 0.9 mm dia complete all as specified. |
| 19 | S&F MS Framed work such as rungs, handles of man hole covers steel framework for manhole covers etc., grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- foRunning Metreing to Fe.290.Gde-E-165 made to shape and placing in position complete all as specified and directed |
| 20 | Material & Labour for Cutting into existing manholes for connecting new drain making good for 150mm/200mm/300mm bore of pipes & rendering cutting out existing benching and foRunning Metreing branch (1/2round or ¾ section) channel in PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate surface finished even and smooth and refoRunning Metreing benching in reqd complete all as specified. |
