Tender For Installation Of Pvc Panels On The Gallery Walls On The Ground Floor Of The Karmayogi Bhavan At Raj Bhavan Premises, And Polishing And Repair Work Of Veneer Wall Paneling On The First And Second Floors., Lucknow-Uttar Pradesh
TDR : 54029405
Tender Notice
BOQ
3 Days Left
Lucknow
Uttar Pradesh
Tender For Installation Of Pvc Panels On The Gallery Walls On The Ground Floor Of The Karmayogi Bhavan At Raj Bhavan Premises, And Polishing And Repair Work Of Veneer Wall Paneling On The First And Second Floors.
Name of Work:- Installation Of Pvc Panels On The Gallery Walls On The Ground Floor Of The Karmayogi Bhavan At Raj Bhavan Premises, And Polishing And Repair Work Of Veneer Wall Paneling On The First And Second Floors.
Sl. No.
Item Description
1
Providing and Fixing Double layered 8mm thick 3mx0.25cm laminated PVC plank/wall panelling/False ceiling on vertical and horizontal steel bracing system on wall/ceiling with necesaary screws not bolt including all t&P and material for proper completion of the work.MR
2
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) 13.116
3
Painting with Deco paint for furniture over scrapped on old wood surface with Asian PU sealer including preparing the base with sprit polish sealer and sand paper , wooden putty & matching the colour with suitable pigment including supply of all material, labour T&P etc. complete. (Deco paint Interior side) MR Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
