|
| 1 | A.) Spares of Ash Slurry Pump Model: AR200/550 U# 1 & 2 |
| 2 | Impeller for Ist Stage pump with nut (Clockwise direction) Part No. 18 A Material NIHARD TYPE- IV |
| 3 | Wear Plate (Bracket Side) (Part No.16, Material:- NIHARD TYPE- IV) |
| 4 | Wear Plate (Suction Side) (Part No. 19, Material NIHARD Type - IV |
| 5 | Lantern ring (Part No 13, Material:- ASTM A743 CF 8M) |
| 6 | Oil Level (Seal) Indicator Part no 54 , Material Glass with Brass |
| 7 | Gland Housing (Part No. 9, Material ALLoy CI) |
| 8 | Inner casing (Part No. 17, Material NIHARD Type -IV) |
| 9 | Expeller [ Part No:- 14, Material:-NIHARD TYPE-IV] |
| 10 | Liquid Thrower (part no.11,Material:- ASTMA216 GR WCB |
| 11 | Flange( Suction Cover) |
| 12 | Lock Nut[ Part No:- 47, Material:-ASTM A216 GR WCB ] |
| 13 | Impeller for IInd Stage pump with nut (Anti-Clockwise direction) (Part No. 18 B, Material:- NIHARD Type -IV) |
| 14 | Shaft for I st Pump with nut (Clockwise direction) Part no. :- 4, Material :- BS 970 EN8) |
| 15 | Brearing Spacer (Part No.7, Material :- IS 210 FG 200) |
| 16 | Shaft Sleeve (Part No. 12, Material ASTM A 743 CA 15) |
| 17 | Shaft for IInd Stage pump with nut (Anti-Clockwise direction)Part No.-4, material- BS970 EN8 |
| 18 | Outer Bearing Cap (Part no.5 Material :- IS 210 FG 200) |
| 19 | Inner Bearing Cap (Part no.6 Material :- IS 210 FG 200) |
| 20 | Gland Ring (Part no.:- 24 Material:- ASTM A 216 Gr WCB) |
| 21 | Spring (Part no.:- 41, Material:- Steel) |
| 22 | Brearing Spacer (Part No.7A, Material :- IS 210 FG 200) |
| 23 | Dome Nut & T bolt |
| 24 | Outer casing(Bottom) & Outer casing(Top) (Part No. 15 & 20 ) Material IS 210 FG 260 |
| 25 | Spring Plate Part no. 41 A Material :- IS 210 FG 260 |
| 26 | Complete bearing assembly (fitted with shaft & bearing etc.) for lInd stage pump. |
| 27 | B.) Spares of Verticle Pump Model: VW 150/340A+ARS |
| 28 | Ratchet Collar Part No. 53.852, Material IS 226 C15 |
| 29 | Circlip Part No. 94.055, Material Steel |
| 30 | Drive Shaft (Part No.22.352), Meterial:-AISI 316 |
| 31 | Drive Column Pipe Part No. 72.352, Material ERW MS C Class |
| 32 | Pump Column Pipe Part No. 72.354, Material ERW MS C Class |
| 33 | Star Support(Part No.31.152,Meterial:-IS 210FG 200 |
| 34 | Bush Bearing(Pump/Star) 2 Set consist of each 2 No.) (Part No.:- 55.552 & 55.553,Meterial:-RUB MS SLEEVE) |
| 35 | Impeller(Part No.24.2,Meterial:-NIHARD TYPE-IV) |
| 36 | Wear Plate(B.Side ) (Part No.:-14.53, Meterial:-ALLOY CI) |
| 37 | Wear Plate(S.Side ) (Part No.:-14.54), Meterial:-ALLOY CI |
| 38 | Inner Casing Part No. 11.23, Material Alloy CI |
| 39 | Bearing Collar Part No. 53.952, Material IS 226 C15 |
| 40 | Bearing housing Part No.36.052Meterial:- 210 FG 200 ) |
| 41 | Gland Housing (Part No. 46.3, material:- IS 210 FG 200) |
| 42 | Pump Shaft (Part No. 22.3, Material:-AISI316) |
| 43 | Coupling Ring, Coupling Nut & Coupling Sleeve (Part No. 87.053,87.052,87.452, Material :- AISI 316) |
| 44 | Ratchet Pin (Part No. 53.752), Material AISI-410 |
| 45 | Bearing Cap with Ratchet Part No. 37.052, Material IS 210 FG 260 |
| 46 | Lantern ring (Part No 46.10), Material:- BS 970 EN-8 |
| 47 | Complete Pump Assembly with Motor Set, Model VW 150/340A+ARS, Discharge Cap 225 M3/Hr, Head 20 M, Size 150 x 150, RPM 1450, Input Power 30 KW, Input Voltage 415±10%, 50 Hz, Bare Pump with Base plate, Coupling, Column and Delivery Pipe, Strainer |
| 48 | Adjusting Screw Part No. 91.19, Material: IS 1363 MS (1 Set = 4 Nos.) |
| 49 | C.) Spares of Ash Slurry Pump Model: AR200/550 (04 Nos.) Unit # 5 & 6 |
| 50 | Split Gland |
| 51 | Wear Plate (B. Side) 16 |
| 52 | Wear Plate (S. Side) 19 |
| 53 | Impeller With Nut (Clock Wise Direction With DE) 18 |
| 54 | Lantern Ring 13 |
| 55 | Suction Cover 21 |
| 56 | Inner Casing 17 |
| 57 | Shaft Sleeve |
| 58 | Dome Nut & T bolt |
| 59 | Spring |
| 60 | Bearing Spacer (1 Set=2 Nos) |
| 61 | Gland Housing 09 |
| 62 | Bracket Side Cover 25 |
| 63 | Complete Bearing assembly (fitted with shaft & bearing etc.) |
| 64 | C.) MODEL : CHC 150/500, Capacity 240 M3/Hr. (04 Nos ) |
| 65 | Casing Cover (Part No. 17.3) Mtl. IS 210 FG 260 for Sam Make Pump Model CHC 150/500 |
| 66 | Pump Shaft (Part No. 22.3) Mtl.AISI 410 for Sam Make Pump Model CHC 150/500 |
| 67 | Casing Cover Plate (Part No. 17.7) Mtl. IS 210 FG 260 for Sam Make Pump Model CHC 150/500 |
| 68 | Bearing Bed (Part No. 34.2) Mtl. IS 210 FG 200 for Sam Make Pump Model CHC 150/500 |
| 69 | Bearing Cap (Outer) (Part No. 37.2) Mtl IS 210 FG 200 for Sam Make Pump Model CHC 150/500 |
| 70 | Bearing Cap (Inner) (Part No. 37.3) Mtl IS 210 FG 200 for Sam Make Pump Model CHC 150/500 |
| 71 | Impeller Nut (Part No. 93.4) Mtl AISI 316 for Sam Make Pump Model CHC 150/500 |
| 72 | Wear Ring (Casing, Casing Cover) (Part No. 51.4 & 51.23) Mtl IS 318 Gr.2 for Sam Make Pump Model CHC 150/500 |
| 73 | Deflector (Part No. 51.9) Mtl AISI 304 for Sam Make Pump Model CHC 150/500 |
| 74 | Lock Nut & Lock Washer Set (Part No. 94.03 & 93.3) Mtl SAE 1018/1020/IS 513 CRCA Sheet for Sam Make Pump Model CHC 150/500 |
| 75 | Pressure Ring (Part No. 46.9) Mtl AISI 410 for Sam Make Pump Model CHC 150/500 |
| 76 | Shaft Sleeve (Part No. 53.6) Mtl AISI 410 for Sam Make Pump Model CHC 150/500 |
| 77 | Complete Guard Pond Pump assy. (without motor), Model: CHC 150/500, Size: 250 × 150, Capacity: 240 m3/hr, 90 kw, Make: SAM Turbo |
| 78 | E.) MODEL : 13MD 80/205D (03 Nos. ) |
| 79 | Pump Shaft-I (Part no-22.3, Material AISI-4140) Please Enable Macros to View BoQ information |
