|
| 1 | Filling foundation and plinth with sand and wel watered & rammed etc . Complete including cost of sand . |
| 2 | Cement Concrete (1:4:8) by using 4cm. Size C.H.G. metal including cost, conveyance etc. complete. |
| 3 | Cement Concrete (1:3:6) by using 4cm. Size C.B.G. metal including cost, conveyance etc. complete. |
| 4 | Fly ash Brick masonary in cement mortar (1:6) by using 9\" size Bricks including all cost, conveyance etc. complete. |
| 5 | Fly ash Brick masonary in Superstructure in cement mortar (1:6) by using 9\" size Bricks including all cost, conveyance etc. complete. |
| 6 | 12mm thick cement plaster (1:6) for brick work (Per 1 Sqm.) |
| 7 | 16mm thick cement plaster (1:6) for brick or work stone masonry. Per 1 Sqm. |
| 8 | 6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 9 | Earth work in hard soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 10 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Column Foundation & Plinth) |
| 11 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Plinth Beam) |
| 12 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Column) |
| 13 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Roof Beam) |
| 14 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Roof Slab) |
| 15 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(Chhaja) |
| 16 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 17 | Providing and fixing Ceramic tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 18 | Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 19 | Finishing wall surface of walls with cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 20 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 21 | upplying Fitting Fixing of Iron Door and Windows Grill and Shutter including cost,transportation and fixing in places etc all complete. |
| 22 | Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 462 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood |
| 23 | Fixing of 0.40 mm thick G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fittings but including cost of sheet. |
| 24 | Supplying Fitting and fixing of MS truss,perlin, rafter including cost, conveyance and placing as per the direction of the Engineer in charge. |
| 25 | Priming one coat with any approved primer including cost of primer for Steel work. |
| 26 | Painting two coat with any approved enemal paint over Iron work including cost of paint |
| 27 | Providing and fixing Granite tiles (above 0.1 Sqm. & upto 0.40 Sqm.) in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 28 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete.r direction of Engineer-in Charge. |
| 29 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect |
| 30 | Suplying fitting, fixing up window ( Sliding type ) made up aluminium section 151 - 154, 151-155, as windows frame section No. 151-155, 151-153 & 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting ,cost of all materials, taxes, labour, T&P etc. complete. |
| 31 | Providing, fitting, fixing of Aluminium. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 6mm plain glass in top portion with 12mm thick pre laminated board in bottom portion fixed on door frame by means of apered clip No. 4660 & the frame to be completed by means of jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 32 | Supplying ,fitting and fixing 80mm factory made cement concrete inter locking paver block of m30 grade by Block making machine with strong vibratary compacted of a approve size design and shape laid in requred pattenrn died and mouding 50 mm thick of bad coarse sand etc. all complete as per direction of Engineer-in Charge. |
| 33 | Providing and fixing of Aluminium Composite Pannel glazing fixed to wall surface of approved make and quality with ACP 3mm thick to the exterior grade, the sizes of outer Aluminium square frame as 100 x 44mm, inner Aluminium square frame of 50 x 63mm, accessoriessuch as stainless steel screw, VHP tape, 789 grade Silicon, coir etc complete including cost, conveyance, taxesof all materials, labour, transportation charges, centering, shuttering charges etc as per specification and direction of theEngineer-in-charge. The sections are to be cut to length, meter joinedwith corner bracket and frame are fixed to the concrete/masonry walls by means of self expanding screws. |
| 34 | Supplying, Placing of good quality lawn grass including cost, conveyance and placing as per the direction of engineer in charge. |
| 35 | Supplying, Placing of good quality lawn grass including cost, conveyance and placing as per the direction of engineer in charge. |
| 36 | Supplying, Placing of good quality of ornamental flowering plants including cost, conveyance and placing as per the direction of engineer in charge. |
| 37 | Supplying, of good quality earth for plantation and landscaping including cost, conveyance and placing as per the direction of engineer in charge. |
| 38 | Supplying, Fitting, Fixing of CC Benches including cost, conveyance and placing as per the direction of engineer in charge. |
| 39 | Supplying, Fitting, Fixing of Ph materials for water supply including cost, conveyance and placing as per the direction of engineer in charge. |
| 40 | Supplying, Fitting, Fixing of electric name board and sign board with all fittings including cost, conveyance and fixing as per the direction of engineer in charge. |
| 41 | Provision for construction of transparency pillar with written charges and submission of working photo graphs Please Enable Macros to View BoQ information |
