|
| 1 | Providing and applying painting Two coats at all levels Acrylic emulsion paint (ACE or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty (putty for touch up to fill up crevices, mild depression etc.), scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 2 | Providing and applying painting Two coats at all levels with premium Plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty (putty for touch up to fill up crevices, mild depression etc.), scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 3 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-Charge for the following. |
| 4 | Upto 25mm average thickness |
| 5 | Providing and constructing brick masonry at all lifts using well burnt stock bricks / Flyash bricks in cement mortar 1:6 using crushed stone sand including suitable scaffolding, raking out joints, curing complete as per specifications and drawings for foundation, superstructure, etc. for the following |
| 6 | Upto FFL |
| 7 | Providing plastering to the external surfaces of brickwork/concrete at all elevations/levels in cement mortar 1:5 using crushed stone sand, 15mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications and as directed by the Engineer-in-Charge. |
| 8 | Providing plastering to the internal surfaces of brickwork/concrete at all elevations/levels in cement mortar 1:5 using crushed stone sand, 12mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications and as directed by the Engineer-in-Charge. |
| 9 | Providing and fixing white vitreous china flat back half stall urinal size 590 x 380 x 350mm Hindware or Parryware Newmagnum model or Equivalent approved make with PVC 15mm Inlet connection, Push cock, 15mm stop cock, C.P. brass spreaders, 32mm Urinal waste coupling with Dome grating, and clamp etc. including making G.I water line connection complete all as per drawings and specifications and as directed at site. (Only G.I. pipes will be paid under relevant Item) |
| 10 | Construction of Inspection / valve chamber of following size internally upto 1.00metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 using crushed stone sand with necessary brick carbelling as required, plastering with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement inside chamber and with cement mortar 1:5 using crushed stone sand, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 using 40mm size granite aggregates and crushed stone sand for foundation concrete forming benching in PCC 1:2:4 using 20mm maximum size graded aggregate and using crushed stone sand etc. complete all as per specification, drawing and as directed by the Engineer-in-Charge. |
| 11 | Inspection / valve chamber of internal size 600x600mm |
| 12 | Providing and fixing White Vitreous Indian water closet of Orissa pattern W.C. pan of size 580x440mm with integral type foot rest with 100mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15mm Inlet connection, with all fittings and fixtures, 15mm stop cock complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed at site. |
| 13 | Providing and fixing colour vitreous china European type water closet pan of approved pattern of Hindware or approved equivalent make, excluding the cost of other fittings but including necessary screws and jointing complete etc. all as per specifications and as directed by the Engineer-in-Charge |
| 14 | Providing and fixing Heavy Quality C.P. brass 15mm dia long body Bib cock \"Jaquar continental / Parryware coral model\" or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge) |
| 15 | Providing and fixing Heavy Quality 15mm nominal bore C.P. Brass Pillar cock \"Jaquar continental model\" make or approved equivalent make and type complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge) |
| 16 | Providing and fixing heavy quality 15mm CP brass Bib Taps Two way bib cock \"Parryware G0634A1\" or approved equivalent etc., complete all as directed by Engineer-in-Charge. |
| 17 | Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50metres flexible hose (Hand Shower) of \"Jaquar continental model\" or approved equivalent make and type complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge) |
| 18 | Providing and fixing Heavy Quality C.P Brass Waste coupling 38mm Dia and minimum 83mm length Half threaded or Full threaded as per requirement for wash basin and sink, of approved make, size and quality complete all as directed by Engineer-in-Charge |
| 19 | Providing and laying the following sizes PVC water supply line with \"Finolex / Varun / Truebore\" or approved equivalent make PVC pipes suitable for 6 kg/sq.cm pressure and specials conforming & marked to IS:4985 including jointing with PVC jointing compound, laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reducers, coupler, reducing bushes, threaded adaptor, elbow, tail pieces, caps etc., and testing the line as directed by the Engineer-in-Charge. |
| 20 | 25mm outer dia PVC pipe |
| 21 | 75mm outer dia PVC pipe |
| 22 | Providing and fixing PVC rain water downtake pipes conforming to IS:13592 Type A and PVC SWR Fittings & specials confirming to IS:14735, ‘Finolex’ or other approved equivalent make of pipes, fittings & specials including jointing with seal ring / with PVC solvent adhesive including fixing in walls/columns using clamps, anchor fasteners, bolts and teakwood packing pieces, joint testing etc complete all as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 23 | PVC SWR Rain water pipe 110mm outer dia |
| 24 | Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, sag rod, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required also arranged by the contractor at his own cost. |
| 25 | Providing and fixing roofing sheet, cladding with 0.47mm thick colour coated concelled system profile corrugated/semi corrugated/plain zincalume sheets of 55mpa yield stress (AS 1397 – Zincalume AZ 150) with coating class AS/NZS 2728 (minimum 150 grams per relevant standard) having a total coating thickness of 35 micron. The sheet should be rolled over specially designed concealed fixing clip manufactured from hi-tensile Aluminium Zinc alloy Zincalumen steel based and galvanized hooks. The clip should be fastened with minimum 40micron Zinc coated / minium 25micron Zinc-Tin alloy coated. The rate is inclusive of all fixtures required for fixing the side roof, cladding on all sides, ridges etc. complete all as per specification and as directed by the Engineer-in-Charge. |
| 26 | Providing and applying painting Two coats on required surface at all levels with Synthetic enamel paint (Asian or approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 27 | Removing and refixing the door & window shutters/ frames, false ceiling, glass partition, shifting of all damaged materials including necessary repair works like planning, replacing the damaged wooden frames/styles including replacing wornout screws with new once all complete as directed by the Engineer. (Necessary screws and hardware item will be supplied by the Department at free of cost). Note Teakwood quantity paid separately under relevant item. |
| 28 | Overall rebate (Optional) |
| 29 | INR Zero Only |
