|
| 1 | Refrigeration System |
| 2 | High Stage Screw Compressor operating at –5 °C SST / 38 °C SDT with all associated accessories. |
| 3 | Motor for compressor |
| 4 | VFD for the above motors |
| 5 | Common Economizer with all controls and accessories |
| 6 | Oil loading & unloading system (Common for all compressors) |
| 7 | Evaporative type Condenser with IE-3 Eff. Pump & Fan motors c/w all accessories |
| 8 | Priority Vessel for Thermo Siphon Oil Cooling System |
| 9 | Modification in the existing High Pressure Liquid Receiver with all valves and accessories |
| 10 | Minus 5 °C Low Pressure Liquid Accumulator of minimum size 1.52 x 3.6 -m |
| 11 | Refrigerant Liquid Pumps for –5 °C |
| 12 | Minus 30 °C Low Pressure Liquid Accumulator of minimum size 1.22 x 3.6 -m |
| 13 | Refrigerant Liquid Pumps for –30 °C |
| 14 | Air Purger – Automatic |
| 15 | Falling Film Water Chiller with valves, controls, instruments and all accessories for return water cooling of various loads Max. allow-able pressure drop of 0.5 Kg/ Sq.cm |
| 16 | Ice Bank Tank (indoor type) with stiffening arrangement made of MS Sheet including supports. |
| 17 | IBT Coil made of MS Seamless tubes of SA 106 Sc 40 and to be spray Galvanized after its fabrication of mini 110 to 120 microns |
| 18 | Tank Insulation |
| 19 | Agitator and its frame |
| 20 | FRP Covers for IBT |
| 21 | Chilled Water Pump for Process |
| 22 | Forced Draft Cooler with controls and accessories for Butter Deep Freezer (fin spacing not less than 8-mm) incl. liquid feed assembly. |
| 23 | Forced Draft Cooler with controls and accessories for Ante room of Butter Deep Freezer (fin spacing not less than 8-mm) incl. liquid feed assembly. |
| 24 | M.S Seamless Pipes, valves, fittings and accessories for refrigerant, oil lines, etc. SA 106 Sch 40 for temp. up to –19 °C and SA 333 for below –20 °C |
| 25 | GI B class Pipes, valves, fittings & accessories for cooling water, chilled water line connection and Additional Chilled water Main Header up to Process area & return lines, defrosting water, etc. as per Specn. |
| 26 | PUF pipes Insulation for pipes & vessels, equipment, etc. complete Alu cladding. |
| 27 | Main MCC for entire plant etc. |
| 28 | Sub MCC Panel for BDF Area |
| 29 | Power, Control, signal and instrumentation cables plus Cable trays & Accessories, chemical earthing & accessories |
| 30 | Automation / Control system of SCADA system |
| 31 | Instruments & Safety accessories including Ammonia Leak Deduction. |
| 32 | Compressor Oil and other consumables like Gas and charging hose |
| 33 | Harmonic Filter Panel |
| 34 | Chilled Water Unit made of SS Tubes for Butter Packing room |
| 35 | Dismantling and Shifting and Re-commissioning of existing BDF Reciprocating Compressors |
| 36 | High Stage Screw Compressor operating at –5 °C SST / 38 °C SDT with all associated accessories. |
| 37 | Motor for compressor |
| 38 | VFD for the above motors |
| 39 | First Charge of Oil |
| 40 | Interconnection pipes, its insulation, Power and control cables etc |
| 41 | PUF Panel & AccessoriesWalls & Ceiling insulation with all accessories for some of existing Old BDF Chambers |
| 42 | Internal electrification of some of the above BDF Chambers |
| 43 | Manual Sliding type Cold Store Door for Butter Deep Freeze Rooms with door heater |
| 44 | Manual Sliding type Cold Store Door for Ante room Butter Deep Freeze Rooms |
| 45 | Air Curtains and PVC strip curtain |
| 46 | Cold Store Safety Systems for some of deep freeze rooms. |
| 47 | Anything additional to above Please Enable Macros to View BoQ information |
