|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No 21.02 & Page No 153 ) |
| 2 | Transporting Excavated material at 2km etc complete. STATEMENT C-1 P NO -559 |
| 3 | Supplying hard murum at the road site including conveying and stacking complete. ( Item No.Road Sub grade 2.29a MORTH 408 Page No.29) (SSR Item No 2.29a & Page No 25) |
| 4 | Spreading hard murum/ soft murum/ gravel or kankar for side width complete. ( Item No.Road Sub grade 2.30 MORTH 408 Page No.29) (SSR Item No 2.30 & Page No 25) |
| 5 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering complete. ( Item No.Road Sub grade 2.31 MORTH 408 Page No.29) (SSR Item No 2.31 & Page No 25) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) Spec. No.: Bd. E. 1 Page No. 287 ( Item No.Plain Cement Concrete 24.01 BDE 1, Page No.131) (SSR Item No 24.01 & Page No 175) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No 24.10 & Page No 176) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.: Bd.F.11 Page No.304 and B.7, Page No. 38, (Item No. Reinforced Cement Concrete 26.17 BDF 11, Page No.240) (SSR Item No 26.17 & Page No 185) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Item No. Reinforced Cement Concrete 25.70 Bd.F.8 Page Number 302 and B.7, Page Number38 (SSR Item No 25.70 & Page No 137) |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306 ( Item No.Reinforced Cement Concrete 26.33 BDF 17, Page No.245) (SSR Item No 26.33 & Page No 188) Please Enable Macros to View BoQ information |
