|
| 1 | Item no.1 Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials, machinery. labour, dressing bed and sides to required level and profile etc. with 15m. lead and 6 m. lift. |
| 2 | Item no.2: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 15 m lead and 6 m. lift. |
| 3 | Item no.3: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 15 m lead and 6 m. lift. |
| 4 | Item no.4: Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc as per detailed design, drawing and schedules. Including, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete as directed. |
| 5 | Item no.5: Providing and laying in situ cement concrete of grade M. 150 (40 MSA) of trap/granite /gneiss/quartzite graded metal for PCC with or without surface reainforcement/ RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc. with cement concrete mixer with shuttering and scaffolding, curing with an initial lead of 1 km. and all lifts etc, completed as directed. |
| 6 | Item no.6: Back filling upto ground level behind the ground level behind the canal structures etc. completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structeur etc. completed |
| 7 | Item no.7: Straight Needle K. T. weir Gate-Manufacturing with QAP & fabrication of K. T. weir needle gates- straight type size 2.15 x 0.50 M-94 Kg. weight as per relevent Indian Standard with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, labour charges, machinery charges, 1 km lead charges of transportation, including loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/-5 micron and 2 coats of sloventless coal tar epoxy paint applied to give munimum dry film thickness of 150+/-5 micron per coat as per IS 14177 |
| 8 | Item no.8 Providing and fixing canal information board of size 1.20 x 0.75 m. prepared on 16 mm guage M. S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromite storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/ numeral arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement in M-15 block of size 60 x 60 x 75 cm as directed. |
| 9 | Insurance |
| 10 | Royalty |
| 11 | GST Tender Amount Rs.2042226/- Please Enable Macros to View BoQ information |
