|
| 1 | Cleaning and removing all scale and dirt, etc, with bleching powder from tanks 250 ltr to 500 ltr and from mouths of circulating pipes, etc and writing date of cleaning withpaint (neatly visible of letter size not less than 150 mm height) on the water tank and remove shrubs surrounding the water tank complete all as specified |
| 2 | Cleaning and removing all scale and dirt, etc, with bleching powder from tanks 500 ltr to 1000 ltr and from mouths of circulating pipes, etc and writing date of cleaning withpaint (neatly visible of letter size not less than 150 mm height) on the water tank and remove shrubs surrounding the water tank complete all as specified |
| 3 | S&F for 500 lts Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 nos 20mm dia full threaded GImultilayer Tank nipple,20 mm dia ptmt float valve epoxy coated aluminium road with high density plastic float ball(min wt is 210grm)and refixing inlet and outlet and overflow pipe etc all as specified in SSR Part 1 and taking down old Pvc/Rcc tank of any capacity |
| 4 | S&F for replacement for 1000 lts Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 nos 20mmdia full threaded GI multilayer Tank nipple,20 mm dia ptmt float valve epoxy coated aluminium road with high density plastic float ball (min wt is 210grm) and refixing inlet and outlet and overflow pipe etc all as specified in SSR Part 1 and taking down old pvc/Rcc tank of any capacity |
| 5 | Disconnectiong existing PVC water tank of capacity excedding 250 ltrs but not excedding 500ltrs setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnected and refixing in position after cleaning repairing etcall as specified and directed |
| 6 | Disconnectiong existing PVC water tank of capacity excedding 500 ltrs but not excedding 1000 ltrs setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnected and refixing in position after cleaning repairing etcall as specified and directed |
| 7 | S&F in repair PVC tank lid /coverwith locking arrengement for 500/1000lts capacity overhead complete all as specified |
| 8 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminiumrod& highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by the Engineer in charge. |
| 9 | Taking up or down, steel tubing 25/32 mm bore, and connection including cleaning for re-fixing and removalto store |
| 10 | S&Fgalvanized steel tubing medium grade, 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and as directed. |
| 11 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 25 mm borecomplete all as specified. |
| 12 | S&F in repair Gun metal , gate or globe valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed. |
| 13 | S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 14 | S&F in repair Bib tap long body fancy type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore all as specified |
| 15 | S&F in reapir angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified. ISI marked. |
| 16 | S&F in repairs CP mixer pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing\"Hot\" or \"Cold\" water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm. |
| 17 | S&F in repair15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make Jaquar Cat Part No.FLR5281N/CERA Cat Part No.F2008401/Hindware Cat Part No.F570022 |
| 18 | S&F in repair elegent mirrorPVC cabinetwith towel rail of size 450x600x150 mm all as specified |
| 19 | S&F in repairs shower rose fancy type bass chromium plated 125 mmheavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unionscomplete all as specifed and directed. |
| 20 | Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removalto store |
| 21 | Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removalto store |
| 22 | S&F galvanized steel tubing medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and as directed. |
| 23 | S&F galvanized steel tubing medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and as directed. |
| 24 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 15 mm borecomplete all as specified. |
| 25 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 20 mm borecomplete all as specified. |
| 26 | S&F in repair 75mm dia PVC (SWR) grade pipes single socketed in any length with rubber ring jointslaid in floors with and including fixing clips.including taking down old one |
| 27 | S&F in repair 75mm dia PVC (SWR) bends/branches including fixing clips.complete all as specified. |
| 28 | S&F 75mm dia PVC (SWR) grade single/double T with access doors including fixing clips.complete all as specified. |
| 29 | S&Fin repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified. |
| 30 | S&F 110mm dia PVC bends of any radius acess door. |
| 31 | S&F 110mm dia PVC (SWR) branch piece single (single \"Y\"/T) equal or unequalwith acess door.complete all as specified and as directed. |
| 32 | Taking down cement plaster on brick or stone walls or concrete beams columns/chajja etc racking out joints, hacking for key, scrubbing down with water etc any description in portionof bldgs all as directed. |
| 33 | Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed. |
| 34 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickworks complete all as specified and directed. |
| 36 | M&L for rendering 20 mm thick in CM 1:4as in fair faces of brick work or concrete surface of wall and finished surface even and fair without using extra cement complete all as specified and directed. |
| 37 | M&L preparation of new plaster surface and applying three coats of white wash on wall complete all as specified and as directed. |
| 38 | Demolition of Reinforced concreteslab of any Description |
| 39 | Supply and fixing for mild steel TMT bars, 8mm to 12 mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed. |
| 40 | M&L for formwork to sides of rough finished surfaces of concrete square or rectangular or polygonal to pillars, posts, struts, piers, columns complete all as specified as directed |
| 41 | M&L RCC Type B1 (1:2:4) (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and as directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking downcement plaster. |
| 43 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 44 | M&L for vitrified light shade floor/skirting tiles 10mm thick (square/ rectangular) area of each tile exc 0.42 sqm but nexc 1.00 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 45 | M&L Glazed ceramic / Digital elevation coloured tiles in vertical surface 300x600x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as diracted. |
| 46 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to recive a wall tiles using cement morter 1:4as specified as diracted. |
| 47 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness and any discription (below or above ground level) all as specified and directed |
| 48 | M&LPCC (1:3:6) type C2 using 40mmgraded stone aggregate, 75 mm thick in plinth protection/footpath laid in panel and finished even and fair including necessary from complete all as specified and directed Note : Joints 12 mmwide to the full depth pf PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of Bitumen and sand 1:3 by weight. |
| 49 | M&L for PCC 1:2:4 type B-I ,(using 20 mm graded stoneaggregate) as. in coping /benching to sides of foot pathfininished fair and even etc complete all as specified and direected. |
| 50 | M&L for 25mm thickpre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path over 20mm thick cement screed bedusing cementmortar (1:6) laid,all as complete and as specified anddirected. |
| 51 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified. |
| 52 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as Specified and as directed. |
| 53 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 54 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings . |
| 55 | S&F forPre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
