|
| 1 | Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed. |
| 2 | M&L for brick work with using sub class \"B\" brick,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as spfd and directed. |
| 3 | Taking down cement plaster of any description on brick or stone walls or from concrete surfaceincl racking out joints hacking for key scrubbing with water etc all as specified. |
| 4 | M&L for rendering15mm thickwith CM 1:4 on fair face and other than fair faces of brick work,finishing fair and evenwithout using extra cementcomplete all as spfd & directed. |
| 5 | M&L for applying two coat of oil emulsion distemper on wall old /newly decorative plastered/ unplastered wall/ceiling with 1 mm wall care putty over a coat of primer, upto any height ,after preparation. incl complete removal of existing treatment complete all as specified and directed |
| 6 | M&L for preparation of old/ newly plastered surfaces of wall and applyingtwo coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer\"s instructions including necessary scaffolding complete all as specified and directed by Engr- in Charge. |
| 7 | M & L for applyingone coat of synthetic enamel painton old paintedwooden surfaces of any descriptioncomplete all as specified including preparation and complete removal of existing treatment complete all as specified and directed . |
| 8 | M & L for applyingone coat of synthetic enamel painton old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed |
| 9 | Dismantling ofAsbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges , etc complete all as specified and directed |
| 10 | S&Fpre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 11 | S&Fpre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | Demolition Cement concrete (unreinforced)in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M&L providing cement concrete(1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base , lintels upto 1.5 mtr long,cills,steps, and other similar band, plinth course, string course, lacing course, parapets and railing upto 60cm in height, coping, apex stones, bed plate, water troughs and like including weathring, slightly rounded or chamfered angles and troughtingetc complete all as specified and directed. |
| 14 | M&L prepolished, machine pressed chequred cement concrete coloured tiles 30cm x 30cm x 25 mm thick, set , jointed and pointed in neat cement slurry with mixer ofwhite cement and pigmenetas in floors/pavements/ paths laid over screed bed or bedding layerin cement mortar 1:6, 20 mm thick screed bed complete all as specified and directed. |
| 15 | Dismantling floor, heart wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed |
| 16 | M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or whitecementto match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 17 | M&L for glazed coloured ceramic tile,first quality( of approved class , colourand design/ dark shade ) of size 300 x 450x7 / 350x450x7 / 350x250x7 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with colouredtiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 18 | M&L glazedvitrifiedcoloured tiles 10 mm thick dark shade(square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 19 | M&L glazed vitrifiedcoloured tiles 10 mm thick dark shade(square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 20 | Taking down of any chowkats or frame (Wooden, steel, aluminium, press steel, pvc etc.) with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 21 | Taking down of any chowkats or frame ( wooden, steel, aluminium. Press steel, pvc etc.) with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqmeach complete all as specified and directed. |
| 22 | Taking down shutters of any description exc 1 Sqmbut n. exc 2 Sqm each complete all as specified and directed. |
| 23 | M&L factory made 30mm thick 2nd class hard woodglazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed |
| 24 | S& Ffactory made 35 mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedall as specified and directed |
| 25 | M&L factory made 30 mm thick flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed |
| 26 | S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed. |
| 27 | S&F factory made solid PVC moulded door shutter withcore 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face and fixing to framecomplete all as specified and directed by enginer in charge, |
| 28 | S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 29 | S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 30 | M & L for praparation of newly steel surface over 10 cm width or girth and applyingtwo coat of synthetic enamel paintover one coat of redoxide primer complete all as specified and directed |
| 31 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth complete all as specified and directed |
| 32 | Re-securing or easing and adjusting without taking down shutters of any descriptionexc. 1.0 sqm but n exc 2.0 sqm each complete all spcified and directed. |
| 33 | S&F in repair for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squaren exc 0.5 Sqm in each pane complete all as specified and directed |
| 34 | S&F in repair for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spfd and directed. |
| 35 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including disturb surfase ofexisting position complete all as specified and directed |
| 36 | S&F hasp and staple 125mm size, safety type, aluminium adodisedwith mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) complete all as specified and directed. |
| 37 | S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (30mm Width of flaps when open) complete all as specified and directed. |
| 38 | S&FSS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed. |
| 39 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 40 | S&F 150mm long aluminiumhandles, cast type, anodized and fixed complete all as specified and directed. |
| 41 | S & F alunimiumsliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.complete all as spfd and directed. |
| 42 | S&F 300 mm long , mild steel ordinary rat tailrod pattern springs including roller and roller plate complete all as spfd & directed. |
| 43 | S&F in repair for s.s curtain railsminimum dia 25 mm, cromium plated includingbrackets, stops, rollers including fixing arrangement with drilling holes in wall brakets with screw etc completed all as specified and directed. |
| 44 | S&F for, grill, tec joist channel, MS pipe, angel,flat, or tee section, round or square bar as in post and strut, frame/chowkhat , in fencing including drilling holes notching for wire,welding etc, flat iron fillet (for securing wire mesh/chanelling fencing) incl all necessary drilling riveting ,bolts etc. similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 45 | S&F for 0.63 mm thick mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 46 | M&L welding in repairs exc.2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed. |
