|
| 1 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling/rppf/floors surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over priming coat premium quality on wall/roof surfaceupto 4th storey buildings complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 2 | M&L for preparation of old treated plastered or unplastered surfaces of walls/ceiling/roofs including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with puttyand applying one coat of wheather proofing exterior acrylic emulsion paint (Camouflage pattern) on walls complete . Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 3 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint(Camouflage pattern) to give an even and smooth surface having no sign of brush marks complete all as specified . |
| 4 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling/rpf surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling/roof surface upto 4th storey buildings complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer |
| 5 | Taking down cement plaster or cement lime plasteron brick,concrete or stone surfacesincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified |
| 6 | M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4)using water proofing compound, finished fair and even without using extra cement, complete all as specified. |
| 7 | Supply only intergral water proofing compound ISI Marked complete all as specified. |
| 8 | M&L Preparing of new surface of wall and applying twocoatsofexterior emulsion paint (Camouflage pattern)over a coat primer on walls complete all as specified and directed by Engineer-in-charge. complete all as specified and as directed by Engineer-in-Charge . |
| 9 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and directed. |
| 10 | M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation,filling and mass concrete & Sub base etc complete all as specified and directed. |
| 11 | M&L for 100mm thick PCC (1:2:4)type B-2, using 40mm graded stone aggregate as in hard standing etc complete all as specified and directed. |
| 12 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" complete all as specified and directed. |
| 13 | M&L for providing precast cement concrete of type C1, 1:3:6 using 20mm graded aggregate in kerbs including weathering, slightly rounded or chamfered angles and throating all as specified and directed. |
| 14 | M&L Applying two coat of synthetic enamel paintover a coat of primer on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of new surface complete all as specified and directed. |
| 15 | M&L Applying one coat of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface complete all as specified and directed. |
| 16 | Painting lines, dashes, arrows, letters, etc., on roads, pavements and the like exc. 10 cm wide with Retro-Reflective Thermoplastic road marking paint, white or golden yellow, conforming to MORT&H specification all as per manufacturer\"s specification and directed. |
| 17 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed and removal of debris outside MD land etc complete all as specified and directed. |
| 18 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removal of debris outside MD land etc complete all as specified and directed. |
| 19 | Sand filling under floors or in foundation including watering & consolidation complete all as specified and directed. |
| 20 | M & L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and no pigment. complete all as specified and directed. |
| 21 | M&L rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 23 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 24 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 25 | Taking down unserviceable convex mirror and supply and fixing 60 cmreflected convex mirror with 130 degree of viewing angle for outdoor (road side) purpose made of polycarbonate, ABS body fixed in position with hood with mounting hardware, complete all as specified and directed. Make : ACE Polymers (India) or equivalent approved make. |
| 26 | S&F in repair SS tubes, plates, chains, special articles of any size and shape fixed in position as in railings etc., including welding, polishing complete all as specified and directed. |
