Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.5mtr wide & not exceeding 1.5mtr in depth; for foundation, laying/taking out pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan & not exceeding 1.5mtr in depth and getting out, in soft/loose type soil complete all as specified & directed. |
| 2 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick each in soft/loose type soil complete all as specified & directed. |
| 3 | Removal of excavatedsurplus soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed. |
| 4 | Material and laboursand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cmdeep after laying the cable (punned down to 18 cm depth after laying and stretching of cable ) complete all as specified & directed. |
| 5 | Material labour for common burnt clay bricks, sub class \"B\" grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge |
| 6 | Material and labour for plain cement concrete (PCC) 1:4:8, type D-2, using40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete etc. complete all as specified & directed. |
| 7 | Material and labour for plain cement concrete (PCC) 1:3:6, type C-2, using40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete etc. complete all as specified & directed. |
| 8 | Material and labour for plain cement concrete (PCC) 1:2:4, type B-1, using20 mm graded mechanically crushed stone aggregates as in coping to pole etc. including necessary formwork to exposed surface finished even & smooth complete all as specified &directed. |
| 9 | Supply and fixing as in replacement cable jointing kit for 11 KV earthed grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE HT cable of size 240 sqmm to 300 sqmm complete all as specified & directed. |
| 10 | Supply and fixing as in replacement cable jointing kit for 11 KV earthed grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE HT cable of size 240 sqmm to 300 sqmm complete all as specified & directed. |
| 11 | Material and labour in replacement danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS clamps, bolts and nuts on pole, for HT of 25cm x 20cm size as per SSR Part-I complete all as specified & directed. |
| 12 | Material and labour repair / servicing / maintenance of transformer of capacity 315 KVA,11/.433 KV, indoor/outdoor type, installed at plinth/pole alogwith follwoing work services complete all as specified & directed:-(i) Disconnecting transformer from electric system and providing electric power to user from alternative arrangement including taking out from existing position .(ii) Decanning oftransformer oil , opening top cover , disconnecting of all internal connections , lifting and taking out ofcore assembly , LT / HT bushing , LV/HV winding, Tapchanger etc , cleaning and inspection of core and winding , segrigetion ofserviceable and unserviceable items , removing of sludge and cleaning tank and cooling pipes / fins /tankswith pressure water and drying the tank complete .(iii) Replacinig unserviceableLT / HT bushing by replacing rubber / cork oil seals and damage terminal rod &replacement of Transformer cover gasket of rubber cork sheet .(iv) Re-installation of transformer including reassembling of core / winding assebly complete including replacement of unserviceable parts, repair the defective parts and tighting of all loose / sparks wire / nut bolts etc and refixing theto the existing position, connecting with HT/LT cables and earthing strip and testing complete including necessary Transportation to & fro ( If required ) to the workshop and back.(iv) The rate of cork sheet & packing material for following cap of transformer are included in quoted rates.NOTE : (i) Dehydration of oil and filling of new Transformeroil shall be measured and paid seperately . (ii) HT & LT Busing, Tap Changer will bemeasured & Paid separataly.(iii) In case HV / LV Windingfound damages then Contactor shall be made serviceable with new winding and the same will be measured and paid seperately . |
| 13 | Removing of existing damage insulating material from LV Winding , Cleaning the winding and reinsulating the LV Winding with approved grade and make of insulating paper and heating the coil in the heat chamber to obtained desired result of insulating resistence complete and re-installation all as specified & directed. |
| 14 | Material and labour winding of HV side copper winding with super enammeled copper wire of existing size , gauge and weight of approved grade wire including necessary insulating material and heating the coil in the heat chamber to obtained desired result of insulating resistence complete including dismantling of old winding all as specified & directed. |
| 15 | Material and labour winding of LV side copper winding with existing size / type and weight of copper strip winding of approved gradeincluding rapping of insulating tap and insulating material and heating the coil in the heat chamber to obtained desired result of insulating material complete including dismantling of old winding all as specified & directed.Notes for Item Nos.14 & 15 (i) Contractor shall be open the core assrmbly and seperate the serviceable / unserviceable winding and shown to the EIC before and after incorportation to the TFR .(ii) Actual weight of the new winding shall be measured and paid .(iii) In case of damages of the LV Windings and required re insulation of LV Winding then shall be measured and paid seprrately . |
| 16 | Supply and fixing as in replacement replacement of Silica gel cristal complete all as specified & directed. |
| 17 | Supply and fixing as in replacement heavy duty breather assembly with Silica gel cristal for transformer as per existing shape and size complete all as specified & directed. |
| 18 | Supply and fixing as in replacement temprature guage (0 degree to 120 degree centigrade) range dial temprature complete all as specified & directed. |
| 19 | Material and labour fortransformer oil level indicator assembly complete with iron frame, glass, rubber packingsheet, nuts, bolts and washers etc as per existing complete all as specified & directed. |
| 20 | Supply & laying in replacement synthetic Rubber insulated matclass \"C\" 3.00mm thick for voltage upto 33 KVfor electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2 mtr x 1 mtr complete all as specified & directed. |
| 21 | Materials and labour for removing the burnt out/ damaged LV bushes with porcelain insulator and replace with Brass LV bushes, nuts , check nuts, rubber washer etc complete as per the existing size / model, for transformers ofcapacity 11/.433 KV, 315 KVA complete all as specified and directed. |
| 22 | Materials and labour for removing the burnt out/ damaged HV bushes with porcelain insulator and replace with Brass HV bushes, nuts , check nuts, rubber washer etc complete as per the existing size / model, for transformers of capacity 11/.433 KV, 315 KVA complete all as specified and directed.complete all as specified and directed. |
| 23 | De-hydration & filtration of transformer/AVR oil by using dehydration and filtration plant by means of Ultra High Vaccum double stage machine to remove impurities from oil such as moisture, dirt, air and other gases at site of installation in running condition of transformer including testing the oil before and after centrifuging from top and bottom of transformer to achieve the di-electric strength of minimum 50KV at 2.5mm gap between electrode withstand for one minute complete all as specified & directed.Notes:-(i) Dehydration plant shall be brought at site by the Contractor and shall also include the following provisions :- (a)Testing of transformer /AVR oil before & after dehydration.(b) Contractor will maintain a register of dehydration and filtration of each and every equipment as per format given by Engineer-in-charge and submit the same to Engineer-in-charge.(c) Dehydration will be carried out at site in presence of MES rep. |
| 24 | Supply & filling in replacement transformer oil of dielectric strength not less than 50KV to comply IS-335 of 1993 for topping up in different existing Transformers/AVR of any capacity located and installed at different places and different height complete all as specified & directed.Note:The transformer oil shall be brought at site and then as per requirement, oil should be shifted to next site. |
| 25 | Supply and fixing Off load Tap changer switch of existing model / type of Transformer of capacity 315 kVA complete all as specified and directed. |
| 26 | Materials and labour for preparation of old painted surfaces steel by brushing/changing stain, greasy spots with thinner and apply two coats of spray painting with super enameled paint of approved make and colourby Dept. after a coat ofzinc oxide primer to 11/.433 KV 315 KVA Transformer installed at any location any heightindoor/outdoor complete all as specified and directed. |
| 27 | Calibration of protective relay programmable type in HT VCBpanel with carrying out secondary injection test, set the relays in accordance with the supply agency Protection/Tripping range so as to trip the MES breaker before tripping the fault to supplier grid/ system. All parameter in MES breaker tripping setting in relays shall be arranged in such a way that any fault occured in the feeders after the recieving station must not transfer to the suppliers system complete all as specified & directed. Note : The calibration shall be carried from OEM or authorized agency of OEM as approved by the GE. Contractor shall submit the Caliberation certificate to Engineerr-in-charge. |
| 28 | Supply and fix in repair 3 phase 24 -240 Volts AC/DC supply over current + earth fault relay with high set having define time characteristics and last 30 trips data recording with date and time as well as password protection complete including necessary electric connections and testing all as directed as specified. |
| 29 | Supply and fixing as in repairheavy duty 3 pole power contactor, type MNX-110for three phase capacitors including necessary connections complete all as specified and directed. |
| 30 | Supply and fixing as in repairheavy duty 3 pole power contactor, type MNX-70for three phase capacitors including necessary connections complete all as specified and directed. |
| 31 | Supply and fixing as in repairheavy duty 3 pole power contactor, type MNX-32for three phase capacitors including necessary connections complete all as specified and directed. |
| 32 | Supply and fixing as in repairheavy duty 3 pole power contactor, type MNX-18for three phase capacitors including necessary connections complete all as specified and directed. |
| 33 | Maintenance / repairs to APFC panels, 3 phase AC 415 V, by skilled technicianand replacement of unserviceable spares as specified below for capacities 60 to 100 KVAR including replacement of short circuited copper conductor cables with appropriate gauge PVC insulated stranded copper conductor cables and cleaning of all moving contacts of relay contactors, tightening of all terminals and testing afer repairs to ensure serviceability and corrected output at specified power factor all as specified and directed at site. |
| 34 | Supply installation commissioning and testing of advance maintenance free enviroment friendly ring earthing system each set consisting of 3 nos of 10 feet long 17.2 mm dia earth electrode made of high tensile carbon steel circular rods moleculerly bound copper on outer surface ( min copper bonding thickness 250 microna) with terminals to connect incomung strip with 3 bags ( 60 kg each) of enviroment friendly portland cement based backfill compound ( Resistivity below 0.15 ohms) for each bore as per manufacturing instruction with ROHs test certificate for each 150x25x6 mm copper bar with 4 hole shall be exothermic welding on top to copper rod to terminal laid in a bore of dia 300 mm which inner dia of size 150 mm fill with backfill material and outer bore filling with 100 kg Bantonite in each bore . 25x3 mm copper strip shall be used to interconnect the earths and to make the ring and earth pit cover polypropylene (300mm x 300mm) duly enclosed in PCC pit of size 600 x 600 x 100 mm shall be included in the scope of work. NOTE- 1. Earthing shall be tested after completion of work by contractor in presence of Engr-in-Charge and proper record shall be kept duly signed by all concerned on testing if the earth resistance result is not less than 1.0 ohms than the earthing will be redone at no extra cost to Govt.. 2. The copper strip from earthing to and upto eqpt shall be measured and paid seperately under relevent items. 3. Test point measured and paid seperately. Make- OBO/JEF ECO Safe/ENNOV |
| 35 | Material and labour forEarthing to OH/Sub stn with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES Schedule pt-I 1991, GI earth lead wireprotected by GI pipe 15mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete Note : Main earth lead beyond 7.5 meter shall measured and paid saperatly. |
| 36 | Material and labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 37 | Material and labour for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 38 | Material and labour for copper strip 20 x 3.15mm with saddles and fixing screwsetc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 39 | Supply and fix in repair ACB 4 pole 415 volts , 630 -1000 amps , AC 50 Hz with breaking capacity 50 KA conforming to IS/IEC-60947-2 with themal magnetic releaseand manual drawout type ( Thermally adustable type ) inclding electrical connection as per site requirement complete all as specified and directed . |
| 40 | Supply and fixing as in replacement cable jointing kit for 11 KV earthed grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE HT cable of size 240 sqmm to 400 sqmm complete all as specified & directed. |
| 41 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 6 Sqmm 2 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 42 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 25 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 43 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 35 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 44 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 70 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 45 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 95 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 46 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 120 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 47 | Supplying, laying, jointing, testing & commissioning under ground XLPELT electric cable 1100 Volts grade, heavy duty,PVC insulatedand sheathed armoured electric power cable with stranded aluminium conductor of cross sectional area 240 Sqmm 3.5 core conforming to IS- 7098 (Part-I) 1988 laid as in trenches or fixed along the wall/pole through pipe etc. including taking down/out old unserviceable LT cable any size complete all as specified & directed. |
| 48 | Supply and fixingof GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. |
| 49 | Supply and fixingof GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. |
| 50 | Supply and fix in repair cable jointing kit for 1.1KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3.5/ 4core XLPE armoured Alminium conductor cable of size 25 to 50 Sqmm complete all as specified and directed. |
| 51 | Supply and fix in repair cable jointing kit for 1.1KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3.5/ 4core XLPE armoured Alminium conductor cable of size 70 to 150 Sqmm complete all as specified and directed. |
| 52 | Supply and fix in repair cable jointing kit for 1.1KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3.5/ 4core XLPE armoured Alminium conductor cable of size 185 to 400 Sqmm complete all as specified and directed. |
| 53 | Material and labour in replacement true vertical steel tubular, swaged welded pole conforming to IS-2713 part II , type 410 SP 31, 9 metre long complete with mild steel base plate of 6 mm thick of size 300 X 300 mm, finial taper plug, cap, bolts, nuts, washer and screws hole of required size and Nos. for fixing cross arms including painting externally with two coats of aluminium paint over & including one coat of zinc oxide primer for exposed surface and two coats of black bituminious paint for embeded portionin concrete as well as throughout internally including provision of blue & orange(AF pattern) colour strips with fluorescent paint upto 1.5 mtr height & nubmering of pole complete all as specified & directed.Note:-Excavation, earth work&PCCshall be measured and paid separately. |
| 54 | Supply and fixing ONload four pole changeover switch with front handleof 4 pole 415 volt 50 Hz 250 ampsin SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed. |
| 55 | Supply and fixing ON load four pole changeover switch with front handleof 4 pole 415 volt 50 Hz 200 ampsin SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed. |
| 56 | Material and labour in replacement danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS clamps, bolts and nuts on pole, for LT of 20cm x 15cm size as per SSR Part-I complete all as specified & directed. |
| 57 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB 3 Pole, 415 volts, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 58 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Triple Pole, 415 volts, 160 Amps, with adjustable thermal setting (80 to 100%) ,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 59 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Triple Pole, 415 volts, 250 Amps, with adjustable thermal setting (80 to 100%) ,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 60 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Triple Pole, 415 volts, 125 Amps, with adjustable thermal setting (80 to 100%) ,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 61 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Four Pole, 415 volts, 160 Amps, adjustable type,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 62 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Four Pole, 415 volts, 250 Amps, adjustable type,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 63 | Supply & fixing as in repairincluding making connection testing and commissioning ofnew MCCB Four Pole, 415 volts, 400 Amps, adjustable type,with breaking capacity 36 KA complete all as specified and directed.Note:Type of MCCB weather with operating knob or handle type shall be procured as per site requirement. |
| 64 | Material and labour for inspection , servicing and repair of DG sets of capacity 125 KVA with B check by authorised service engineers of manufactureres of the following capacities including minor repairs and replacement of worn out spares such as fuel filter, hose pipes, injector nozzles, cut out, electrical wiring, self starter, dynamo / alternator and tightening of nut bolts, washers, tappet adjustments, cleaning of head assembly including and de-carbonising,inlet and exhaust valves, grinding of valve seats, changing of lubricating oil, etc; complete includingtesting on loadall as directed. |
| 65 | Material and labour for inspection , servicing and repair of DG sets of capacity 250 KVA with B check by authorised service engineers of manufactureres of the following capacities including minor repairs and replacement of worn out spares such as fuel filter, hose pipes, injector nozzles, cut out, electrical wiring, self starter, dynamo / alternator and tightening of nut bolts, washers, tappet adjustments, cleaning of head assembly including and de-carbonising,inlet and exhaust valves, grinding of valve seats, changing of lubricating oil, etc; complete includingtesting on loadall as directed. |
| 66 | Material and labour for inspection , servicing and repair of DG sets of capacity 30/40 KVA with B check by authorised service engineers of manufactureres of the following capacities including minor repairs and replacement of worn out spares such as fuel filter, hose pipes, injector nozzles, cut out, electrical wiring, self starter, dynamo / alternator and tightening of nut bolts, washers, tappet adjustments, cleaning of head assembly including and de-carbonising,inlet and exhaust valves, grinding of valve seats, changing of lubricating oil, etc; complete includingtesting on loadall as directed. Notes for srl item Nos.64.00 to 66.00(i)Spares incl E/Oil required shall be measured and paid seperately under respective items of Schedule. (ii)The POL required for for carrying out test after repairs will be issued by the department. (iii) Testing of DG sets up to working load will be carried out after carrying out repairs to the entire satisfaction of the Engr-In- Charge.(iv)The rate quoted includes for all essential materials which are not otherwise specified in this schedule but are required to ensure smooth functioning of the DG Sets.(v) All T&P, manpowerand transport required to carry out the work at site including loading , un-loading etc; will be provided by the contractor. Cost of the same is deemed to be included in the quoted rates.(vi) All additionalsparesoil filter, air cleaner, oil pump repair kit, V- belt, Oil pipes, fuel pipe, water pump, head gasket kit,etc as required will measured and paid seperately. |
| 67 | Supply and fix in replacement oil pipe (Copper flexible tube) with check nuts for DG sets of any make / capacity complete all as specified and as directed. |
| 68 | Supply and replace\"V\" belt as per sample for DG set of capacity 125/100 KVA complete all as specified and as directed. |
| 69 | Supply and replace\"V\" belt as per sample for DG set of capacity 250 KVA complete all as specified and as directed. |
| 70 | Supply and replace\"V\" belt as per sample for DG set of capacity 30/40 KVA complete all as specified and as directed. |
| 71 | Supply and replacefuel flexible pipe, FIP to Filter, heavy duty with check nuts and benjo bolts, for DG sets of capacity upto 250 KVA complete all as specified and as directed. |
| 72 | Supply and replace air cleaner filter assembly complete suitable for DG set of capacity 125/100 KVA complete all as specified and as directed. |
| 73 | Supply and replace air cleaner filter assembly complete suitable for DG set of capacity 250 KVA complete all as specified and as directed. |
| 74 | Supply and replace air cleaner filter assembly complete suitable for DG set of capacity 30/40 KVA complete all as specified and as directed. |
| 75 | Supply and fixing as in repair oil pressure gauge compleete all as specified and as directed. |
| 76 | Supply and fixing as in repair temperature gaugecompleete all as specified and as directed. |
| 77 | Supply and fixing as in repair lub oil filter for DG sets of any make / capacity compleete all as specified and as directed. |
| 78 | Supply and fixing as in repair fuel filter for DG sets of any make / capacity compleete all as specified and as directed. |
| 79 | Supply and fixing as in repair ignition switch, 12 V with keys compleete all as specified and as directed. |
| 80 | Dismantling and taking down radiator assembly from engine of DG Set of capacity 125/100 KVA for repairs including de-scaling, bracing of inner tubes and body as required to plug leakages, repairs to radiator frame and tank including cutting and removing deteriorated inner tubes, chamber, frame etc.and re-constructing the same with same material in original size and shape, cleaning / straightening of fins and re fixing after repairs including replacement of worn out nut bolts, washers, aluminium water elbow,radiator cap, radiator beds etc; and pressure testing for leakage complete all as directed. |
| 81 | Dismantling and taking down radiator assembly from engine of DG Set of capacity 250 KVA for repairs including de-scaling, bracing of inner tubes and body as required to plug leakages, repairs to radiator frame and tank including cutting and removing deteriorated inner tubes, chamber, frame etc.and re-constructing the same with same material in original size and shape, cleaning / straightening of fins and re fixing after repairs including replacement of worn out nut bolts, washers, aluminium water elbow,radiator cap, radiator beds etc; and pressure testing for leakage complete all as directed. |
| 82 | Dismantling and taking down radiator assembly from engine of DG Set of capacity 30/40 KVA for repairs including de-scaling, bracing of inner tubes and body as required to plug leakages, repairs to radiator frame and tank including cutting and removing deteriorated inner tubes, chamber, frame etc.and re-constructing the same with same material in original size and shape, cleaning / straightening of fins and re fixing after repairs including replacement of worn out nut bolts, washers, aluminium water elbow,radiator cap, radiator beds etc; and pressure testing for leakage complete all as directed. |
| 83 | Supply and fixing in replacement, radiator assembly of DG set of capacity 125/100 KVA complete including all accessaries such as radiator core comprising copper tubes, fins, upper and lower tanks, radiator frame, inlet and outlet pipes, radiator cap etc,complete all as directed. Make - Kirloskar. |
| 84 | Supply and fixing in replacement, radiator assembly of DG set of capacity 250 KVA complete including all accessaries such as radiator core comprising copper tubes, fins, upper and lower tanks, radiator frame, inlet and outlet pipes, radiator cap etc,complete all as directed. Make - Kirloskar. |
| 85 | Supply and fixing in replacement, radiator assembly of DG set of capacity 30/40 KVA complete including all accessaries such as radiator core comprising copper tubes, fins, upper and lower tanks, radiator frame, inlet and outlet pipes, radiator cap etc,complete all as directed. Make - Kirloskar. |
| 86 | supply and replacement ofmaintanance free unserviceable battery 12 V, 150 AH with initial charging and testing complete all as specified and as directed.Make: Amaron/Exide/Microtek. |
| 87 | Supply and replacement of maintanance free unserviceable battery 12 V, 90 AH with initial charging and testing complete all as specified and as directed.Make: Amaron/Exide/Microtek. |
| 88 | Material and labour for cleaning of fuel tank of DG sets, of capacity 125/100 KVA emptying the fuel carefully and removing all sedimented particles including scales using wire brushes and keroseneincluding replacement of worn out transparent fuel level indicating tube including necessary fixing arrangements andmarking fuel levels on the tank using white synthetic enamel paint all as specified and directed. |
| 89 | Material and labour for cleaning of fuel tank of DG sets, of capacity 250 KVA emptying the fuel carefully and removing all sedimented particles including scales using wire brushes and keroseneincluding replacement of worn out transparent fuel level indicating tube including necessary fixing arrangements andmarking fuel levels on the tank using white synthetic enamel paint all as specified and directed. |
| 90 | Material and labour for cleaning of fuel tank of DG sets, of capacity 30/40 KVA emptying the fuel carefully and removing all sedimented particles including scales using wire brushes and keroseneincluding replacement of worn out transparent fuel level indicating tube including necessary fixing arrangements andmarking fuel levels on the tank using white synthetic enamel paint all as specified and directed. |
| 91 | Material and labour for replacement ofbattery terminal of brass suitable for 12V, 90 AH to 150 AH battery all as specified and directed. |
| 92 | Material and labour forreplacement of battery lead, copper conductor, single core, 25 Sq mm, multi stranded, PVC insulated with suitable terminals at both ends of lengths as per site requirements all as specified and directed. |
| 93 | Supply and fixing in repairs rubber hose pipe kit complete for radiator suitable for DG Set, capacity 125/100 KVAcomplete all as specified and as directed. |
| 94 | Supply and fixing in repairs rubber hose pipe kit complete for radiator suitable for DG Set, capacity 250 KVAcomplete all as specified and as directed. |
| 95 | Supply and fixing in repairs rubber hose pipe kit complete for radiator suitable for DG Set, capacity 30/40 KVAcomplete all as specified and as directed. |
| 96 | Supplyand fillling coolent suitable for DG set complete all as specified and directed. Make-: Castrol / Servo / HP |
| 97 | Supply and filling, Engine oil, multi grade 20 W 40 or equivalent gradeof make : Castrol / Servo / HP |
| 98 | Supply and fixingLED type street light 35 watt 230 volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. |
| 99 | Supply and fixingLED type street light 60 watt 230 volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed.. |
| 100 | Supply and fixingLED type street light 90 watt 230volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. |
| 101 | Supply and fixingLED type flood light 70 watt 230 volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. |
| 102 | Supply and fixingLED type flood light 100 watt 230volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. |
| 103 | Supply and fixingLED type flood light 120 watt 230volts AC outdoor type with t IP 65 classprotection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, totallumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. |
| 104 | Supply and fixing post top lantern LED type 40 watt 230volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 classprotection with aluminium die cast housing cum heat sink circular canopy and clear acrylic cover for 360 degree indirect uniform glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, total system lumen not less than 3200 lumens lumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete all as specified and directed.. |
| 105 | Supply and fixing LEDBollard 10 watt 230 watt volts AC outdoor type with decorative for 360 degree indirect light IP 65 classprotection with aluminium die cast housing cum heat sink circular at the top and opaque acrylic cover for 360 degree indirect uniform glare free light distribution impact and corrosion resistant operating voltage range140v to 270 V, total system lumen not less than 3200 lumens lumen efficiency =80 lm/watt , THD≤20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complete fixed as in repair all as specified and directed. Note- Earth work and PCC shall be included in quoted rate. |
| 106 | Supply and fixing as in replacement of PVCSMC boxes with hinged door fixing of size 333mmx233mmx120 mm with MS clampmade to shape with necessery nut bolts and washers complete comprising of Aluminium busbar 63 Amps capacity of suitable size mounted over porcelain insulator with nut bolts & washers incl MCB 6 Amps and making incoming and outgoing connections by taking out loops of cable of any size incl necessary excavations and other civil works all as specified and directed. Make- 1.Sintex 2.Universal 3.SMS |
| 107 | Supply and fixing as in Rep/Replacement of cable PVC insulated unarmored for connection 2.5 Sqmm 3 core copper conductor duly drawn from junction box to street light fitting on poles in PVC Flexible pipes complete all as specified and directed. MAKE- 1. Havells 2.phinolex 3.wipro |
| 108 | Material and labour for scrapping of surface of steel tubular poles of any size with emery paper and painting of poles with one coat of primer and two coats of aluminium paint of approved make incl writing pole nos on white backgrounds with black paint ,complete all as specified and directed. |
| 109 | Supply and fixingdriver circuitof any make or any model on existing LED street lightluninatrie of wattage 45 to 120W complete all as specified and directed. |
| 110 | Supply and fixingdriver circuitof any make or any model on existing LED Flood lightluninatrie of wattage 60 to 180W complete all as specified and directed. |
| 111 | Supply and fixing surge protector of any make or any model on existing LED street/Floodlightluninatrie of wattage 45 to 120W complete all as specified and directed. |
| 112 | Material and labour forreplacement ofstreet light bracket made out of 40 mm dia light grade GI pipe bend to shape not less than 1.8 mtr length along with 02 Nos fixing clamps properly shaped and fabricated out of 50 x 5 mm thick MS flat nut & bolts duly painted with 2 coats of aluminium paint over 1 coat of red oxide complete all as specified and as directed. |
| 113 | Disconecting the LT incoming and outgoing main cables of any size ,strip opening of thevoltage stablizer of capacity100 to 150KVA , draining out the oil into a cleaned container ( container shall be arranaged by the contractor ).Lifting up dimmer and transformer with help of tripoid and chain pulley etc (TheT & P shall be arranged by contractor ), checking of all the parts ,cleaning and servicing of the container,dimmer,transformers coil and allied parts including replacememnt of minor parts like nut bolts ,connecting wires ,rubber seals /packing etc . and reassembling the volt stablizer complete (in reverse order.). Refilling oil after dehydration andfiltration/cleaning by centrifuging machine including testing of samples before and after dehydrations and filtration complete, and reconeecting the incoming and outgoing cable connection, commisioning and testing of the volt stablizer on load complete all as specified and directed.Note: The cost of dehydration of oil shall be measured and paid under respective item of schedule |
| 114 | M & L for complete repairing / Serviceing of HT 11 KV Vaccum circuit breaker (VCB) after disconnecting of all incoming and outgoing connection, checking/finding of the defective spare/parts, removing of all moisture content with suitable grade chemical, replacement of rusted nuts,bolts and washer, replacement of all unserviceable post insulator and repair of all busbar joints and covered with HT insulation tape, painting of all internal surface where required and complete external surface as per existing colour and quality, replacemnt of all defective internal AC/DC circuit wiring, repair/servicing of breaker trolly including motorized operating mechanism, CT/PT, power pack and calibration of triping relays system and tripping mechanism for regulating the fault flow (Over Current, Earth Fault, Differential)in sequence from down streem to receiving Sub stn for accuracy andeffective functioning of VCB complete all as specified and as directed.Notes :(i) Nuts , bolts, washer, painting, cleaning material, insulation tape, copper wire for circuit wiring and defectiveHT 11 KV 2 Amp fuse , carrier oiling greasing to charging spring ,replacement of HRC fuse 110/220 volt 5 Amps setting of overcurrent ,complete other minor items for repair of breaker shall be deemed in qouated rate. (ii) Replacement of major unserviceable spares/accessories shall be measured & paid separately under relevant items of this Schedule ‘A |
| 115 | Supplyonly shunt trip coil assembly suitable for HT VCB , operating on 30/110 volt system and testing complete all as specified and directed . Make: Crompton / AE/Siemens or existing model . |
| 116 | Supplyonly closing / tripping coil operated on 110/30 volt system suitable for working of relay for HT VCB complete all as specified and directed . Make: Crompton / AE/Siemens or existing model . |
| 117 | Supply only Analogue Amp-meter CT operated of size 144 mm x 144mm, suitable for HV panel board 11000 V ranging 0 to 100/50 Amp complete all as specified and as directed. Make: AE/Siemens/CG/Recom. |
| 118 | Supply only Analogue Volt meter of size 144 mm x 144 mm, suitable for HV panel board 11000 V, ranging 0 to 15 KV (excluding PT) complete all as specified and as directed.Make: AE/Siemens/CG/Recom. |
| 119 | Supply and testing Epoxy resin cost totaly enclosed dual core type Current transfomer (CT) for protection and measuring of system having ratio of 100/50 : 5 / 5 A , Burden-10VA, class-I, insulation level 12/28/75 KV, STC- 18.4 KA for 1 secas per ISS-2705 and IEC-60044 including dismantling of old one complete all as specified and directed .Make: Kirloskar/Crompton Greves/Siemens. |
| 120 | Supply and testing voltage transformer of ratio 1100 RT3 / 110RT3V Acc class 1.0 burden 200 VA STC 25 KA for 1 sec including copper extention strips of required size and rating complete all as specified and directed .Make: Areva(Alstom)/Crompton Greves/Siemens. |
| 121 | Supply only power factor meter digital type of 146 mm x 146 mm suitable for fixing with the existing panels including taking out of old unserviceable PF meter . |
| 122 | Supply only spring charging motor suitable for fixing with 11 KV indoor type VCB panelcomplete all as specified and directed . |
| 123 | Supply only charging bottle suitable for 11 KV VCB trolly complete all as specified and directed . |
| 124 | Supply only moving contacts of VCB made of copper and suitable for 11 KV VCB Trolley complete all as specified and directed . |
| 125 | Supply only battery 2 volts , 100 AH for battery bank installed at power housecomplete with termination clips complete all as specified and directed . |
| 126 | Supply only battery charger suitable for charging to battery bank 2 volts 100 AH (15Nos) including digital type volt meter , amp meter etc complete all as specified and directed . |
| 127 | Supply only Heater 230 volts AC 60 watt for 11 KVHT VCB panel complete all as specifed and as directed. Make :Heatco/Vileco Electrical. |
| 128 | Supply only Neon indicator lamp LED type with high intensity40-240 volts AC and 40-220 volts DC with holder complete all as specified and as directed. Make:- Vanishns/AE/Recom |
| 129 | Supply only limit switch 110 volts operated suitable for HT 11 KV VCB charging motor circuit. Make: BCH/Crompton Greaves/STS. |
| 130 | Supply only copper bus bar of size 50 mm X 6 mm thick wrapped with HT sleeves and provision of making holes as required with copper nuts, bolts & washers suitable for HT 11 KV VCB panel complete all as specified and as directed. |
| 131 | Supply only vacuum interputer for HT11 KV VCBs, 630 Amps, brakding capacity 13.1 KA suitable for Alstom make VCB complete all as specified and as directed. Make :- Bharat Electronics/CG/Areva/Alstom |
| 132 | Supply & install, testing and commissioning in replacement of outdoor type floor mounted LT panel suitable for 415 volts, 3 Phase 4 wire, 50 Hz AC supply sysytem conforming to IS : 8623/93, floor mounted, factory made, weather and vermin proof, fully ventilated and fabricated out of angle iron 40mm X 40mm X 6mm thick frame work and CRCA sheet 3mm thick having Aluminum bus bar of rating 400 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the outer shell shall not less than 1000mm X 750mmX 500mm,mounted on angle iron stand made out of size 40mm X 40mm X 6mm grouted of digital volt meter & Amps meter with CTs including taking down of old existing panel complete including following accessories all as specified and directed :- (a) Bus bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 315 Amps aluminium strip-1 Set (b) MCCB400 Amp 35 KA 4 pole - 01 No ( Incoming) (c) MCCB 160Amp 25 KA 4 Pole - 03 Nos (Outgoing) (d) MCCB 100 Amp 25 KA 4 pole- 03 Nos (Outgoing) (e) Volt meter digital 0-500 volt =01 (f) Amp meter digital 0-300 Amp= 01(g) Indicator lamp Yellow, Red, Blue-01 Set |
| 133 | Supply and fixing in replacement of unserviceable display board for solving details of Power House and Pump house as provided by Engineer-in-charge made out of white PVC sheet of size 1.75m1.3 meter including GI angle frame and GI sheet cover to the frame and fixing LED strip light connecting electrical supply to the frame with copper wire 2 core 1.5 sqmm from nearby electric source including round steel pole minimum 12 feet long of suitable dia for erection on ground with PCC complete all as specified and directed by Engineer-in-charge..For Credit Schedule, refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
