|
| 1 | Charpoy With Hard Top (MAP) Steel (FD/MAP-II/01) |
| 2 | Removing the existing worn out UNSV Ply wood from Charpoy With Hard Top (MAP) Steel as per drg & directed by Engineer -In -Charge. |
| 3 | Removing old Plytop from Charpoy With Hard Top (MAP) Steel & S&F of new plywood made out of 12mm thick plywood commercial BWR grade, ISI Markon top fixed to each cleat with counter sunk nut bolt & washer of required length all as specified and diredted by Engr-in-charge. Make of ply : Greenply (Ecotec)/Century (Sainik MR)/Kitply (Vista) |
| 4 | Removing old U/S stiffner from charpoy and S&F with welding of new stiffner made out of MS Square Tube 25 x 25 x 1mm thick between long rail to long rail as directed by Engr-in charge. |
| 5 | Repair to Table 900 x 900 x 760 mm, wooden(FD-88 ):- |
| 6 | Removing UNSV/broken top of table and S&F new top made out of 18 mm thick MDF board (HDMR 710) size 900x600 mm including 4 mm thick 1st class hard wood teak edging all round of table top complete all as specified and shown in drg. Make of MDF Board : Greenply/Century/Action Tesa |
| 7 | Removing UNSV/broken legs of table and S&F new legs, made out of 1st class HW (Indian Teak) made to shape and size duly French polished fixed with glue and bamboos pin all as specified and shown in drg. |
| 8 | All as per item No.2.02 above but front/back rail of table. |
| 9 | All as per item No. 2.02 above but side rail of table. |
| 10 | Repair to Table 900 x 600 x 760 mm, wooden (FD-42 /231/ 284/223) :- |
| 11 | Removing UNSV/broken top of table and S&F new top made out of 18 mm MDF board(HDMR 710) of size 900x900 mm including 4 mm thick 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.Make of MDF Board : Greenply/Century/Action Tesa |
| 12 | Removing UNSV/broken legs of table and S&F new legs, made out of 1st class HW (Indian Teak) made to shape and size duly French polished fixed with glue and bamboos pin all as specified and shown in drg. |
| 13 | All as per item No.3.02 above but front/back rail of table. |
| 14 | All as per item No.3.02 above but side rail of table. |
| 15 | Repair to chair Computer /revolving tilting/office chair revolving(FD-75(M) /FD/E6/MAP/01) /FD-4103 |
| 16 | Removing the old UNSV/worn out wheels from the chairs, replacing with new nylon/PVC wheel duly fitted to the chair with suitable size of screws all as shown in drawing anddirectedby executive on ground. |
| 17 | Removing the old UNSV/worn out Gas lift mechanism/pnuematic pump from the chair, replacing with new high quality gas lift mechanism pump alongwith titling bolt suitable size duly fitted to the chair all as specified and directed by executive on ground. |
| 18 | Removing the old UNSV/worn out Arm rest (Handle) from the chair, replacing with new D type PU soft/Hard handles of suitable size duly fitted to the chair with screws/Bolt at required size all as specified and directed by executive on ground. |
| 19 | Removing the old UNSV stand Base from the chairs, replacing with new stand made up ofBase PVC with wheel of reqiured size to be fitted to the chair at original shape complete all as specified and directed by executive on ground. |
| 20 | Removing the old UNSV seat from the chair, replacing with new seat made out of 12mm thick moulded ply sheet andchemically treated and cushioning covered by fabric/Leather cloth as approved by GE all as specified and directed by executive on ground. |
| 21 | Removing the old UNSV back from the chair, replacing with new back made out of 12mm thick moulded ply sheet andchemically treated and cushioning covered by fabric/Leather cloth as approved by GE all as specified and directed by executive on ground. |
| 22 | Repair to chair Varandah FD/MAP-II/06 & 15 |
| 23 | Removing oldUNSV/Broken PVC seat & Back from chair varandah & providing and fixing new PVC Seat & Back for chair varandah all as specified on drawing and as directed by executive on ground. |
| 24 | Repair to sofa set 4 seater(FD-373) |
| 25 | Repair to sofa set 4 seater FD-373 by removing old unserviceable seat & back by replacing with new foam/cushion, 40 density 100 mm tapestryas specified and shown in drg (Rate of Tapestry shall benot less than Rs 200/-per mtr) |
| 26 | Repair to table dining1200x900x760mm(FD/E6/MAP-II/03 ) |
| 27 | Removing UNSV worn out top of table and S&F new top made of 18 mm thick MDFboard(HDMR 710) of size 1200 x 900mmincluding 4 mm thich 1st class hard wood teak edging all round oftable top complete all as specified and shown in drg. Make of MDF Board : Greenply/CenturyAction Tesa |
| 28 | Removing UNSV worn out legs of table and S&F new legs made out of 1st class HW (Indian Teak) made to shape and size as per drg duly French Polished, fixed with glue and bamboos pin complete all as specified & shown on Drgs. |
| 29 | All as per item No. 7.02 above but long rail of table dining. |
| 30 | All as per item No. 7.02 above but shortrail of table dining. |
| 31 | Rapair to chair Varandha (FD-19(M)/256/359) |
| 32 | Removing old wornout/ UNSV plastic cane from chair varandha, welding the loose/broken portion of chair frame whereverrequired and applying one coat of synthetic enamel paint white on frame. recanning the chair with 5mm x 0.4mm thick plastic cane good quality (recycled cane shall notbe used.Provided with 04 Nos rubber shoes to legs of chair varandha.All as specifiedon drawing and as directed by executive on ground. |
