|
| 1 | PCC POLE 8.5 MTR. [PS. No.24c.2] |
| 2 | ACSR RABBIT CONDUCTOR [PS. No.24c.16] |
| 3 | 11 KV Polymeric Pin Insulator with nut [PS. No.24c.6] |
| 4 | 11 KV Disc Insulator Polymeric 70 KN [PS. No.24c.13] |
| 5 | 11 KV Disc Fitting 70 KN [PS. No.24c.14] |
| 6 | 11 KV Cross arm MS Angle 65x65x6 mm V-Type [PS. No.24c.4] |
| 7 | 11 KV Pin with nut [PS. No.24c.7] |
| 8 | GUARDING ANGLE [PS. No.24c.8] |
| 9 | MS T-OFF Channel [PS. No.24c.11] |
| 10 | 11 KV Stay Set 16x1800 mm [PS. No.24c.26] |
| 11 | Stay Wire 7/10 SWG [PS. No.24c.47] |
| 12 | Earthing Complete [PS. No.24c.24] |
| 13 | X-Arm Holding Clamp [PS. No.24c.5] |
| 14 | Concreting/Grouting of Pole [PS. No.24c.23] |
| 15 | Concreting/ Grouting of Stay [PS. No.24c.21] |
| 16 | F-Bracket for 11 KV Line [PS. No.24c.15] |
| 17 | STONE PAD 300x300x75 MM [PS. No.24c.3] |
| 18 | Clamp with nut and bolt [PS. No.24c.46] |
| 19 | Suspension Clamp [PS. No.24a.7] |
| 20 | Eye-HOOK [PS. No.24a.8] |
| 21 | Cable LT ABC (3x120+1x95+1x16 ) sq.mm [PS. No.24a.23.4] |
| 22 | Cable LT ABC (3x95+1x70+1x16 ) sq.mm [PS. No.24a.23.3] |
| 23 | Cable LT ABC (3x50+1x35+1x16 ) sq.mm [PS. No.24a.23.2] |
| 24 | LT Insulation Piercing Connector [PS. No.24a.10] |
| 25 | Dead End Clamp [PS. No.24c.19] |
| 26 | Danger Board with Clamp,Nut and Bolt [PS. No.24c.20] |
| 27 | BARBED WIRE G.I [PS. No.24c.22] |
| 28 | Extra FOR STAY AT ANGLE LOCATION [PS. No.24c.39] |
| 29 | M.S. NUT and BOLts WASHER etc.(All Size) [PS. No.24c.53] |
| 30 | 3 phase LT Distribution Box [PS. No.24a.6] |
| 31 | 3 Phase DO FUSE SET [PS. No.24c.48] |
| 32 | DROPER CHANNEL 100x50x6 mm(2000 mm) [PS. No.24c.42] |
| 33 | Cross Bracing M.S Angle [PS. No.24a.30] |
| 34 | TOP CHANNEL 100x50x6(2240 MM) [PS. No.24c.41] |
| 35 | EXTRA WITH STAY AT ROAD CROSSING LOCATION [PS. No.24c.40] |
| 36 | TREE CUTTING FOR ROAD SIDE [PS. No.24c.57] |
| 37 | LABOUR CHARGES for Dismentaling of Old line/material and deposit to store including cartage + Erection with T&P + Laying, Testing & commissioning etc. [30% Amount of above work] Please Enable Macros to View BoQ information |