|
| 1 | Taking down chowkhats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 5 | M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified and directed. |
| 6 | All as per item No 05 above but size of frame 125mmx60mm for doors. |
| 7 | S&Ffor 30mm thickflush shutters, solid core construction, with particleboard core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 8 | S&F for 2nd class hard woodglazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads etc complete all as specified and directed. |
| 9 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed. |
| 10 | S&F Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C\"channel having a PVCsheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl3Nos- 100mm Aluminium hinges for each shuttercomplete all as specified and directed . |
| 11 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 12 | M&L for factory made box type steel windows, 16 gauge steel section for frames & shutters, as per TD drawing No.219, sheet 01/03 to 03/03, using ERW hollow \"P\" section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40X4 mm complete including grill of 10 mm square bar, fixed horizontally @ 10 cm centre to centre, pintel hinges 75 mm long 12 mm dia, 100 mm long handle, 150 mm long tower bolts, lugs etc. with/ without cooler provision, complete all as specified and directed. Note :- (i) For purpose of measurement andpayment double shutter with frame including square grill shall be considered as one unit. (ii) Glazing and wire mesh shallbe measured and paid for separately in respective of item. (iii) Item includes cost of double shutter of gauged and glazed shutter with square bar grill. |
| 13 | S&F in repair for factory made Solid WPC Door frame size ( 125mm X 65mm Double Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings including all necessary accessories.The door frame should be Water Proof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed. |
| 14 | S&F in repair for factory madeSolid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawingsincluding all necessary accessories.The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity complete all as specified and directed. |
| 15 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 59-60 (Suspension Grade) ,calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spread of flames of class A category with property of being termite /borer proof,water /moisture proof and fire retardantfixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screw, complete all as specified and directed. |
| 16 | M&L for Factory made solid panel PVC sketlton door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with. heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andSingle Side Prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10mm 900 bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 17 | S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqmquality or description from steel frame complete all as specified and directed. |
| 18 | S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 19 | S & F for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 20 | S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 21 | S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5sqm in each paneincl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed. |
| 22 | S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed. |
| 23 | S&F for aluminum anodized barrel tower bolts of extruded section 150mm long(ISI Marked) complete all as specified and directed. |
| 24 | S&F for aluminum handles cast type anodized 200mm long (ISI Marked) complete all as specified and directed. |
| 25 | S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 26 | S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed. |
| 27 | M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified. |
| 28 | M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed. |
| 29 | M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified and directed. |
| 30 | S&F 125 mm size Hasp and staple, safety type mild steel,wire type,stove enamelled black,including bolt to hinge plate with screws complete all as specified and directed. |
| 31 | S&F in repair 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished complete all as specified and directed. |
| 32 | S&F in repair for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed.Note: the cost of brackets and knobs is deemed to be incl in the quoted rate. |
| 33 | M&L for Glazed ceramic jointless light/coloured group of size 300/350mm x 450/600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match,laid over and including 10mm thick plastering in cement mortar 1:4,incl dismantlingtiles etc complete all as specified and directed.Note : Shade & design as approved by GE. |
| 34 | S&F in repair of door closer hydraulically regulated design No 3, universal type, suitable for door shutters of 851 to 1000m in width and weifht between 61 to 80 kg etc complete all as specified and directed. |
| 35 | S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed. |
| 36 | M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate/Aluminium gate including welding /reveting to bring the steel gate /wicket gate/aluminium gate in service condtions etc complete all as specified and directed. |
| 37 | S&F venition blind for window including necessaryitems requiredfor fix to wall complete all as specified and directed. |
| 38 | S&F in repair 4mm thick figured glass pane fixed in window shutter/ventilators including necessary beading/wooden beading andoil putty complete all as specified and directed. |
| 39 | Supplying, fabricating & fixing in position at all heights above finished ground level exterior grade ACP Sheet 4mm aluminium composite panel cladding (min 2 hr fire-rated) of appvd. Colour, shade and make (panel thickness min 3mm with thermoplastic core and min 0.3 mm thick outer skins) complete with all necessary fittings & fixtures as necessary. Work shall include all materials, tools,plant & labour complete and shall be done as per manufacturer\"s specifications, drawings & complete all as specified and directed. |
| 40 | S&F LED 3D Acrylic letter mounted on ACP Panel including all necessary electrical items required complete all as specified and directed. |
| 41 | S&F anodized aluminium window and ventilator shutters,side hung type without sash bars,aluminium sections weight not less than 0.55 Kg/Rm including jointing cleats aluminium snap beading/screws,anodised aluminium fittings such as peg stays 150mm long (1 Nos),hinges type B-21 100 mm long(2Nos) suitable aluminium handle (1 No)complete all as specified and directed. |
| 42 | S&F Anodised aluminium frame for doors,windows,ventilators with one or more rebated including jointing cleat for fixing etc complete all as specified and directed. |
| 43 | S&F Anodised Aluminium door shutters,aluminium section weighting 0.55Kg/m including necessary joint cleats,glazing clips,ruber neoprene packing,handles 2 Nos in each door,hinges,anodised aluminium snap beading screws etc complete all as specified and directed. |
| 44 | Supply only dry saw dust complete all as specified and directed. |
| 45 | Supply and laying yamuna sand complete all as specified and directed. |
