Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and as directed. |
| 2 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. |
| 3 | Excavation over area not exceeding 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 4 | Excavation over area not exceeding 1.5 m deep and getting out hard/dense soil complete all as specified and directed. |
| 5 | Excavating in post holes(or similar holes ) each n.exc. 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth round in layers n.exc. 25 cm in soft/loose soil complete all as specified & as directed. |
| 6 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep Hard / Dense soil complete all as specified and as directed. |
| 7 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep Soft / Loose soil complete all as specified and as directed. |
| 8 | Returning, filling in including spreading and levelling watering and well remming in layeres n.exc. 25cm thick complete all as specified and directed. |
| 9 | Removal of excavated material [Soil] to a distance exceeding 500m but not exceeding 1.5Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 10 | Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 11 | Material and labour for Rolling and consolidating formation surfaces in cutting by using power road roller of 8 to 12 ton capacity complete all as specified and as directed. |
| 12 | M & L for 150mm thick (compacted thickness ) Granular Sub Base (GSB) of grade I as per table 400-I of MORT&H ,IRC specification laid with mechanical paver ,rolled and compaceted to required gradient and camber with 8 to 10 tonnes power roller and vibratory roller complete as per MORTH specification clause-401 incl all tools and plants etc complete all as specified and as directed by Engineer-In-Charge. |
| 13 | Material and labour for laying and compacting 150mm thick (compacted thickness), Wet Mix Macadam(WMM), laid in two layers of 75mm each grading as per table 400-13of MoRTH specifications for Road and Bridge works 2013, manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor pavor and rolling with vibratory roller of capacity 80KN-100KN static weight and consolidating to required gradient and camber complete all as specified and as directed.Note- The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge Works 2013. |
| 14 | Preparing WMM surface by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned cleaned surface with gunny bags to remove all loose dirt etc by cleaning the WBM/WMM surface with power compressor and applying evenly priming/tack coat with bituminuos primer of VG-10 grade paving bitumen @ 7.50 kg/X Sqm complete all as specified and as directed by Engineer-In-Charge. |
| 15 | Material and labour for premix bituminous macadam (using paving bitumen VG-30)laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), rolled with 8 to 12 tonne power roller complete all as specified and as directed.Note :-Binder content, paving bitumen VG-30 shall be @ 4.5% by weight of total mix. All materials are prepared by hot mix plant. |
| 16 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 2.5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 17 | Material & Labour for laying Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver finisher, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified.Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix–Design. Bitumen shall be Paving Bitumen of Grade VG–30 and shall be procured by the contractor. Mix-Design shall be approved by GE. |
| 18 | Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. |
| 19 | M & L for Continuous brick edging with burnt clay bricks of sub class B, with width equal to the depth of the brick, laid dry on end at the required angle complete all as specified and as directed. |
| 20 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringas directed. |
| 21 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 22 | Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 23 | Material and labour for cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) as in surface channel complete all as specified and directed. |
| 24 | Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 25 | Material and labourfor Plain cement concrete Type C-2 unsing40mm graded stone aggregate) a walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)complete all as specified and as directed. |
| 26 | Material & labour for Plaincement concrete Type B0 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate cast in situ in lintels up to 1.5m span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed. |
| 27 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 28 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 29 | Material and labour broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 30 | Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 31 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 32 | Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed. |
| 33 | Material and labour for Reinforced cement concrete (design mix) in M-25, (20 mm graded aggregate) in columns/pillars complete all as specified and as directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 34 | Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shapewith rough finished surfaces of concretecomplete all as specified and as directed. |
| 35 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 36 | Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc.; rough finished surfaces of concrete, flat complete all as specified and as directed. |
| 37 | Supply & Fixing Reinforcement usingTMT steel bars, 10mm dia and over, cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 38 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 39 | M & L for Mild steel TMT bars 5mmdia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 40 | Material and labour for Polythene film, black, 50micron laid in floors complete all as specified and directed. |
| 41 | Material and labourfor 75mm thick cement concrete 1:4:8 type D2 (40mm graded aggreded) as in sub base, finish the surface even and rough to receive topping layercomplete all as specified and as directed. |
| 42 | Material and labourfor 40mm thick cement concrete 1:1.5:3 type B1 (20mm graded aggreded) as on top surfaces finish even and smooth without using extra cement complete all as specified and as directed. |
| 43 | S & F Glass dividing strips, 3 mm thick and 38mm wide, inserted in position, conform to design complete all as specified and as directed. |
| 44 | Material and labour for 15mm thick rendering in CM (1:4) onbrick work or concrete surface as on wall,finished the surface even and faircomplete all as specified and directed. |
| 45 | Materials and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.completeall as specified and as directed. |
| 46 | Material and labour for 15mm thick rendering in CM (1:4) onbrick work or concrete surface as on wall in two separate coat (10mm thick backing coat and 5mm thick as finishing coat mixed with integral water proofing compound @ 2% by wt of cement,finished the surface even and faircomplete all as specified and directed.(Note:Water proofing compound shall be measured & paid separately) |
| 47 | Material and labourfor rendering 10 mm thick in CM 1:6 on fair faces of Brick masonry/Concrete surface finished even and smooth without using extra cement all as specified and directed. |
| 48 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) completeall as specified and as directed. |
| 49 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed. |
| 50 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of colour wash complete all as specified and as directed. |
| 51 | Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Fe-410-W (Gde E-250) quality- Acomplete all as specified andas directed. |
| 52 | Supply and fixing of Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 53 | Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- Bcomplete all as specified andas directed. |
| 54 | Supply & Fixing N exc 4 kg Welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 55 | Supply and fixing Mild Steel work as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embedding in concrete and screwing etc., Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bendingto shape, notching for wire, drilling holes or as in flat iron fillets [forsecuring wire mesh and barbed wire etc.] including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 56 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 57 | S & F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 58 | Supply and fixing 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 59 | Supply and fixing 125 mm long, Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. |
| 60 | Supply and fixing 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 61 | Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 62 | Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ascomplete all as specified and as directed. |
| 63 | Material and labour for Forming Contraction Joint [Dummy], 65mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade \"A\" complete all as specified and directed. |
| 64 | Material and labour for Forming 12mm thick Expansion joints filledwithpre-formed bituminous filler 30mm primed and sealed with sealing com pound, Grade ‘A complete all as specified and directed. |
| 65 | Material and labour for Spike rolling to surfaces or making impressions of expanded metal, whilst theconcrete is green complete all as specified and as directed. |
| 66 | Material and labourfor 100mm thick cement concrete 1:4:8 type D2 (40mm graded aggreded) as in sub base, finish the surface even and rough to receive top surfacecomplete all as specified and as directed. |
| 67 | Material and labourfor 100mm thick cement concrete 1:2:4 type B1 (20mm graded aggreded) as in hard standing, finish the surface even and faircomplete all as specified and as directed. |
| 68 | Material and labourfor 75mm thick cement concrete 1:3:6 type C2 (40mm graded aggreded) as in plinth protection, finish the surface even and faircomplete all as specified and as directed. |
| 69 | M & L for brick work in half brick thick walls with sub class `B` bricks, old size straight or curved on plan to any radius built in Cement Mortar 1:4complete all as specified and as directed. |
| 70 | Material & Labour for 25 mm thick PCC 1:2:4, Type B-0 using 12.5mm graded aggregate as in sub base of flooring, surface finished even and rough to receive topping layer complete all as specified and as directed. |
| 71 | Material & Labour for joint free non skid ceramic coloured tiles7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding .06 sqm but not exc 0.11sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 72 | Material & Labour for joint free glazed ceramic coloured tiles 450 x 300 x 7 mm thick of premium quality on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 73 | S & F of Turbo Ventilator (type:wind driven)made with material of stainless steel(grade 304) dia 400-500mm throat size bearing with double sealed high-quality ball bearing for smooth and silent operation incl corrosion /UV resistant and suitable for sheets, including baseplate matching with existing galvalume roofing sheet profile and flashing and proper flashing with water proofing to ensure leakproof and ventilator rotates freely after installation as per manufacturer instruction, complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed. |
| 75 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C\" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed.. |
| 76 | Supply and fixing looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. |
| 77 | S & FVitreous China WareWash Hand Basin with pedestal, White, Flat Back of size 610 mm X 480 mm x 195 mm, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc.complete all as specified and as directed. |
| 78 | Supply and fixing pillar taps 15mm dia bore fancy typewith capstain heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed. |
| 79 | Supply and fixing Vitreous China Wash Down Water Closet [Pedestal pattern], Ivory colour including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and \"P\" or \"S\" trap including making good the disturbed floor complete all as specified and as directed. |
| 80 | S & F ofHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed. |
| 81 | Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply and fixing 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 83 | Supply and fixing 15 mm dia Bib Taps with wall flange and areater, brass Chromium Plated, Fancy Type and screwed down toiron pipe or brass ferrule complete all as specified and as directed. |
| 84 | Supply and fixing 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed. |
| 85 | Supply and fixingPVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 86 | Supply & Fixing Towel rail, 20mm dia brass chromium plated, 600mm long with brass chromium plated brackets on both sides and fixed with steel screws, wooden rawl plugs complete all as specified and as directed. |
| 87 | Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including fixing arrangementcomplete all as specified and as directed. |
| 88 | Supply and fixing Vitreous China soap tray embedded in the wall all as specified and as directed. |
| 89 | Supply and fixing of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified. |
| 90 | Supply and fixing 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors /wallcomplete all as specified and as directed. |
| 91 | Supply and fixing PVC (SWR) vent cowl of 110mm dia including jointing with solvent cement complete all as specified and as directed. |
| 92 | Supply and fixing PVC (SWR) bends any radius, 110mm bore including jointing with solvent cement complete all as specified and as directed. |
| 93 | Supply and fixing75 mm dia PVC (SWR) floor trap, plain with grating including jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1, diameter of outlet pipe 75mm complete all as specified and as directed. |
| 94 | Supply & FixingGI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 95 | Supply & FixingGI water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 96 | Supply & FixingGI water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 97 | Supply & FixingGI water tubing of 40 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 98 | Supply & fixing gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 99 | Supply & fixing gun metal gate valve 25mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 100 | Supply & fixing gun metal gate valve 40mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 101 | M & L for boring of existing DI line 150mm and taking down steel tubing 40/50 mm dia connection for tapping to 40mm GI line for alteration/addition doen in position complete all as specified and directed. |
| 102 | Supply and fixing Three layered Rotational Moulded Polythene [HDPE] Water Tanks, ISI Marked, Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 50 dia and 200 mm long spouts for connecting inlet, outlet, over flow and washout pipes including Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] etc. complete all as specified and as directed. |
| 103 | Material and labour for Cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 104 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessoriesand PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. |
| 105 | All as per item No 104 above but for 3 pin 5 Amp socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 106 | All as per item No 104 above but for 3 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 107 | All as per item No 104 above but with FRLS stranded copper conductor 4.0 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent board, including FRLS PVC insulated stranded copper conductor 4.0 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 108 | Supply and fixing modular switch, 1 way, 6 A, 1 module complete all as specified and as directed. |
| 109 | Supply and fixing modular switch, 1 way, 16 A, 1 module complete all as specified and as directed. |
| 110 | Supply and fixing modular socket,6 A, 2/3 pin, 2 module complete all as specified and as directed. |
| 111 | Supply and fixing modular socket,6 / 16 A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 112 | Supply and fix ceiling rose surface Isolated body, 240 V, ISI marked Polycarbonate/ PVC three terminal complete all as specified and as directed. |
| 113 | Supply & Fixing Surface & wall mounted Energy efficient LED Tube Light Fitting of 20 watt, 4 feet long,5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mmcomplete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 114 | Supply & Fixing Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5%including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account. |
| 115 | Supply & Fixing Energy efficient & Long life Building Security Light Luminaire, of 35 watt, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 25 mm bore GI Tube, Medium Grade of size not exceeding 1.20 m in length and bent to shape required and fixed including drilling in wall of required hole with 2 Nos of wall fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 116 | Supply and fixing of MCB DB TPN 4 ways, powder coated, double door, 415 Volts,including bus bar neutral link, earth bar and din rail,for fixing MCB of various rating complete all as specified and as directed. |
| 117 | S & F MCB DB, VTPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar with neutral link and earth bar suitable for mounting MCBs/MCCBscomplete all as specified and as directed. |
| 118 | Supply & Fixing of MCCB FP of capacity 125 Amps,415 V, 35 KA complete all as specified and directed. |
| 119 | Supply & Fixing of MCB SPN of capacity 32 Amps,240 V, 10 KA \"B\" curve complete all as specified and as directed. |
| 120 | Supply & Fixing of MCB TPN of capacity 40-63 Amps,415 V, 10 KA \"B\" curve complete all as specified and as directed. |
| 121 | Supply & Fixing of MCCB FP of capacity 100 Amps,415 V, 16 KAcomplete all as specified and as directed.Note for serial Item No. 116 to 121: MCB, MCCB, MCB DB and VTPN DB shall be of same make as approved by GE. |
| 122 | Material & Labour for sub main wiringwith four single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVCCasing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly complete all as specified as directed. Note : (i) 5 Runs of 10.0 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length. |
| 123 | Material and labour for well burnt subclass \"B\" bricks laid flat width wise along the length of cable for cable protection complete all as specified and as directed. |
| 124 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cableincludingspreading and punning down to desired thickness complete all as specified and as directed.(Note: Punned thickness shall be measured for payment purpose) |
| 125 | M & L for 15 mtr High galvanized mast light suitable for 6 to 9 lantern symmetrically fitted alongwith their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height complete all as specified and as directed. |
| 126 | M & L Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mmcomplete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 127 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 70 sqmm 3.50 corelaid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work, brick protection, sand cushioning etc will be measured and paid separately |
| 128 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 sqmm 4.0 corelaid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work, brick protection, sand cushioning etc will be measured and paid separately |
| 129 | Supply, installation, testing and commissioning of 3 in 1 system to handle Plastic, Tin, and tetra pack, waste compaction and bailing system of capacity 100 Kg/Hr, Vertical operated ,15 MT capacity , bail size = 600 mm X 850 mm, Bail Weight - 100 kg , Motor - 4.5 HP , 3 phase 415 V 50 Hz AC power complete as per manufacturer instruction and as directed by Engineer-in-Charge. |
| 130 | Supply, installation, testing and commissioning of Shredder Machine of capacity 50 Kg/Hr complete as per manufacturer instruction and as directed by Engineer-in-Charge. |
| 131 | Supply, installation, testing and commissioning of waste incinerator, electrically operated, 3 Phase, 415 Volt with outer body MS powder coated, Burner 316 stainless steel of capacity 250-300 Kg/Hr complete as per manufacturer instruction and as directed by Engineer-in-Charge. |
| 132 | Supply installation and commissioning of automatic organic waste convertor machine (AOWC) of 1500-1550 Kg of size 18.5x6x7(ft). Food waste shredder of capacity 200 Kg/hr, of size 3.5x2x3.5(ft), Dewatering Screw Press 3 HP, and screw conveyor of 200 Kg/hrs SS 304 feeding conveyor of size 11 ft 4 x 2 ft B x15 ft L including 3 HP VFD gear motor, External shredder motor 3 HP and compositing motor 15 HPincluding accessories of following specifications. |
| 133 | (a) The AOWC machine should be built as a heavy duty industrial grade automatic organic waste convertor. Fully automatic operation (Minimum manpower required), outputVolume Reduction 80-90%, Power rating : 18-20 KW, 3 phase, Voltage : 440/50 Hz, Outer body : MS powder coating. The processing inner tank must be made of SS-304 material. The outer body is made up of Mild steel powder coated. Main motor of the AOWC machine is min 15 HP. Exhaust blower motor is 1 HP. The machine should be easily accessible and can be opened from all the sides with a single key. AOWC machines should be provided with indirect heating system (Oil bath heating system). In case of heater failures the in built redundancy/ heaters must be supplied. The redundancy/ slave heaters come on in case of the mainheater failure. Cont... |
| 134 | Resulting in abetter uptime Thermophilic and mesophilic bacteria must be developed in OEM certified NABL Accredited Lab to enhance decomposition process and quality of the soil enricher. The developedmicrobial cultures should be validated by any govt recognized and provide certificate for the same. Manufacturer should have certifications from NABL (National Accreditation Board for Testing and Calibration Laboratories) and ISO 90001-2015 and is verified by CRISL, (Credit rating information services of India Ltd).(b) Food Waste Shredder : Type Jaw type, feed opening – stainless steel SS 304 hopper, Blade type- Stainless steel, Motor- min 3 HP, Outer body – MS powder coated, Dimension minimum 3.5 ft (L)* 2 ft (W)* 3.5 ft (H) (+ 0.5 ft), Safety feature- Overload protection and forward reverse function, No of shafts-Dual and Capacity – 200 Kg per hour. Cont... |
| 135 | (c) Dewaterer : Type- Screw press, Motor-min 3 HP with overload protection , Input – Motorized continuous feed type and water flow line feeding capacity suitable to handle 200Kg/hrs, outer body feed box fricated from M.S Press casting –Conical design shape, Discharge control C.I.M.O.C adjusting cone, Screw Fabricated from S.S 304 MOC plate on M.S Shaft, Base frame – Fabricated with M.S.(d) Screw Conveyor : Motor – min 3 HP suitable to handle 200 Kg/hrs and Inclined type.(e) Feeding conveyor made of SS grade 304of size 11ft(H) x 2 ft (B) x 15 ft (with 3 HP VFD gear motor.Notes: (a) Cost of copper wiring with PVC conduit of suitable size from MCB DB to the euipment shall have deemed to be including in the rate quoted by the contractor. (b) Installation and demo of machine shall be carreid out by OEM rep. |
| 136 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion complete all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
| 137 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
