|
| 1 | Dismantling Fountain rockery arrangement in the proposed CSC portion including disposal of the unserviceable materials, etc., complete as per the directions of the Engineer-in-Charge. |
| 2 | Removing the damaged laminated sheets from the wall panelling including disposal of the unserviceable materials, etc., complete as per the directions of the Engineer-in-Charge. |
| 3 | Removing the plywood covering available around the column disposal of the unserviceable materials, etc., complete as per the directions of the Engineer-in-Charge. |
| 4 | Dismantling wooden panelling (including laminations and wood work wherever available ) in lining of walls and partitions for window opening (5.25x1.35m & 1.50x 1.35m size),including stacking within 50metres leadas directed by the engineer in charge. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 6 | a) For thickness of tiles 10 mm to 25 mm |
| 7 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 8 | a) For door/ window/ clerestory window. |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 10 | a) In cement mortar |
| 11 | Dismantling aluminium partitions (ANG/ partiton boards) in partions including doors, windows and fixed glazing incuding disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 12 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 13 | a) Of area beyond 3 sq. metres |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 15 | a) All kinds of soil. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 17 | a) 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in foundation and plinth in: |
| 19 | a) Cement mortar 1:6 (1 cement : 6 M Sand) |
| 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation .5 in superstructure above plinth level up to floor V level. |
| 21 | a) Cement mortar 1:4 (1 cement :4 M Sand) |
| 22 | 12 mm cement plaster of mix : |
| 23 | a) 1:6 (1 cement: 6 Stone Dust) |
| 24 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 25 | a) 1:6 (1 cement: 6 Stone Dust) |
| 26 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ). |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 28 | a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 29 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 30 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 31 | a) 30 mm thick plain PVC door shutters. |
| 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 33 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 34 | a) 250x16 mm |
| 35 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 36 | a) 150x10 mm |
| 37 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 38 | a) 100 mm |
| 39 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 40 | a) 1.00 mm thick |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 42 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 43 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 44 | 40 mm thick with 20 mm nominal size stone aggregate |
| 45 | Providing and fixing polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacture like Fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 kg all completeas directed by the Engineer-in-charge in approved colour and shade. a) 2.00 mm thick |
| 46 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 47 | a) 75 mm diameter |
| 48 | b) 110 mm diameter |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 50 | (a) Single tee without door.(i) 75x75x75mm |
| 51 | (II) 110x110x110 mm |
| 52 | (b). Bend 87.5°, (i) 75 mm bend. |
| 53 | (II) 110 mm bend |
| 54 | (c). Single tee with door. (i). 75x75x75 mm |
| 55 | (II) 110x110x110 mm |
| 56 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 57 | a) Two or more coats on new work. |
| 58 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 59 | a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 60 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 62 | a) W.C. pan with ISI marked white solid plastic seat and lid |
| 63 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 64 | a) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 65 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 66 | a) Flexible pipe. (i) 32 mm dia. |
| 67 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 68 | a) Rectangular shape 453x357 mm |
| 69 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 70 | a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 71 | Providing and fixing Health Faucets in western style toilets with necessary screws, rawl plugs, etc., complete as directed by the Engineer-in-Charge. |
| 72 | Providing and fixing PVC floor trap of approved design as directed by the Engineer-in-Charge. |
| 73 | a) 100mm inlet and 75mm outlet(Single Way) |
| 74 | Providing and fixing PVC floor trap of approved design as directed by the Engineer-in-Charge. |
| 75 | a) 100mm inlet and 50mm outlet (Multi Way) |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 77 | a) 20 mm nominal outer dia. Pipes. |
| 78 | b) 25 mm nominal outer dia .Pipes. |
| 79 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 80 | a) 15 mm nominal bore |
| 81 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 82 | a) 15mm nominal bore |
| 83 | Providing and fixing PTMT grating of approved quality and colour. |
| 84 | I) Circular type. (a) 100 mm nominal dia. |
| 85 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 86 | 15 mm nominal bore with 45 cm length. |
| 87 | Fixing aluminium partitions with available aluminium sections, prelaminated particle board / aluminium grill or glass panes etc., including providing new necessary screws, rubber gasket, cleats and including carriage of materials from Staff Quarters at Dubba as per the directions of the Engineer-in-charge. |
| 88 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 89 | I). For fixed portion. A)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 90 | I).For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).A) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 91 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. |
| 92 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 93 | Providing and fixing toughened glass of 12mm thick for doors including rounding of edges mirror polished etc. compete as per the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 94 | Providing and fixing 8 mm thick Cement bonded wood particle board conforming to IS:14276-1995, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 95 | Dismantling of modular work stations along with storage units, key board trays, chairs available in single and multi seated stations (2/4) without any damages including numbering clearly so as to reassemble same whenever required and stacking the same in the First Floor of old Cash Counter building in the CTO Compound, Trichy etc., complete as directed by Engineer in charge. |
| 96 | a) Size (6050 mm x 1580 mm x1350mm) |
| 97 | b) Size (5250 mm x 1580 mm x1350mm) |
| 98 | c) Size (4570 mm x 1580 mm x1350mm) |
| 99 | d) Size (2950 mm x 1580 mm x1350mm) |
| 100 | Refixing the dismantled availablemodular work stations along with storage units, key board trays, chairs in single and multi seated stations (2/4) as per site conditions and requirements as directed by Engineer in charge. |
| 101 | a) Size (6050 mm x 1580 mm x1350mm) |
| 102 | b) Size (4570 mm x 1580 mm x1350mm) |
| 103 | c) Size (2950 mm x 1580 mm x1350mm) |
| 104 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 105 | a) With stainless steel cover plate minimum 1.25 mm thickness. |
