|
| 1 | Dismantiling of 8\" thick hollow block masonry in cement mortar |
| 2 | Dismantling concrete Cement concrete plain 1:3:6 mix |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work isnot involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.. |
| 4 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 5 | Cement concrete 1:5:10 with 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 6 | Random rubble masonry or polygonal rubble masonry (Kentish Rag) or random or polygonal rubble built to courses in foundations and plinth in cement mortar 1:6 |
| 7 | Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. |
| 8 | Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type |
| 9 | Cement concrete 1:2:4 a)With stone ballast or shingle ii) mixing by mechanical means using concrete mixer volumetric type |
| 10 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 11 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 12 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position |
| 13 | 20mm thick cement plaster 1:4 in two coat work |
| 14 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 15 | Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 16 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades wood work, metallic or plastered concrete surface to give an even shade |
| 17 | Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M-40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge. |
| 18 | Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours. |
| 19 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 20 | Scraping White wash and colour wash |
| 21 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm |
| 22 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 meter openable length (total length 30m) having 50 nos. rounds per 6 meter , up to 3m height of wall with existing angle iron Y Shaped placed 2.4m or 3m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.I clips to retain horizontal including necessary bolts or G.I. Barbed wire tied angle iron , akk complete as per direction of Engineer -in-charge, with reinforced barbed tape (R.B.T)/ Spring core (2.5mmthick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick ) and weight 43.478 gm/meter |
| 23 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed |
| 24 | R.C.C. M-20 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 25 | Cold twisted detormed (Ribbed/ Tor steel)Bars Fe550 grade as per IS1786-2008),for R.C.C works,where notincluding in the complete rate of RCC including binding, bending and placing in position complete |
| 26 | Steel work in built up tubular (round, square orrectangular hollow tubes etc. ISI Marked) trussesetc., including cutting, hoisting, fixing in positionand applying a priming coat of approved steelprimer, including welding and bolted with specialshaped washers etc. complete having span: Up to 15.00 Mtr. Span |
| 27 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position |
