|
| 1 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as reqd. |
| 2 | Providing and laying earth connection from earth eletrode with 6 SWG dia G.I. wire in 15mm dia G,I, pipe from earth electrode including connection with G.I. thimble excavation and re-filling as reqd. |
| 3 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd. |
| 4 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 Grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 5 | Upto 35 sq mm |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as reqd. |
| 7 | 4x16 sq mm |
| 8 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 9 | 4 way (4 + 12), Double door |
| 10 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 11 | Single pole |
| 12 | Triple pole and neutral |
| 13 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 14 | 63 amps |
| 15 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.. |
| 16 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 17 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 18 | 100 A, 16 KA,TPMCCB |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 20 | Group C |
| 21 | Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing and fixing6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modularswitch, connections etc. as required. |
| 22 | Supply, Installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 1xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100lm |
| 23 | Supply, Installation, testing and commissioning of pre-wired, 70 watt, Street Light luminaire delivering >100 lumen/watt with PDC housing, 220-240 V, 50 Hzon existig street light pole/wall including all accessories and connection etc.as required. Make Philips, Cat No. BRP032 P LED75 CW SLR PSU GR SPD or equivalent model of Thorn/Trilux |
| 24 | Supplying of one number PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1kV grade of size 4 x16 sqmm etc as required |
| 25 | Supplying of one number PVC insulated and PVC sheathed/XLPE copper conductor un armoured power cable of 650/1100 kV grade of size 3C x 2.5sqmm etc as required |
| 26 | Supply, installation, testing and commissioning of pre-wired, 150 watt, street light delievering 120 lumens/watt, IP 66 protection, PDC housing and high impact resistance (IK07) glass cover lumimiare 220-220V, 50 hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent Model of Thorn/Trilux) |
| 27 | Supply, Testing and commissioning of foolowing size HOT dip galvanized octagonal steel pole made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thickto accommodate the fittingon existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes(a) 6mm thick pheenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door( b) S/F of Teriminalblock suitable for 16 sq. mm conductor4 Nos. & shorting links - 5 Nos. on DIN Chneels(c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA \"C\" Series - 1 No. i/c mounting on DIN Channel. This includes making of foundation of size 1200 mm x 400mm x400mm made of cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 40 mm nominal size) with provision of IN and OUT slot for cable entry including excavation of and refilling etc. as required(Make : Bajaj/ Transrail/Jindal/Tata) |
| 28 | 3 Meter height |
| 29 | 5 Meter height |
| 30 | Supplying and Fixing of 500 mm longOver hang single arm bracket made of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole including Nut bolts etc. as required. (Make : Bajaj/ Paruthi/ Surya) |
| 31 | Double Arm Bracket |
| 32 | Single Arm Bracket |
