|
| 1 | Dismantling tile work in floors and roofs laid in cement mortarincluding stacking of serviceable material and disposal ofunserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm. |
| 2 | Dismantling old plaster or skirting, raking out joints andcleaning the surface for plaster including disposal of rubbishto the dumping ground within 50 meter lead. |
| 3 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). |
| 4 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to code IS : 15622 of size 200mm x300mm in walls, floors, steps, pillars etc. laid on a bed of neatcement slurry finished with flush pointing in the white cementmixed with pigment to match the shade of the tile complete(excluding the cost of cement plaster on walls and pillar). |
| 5 | Providing and fixing 1st quality MAT finished ceremic tilesize 300x300mm confirming to code IS : 15622 colour suchas white, grey, ivory, fume red brown, light green, light blueand other light shades in floors, steps, pillars etc. laid on a bedof neat cement slurry finished with flush pointing in the whitecement mixed with pigment to match the shade of the tilecomplete (including the cost of cement mortar bed 1:4). |
| 6 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer. |
| 7 | Providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm.long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts asrequired including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. asrequired : Door |
| 8 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance |
| 9 | Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint |
| 10 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish : 20mm. Thick. |
| 11 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea 2.5 sq. metres and under including cutting the patch inproper shape, raking out joints and preparing and plasteringthe surface of the walls complete including disposal of rubbishto the dumping ground within 50 m lead With cement mortar1 :4 ( 1 cement : 4 coarse sand) |
| 12 | Repair of existing steel glazed doors, windows and ventilator,MS sheet door, garge doors, compound wall gates etc. bywelding drilling complete include. Cost of welding rods andhire charge of welding meachine and TP etc complete |
| 13 | Labour charges for removing W.C. pan (any type) of all sizeswith care including all necessary fittings P or S trap. |
| 14 | P & F Indian type white glazed vitreous china 1st quality W.C.orissa pan (IS :2556 Mark) with 100 mm vitreous china P or Strap including cutting and making good the wall and floor: size. 580 x 440 mm |
| 15 | P & F European type white glazed vitreous china 1st qualityW.C pan (IS : 2556 Mark) with P or S trap including cuttingand making good the wall and floor |
| 16 | P & F Low level Flushing Cistern of 10 litres capacity (IS :2556 mark) of approved make with complete fittings C.I.brackets duly painted, brass ball cock with ball (IS: 1703mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231 . |
| 17 | P & F water closet Seat Covers with brass hinges complete :1.7.1 Solid PVC (IS 2548 marked) grade-I Black for EWC. |
| 18 | P & F Grating of approved quality/make:1.48.1 Stainless Steel Sheet size 125mm dia. |
| 19 | P & F Bib Cock (IS : 8931 Mark), Superior quality ofapproved make:2.7.1 Brass 400 gm,15mm nominal bore. |
| 20 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes Type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make 110 mm |
| 21 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes fittings type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make 110 mm bend 87.5 Dg |
| 22 | Door Bend 87.5 Dg |
| 23 | Single tee 110 mm dia |
| 24 | Nahni trap with jali 4\" 110 mm dia |
| 25 | Construction of chamber in all type of soil with 300 mm thickmasonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation,20mm thick insider plaster in Cm 1:6, finished with floatingneat cement, 50mm thick M-15 grade C.C. flooring ,earthwork etc. complete as per design including disposal ofsurplus earth within a lead of 50 mtr. |
| 26 | Construction of manhole in all type of soil inner size 90 X 60Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cementconcrete 1:5:10 in foundation, 20 mm thick inside plaster inCM 1:6, finished with floating neat cement, 50mm thick M-15grade C.C. flooring, making channels, 80mm thick stone slabcovering with 40mm thick M-15 grade C.C. flooring, Cementcover with frame of 450mm dia, earthwork etc. complete asper design including disposal of surplus earth within 50 mtr.lead. lead depth upto 0.5 mtr |
| 27 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding: old work |
| 28 | P & F Flush Cock / Flush Valve (IS : 9758Mark) for WC of approved quality make 25 mm |
| 29 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicatingthe BIS license No), of approved make with cover, 25mm dia1M long G.I. over-flow pipe & 25 Cm. long wash out pipewith plug & socket, including making connection etc.,complete of approved design 500 ltr. |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 25 mm dia Please Enable Macros to View BoQ information |
