Tender For Construction Of New Madapalli And Colour Finish Aluminium Alloy Roofing Shed At Sri Mazhai Mariyamman Temple, Keezhavur Village Belongs To Sri Dharbaranyeswaraswamy Devasthanam, Thirunallar
Tender Value
11.18 Lakhs
Estimated cost
Bid Submission
19 Feb 2026
0 days left
EMD
23760
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thirunallar → Puducherry
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Madapalli And Colour Finish Aluminium Alloy Roofing Shed At Sri Mazhai Mariyamman Temple, Keezhavur Village Belongs To Sri Dharbaranyeswaraswamy Devasthanam, Thirunallar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and all lift |
| 4 | Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:4:8 (1 cement:4coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacture\"s specification. |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth level :1:1.5:3 (1 cement : 1 .5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforce ment:1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15degree landings, balconies, shelves, chajjas, lintel , bands, plain window sill , staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering ,shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 10 | Centering and shuttering including strutting , propping etc and removal of form for - Lintels, beams, plinth beams, girders, bressumers and catilevers |
| 11 | Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts.- Using steel sheet with M.S.frames |
| 12 | Steel reinforcement for R.C.C.work including straightening, cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse aggregate) |
| 14 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 fine aggregate) |
| 15 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately , all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Vengai wood - 35mm thick shutters |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood |
| 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood |
| 20 | Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc |
| 21 | Providing 40 X 5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 300 x100 x 150 mm 1:3:6 mix (1 cement : 3 fine aggregate : 6 graded stone aggregate 20mm nominal size) |
| 22 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125 X 70 X 4 mm (ordinary type) |
| 23 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 100 X 70 X 4 mm (ordinary type) |
| 24 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 250 x 10 mm |
| 25 | Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm |
| 26 | Providing and fixing aluminium tower bolts , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade, with necessary screws etc. complete - 150 x10 mm |
| 27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete - 125 mm |
| 28 | Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting , hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes |
| 29 | 52 mm thick cement concrete flooring with concrete hardener topping , under layers 40mm thick cement concrete 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume,hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer\"s specification . This includes cost of cement slurry, but excluding the cost of nosing of steps etc.complete |
| 30 | Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling / tapping stainless steel screws M6, 50mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per direction of Engineer-in-charges.(Cost of truss/ frame work shall be paid separately) - 0.56mm, aluminium Colour coated troughed profile with center to center pitch of 200mm, depth of 32mm, overall profile width 1092 mm, cover width 1000mm. |
| 31 | 12mm cement plaster of mix -1:6 ( 1 cement : 6 fine sand) |
| 32 | 15mm cement plaster on the rough side of single or half brick wall of mix - 1:6 (1cement : 6 fine aggregate) |
| 33 | 6mm cement plaster of mix 1:3 (1 cement : 3fine sand). |
| 34 | Finishing walls with ready mixed Premium acrylic emulsion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali& fungal resistance , dire resistance exterior paint of required shade with silicon additives- New work (Two or more coats applied @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm. |
| 35 | Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
AI Tender Summary
Tender Timeline
Feb 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender