|
| 1 | Excavation in trenches n . exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil deep and getting out inany type of soil. |
| 2 | Surface excavation n. exc 30cm deep and getting out in hard dense soil. |
| 3 | Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25 cm complete all as specified and as directed. |
| 4 | Removing excavated material n. exc 50 Mtr and depositing, where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and as directed. |
| 5 | M&L for PCC 1:4:8 type D-2 using 40mm stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 6 | M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 completeall as specified and as directed. |
| 7 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor.Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing. |
| 8 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing. |
| 9 | M&L renderig 10mm thick in cementmortar 1:6 overfair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement |
| 10 | M&L renderig 10+ 5 mm thick in cementmortar 1:4 overfair faces of of brick or concrete surface of wall rendering, second layer of 5mm thick using WPC is to be finished even and smooth without using extra cement |
| 11 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 12 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface |
| 13 | M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 14 | Supply only water proofing compound complete all as specified and as directed. |
| 15 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of walls. |
| 16 | M & L for preparation of new plastered surfaceandapplying two coat ofoil bound distemper on walls over a coat of 1mm thick putty complete all as specified and as directed. |
| 17 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4,etc complete. |
| 18 | M&L for glazedcoloured ceramic tiles 300 x 600 x 10 mm (Digital/printed tile) thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete. |
| 19 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches. |
| 20 | S&F PVC (SWR) bends 110mm bore of any radious. |
| 21 | S&F PVC (SWR) junction single ,(single T) equal or unequal 110mm bore. |
| 22 | S&F PVC(SWR) vent cowl 110mm. |
| 23 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches. |
| 24 | S&F 75mm bore CI floor trap. |
| 25 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 26 | S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texturewith density not less than 650 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 28 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fireresistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 29 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand andmanufacture, made with fire - retardant gradeunsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 30 | M&L 125mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 31 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete. |
| 32 | S&F aluminum handles cast type anodized 150 mm size etc complete. |
| 33 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 34 | M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete. |
| 35 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 37 | M&L reinforcement cement concrete type B1 (1:2:4) using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span. |
| 38 | M&L formwork to sides and soffit of roof beams ,lintel level shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified. |
| 39 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 40 | S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacersand binders |
| 41 | M&L Reinforcement cement concrete M-25 ( Design mix)as inSlabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 42 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, ladings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete ( flat ) complete all as specified and directed. |
| 43 | S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 44 | S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 45 | S&F 20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete. |
| 46 | S&F vitreous china squatting pan \"ORISSA PATTERN \" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 47 | S & F in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC). |
| 48 | S & F in repairs wash hand basins, vitreous china( oval type) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting standincluding waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified. |
| 49 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 50 | S&F 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 51 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete. |
| 52 | S&F 15 mm bore angle stop cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 53 | S & F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends fancy type chromium plated concealed for iron pipe or for unions and fixed complete all as specified and directed. |
| 54 | S&F 15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete. |
| 55 | S & Fpillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. |
| 56 | S&F towel rail 450mm long of PTMT fixed with an dincluding cromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms) complete no specified. |
| 57 | S&F Soap dish any type , fixed to plugs with chromium plated brass screwes. |
| 58 | S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified |
| 59 | S&F Roof trusses (framed),tubuler trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (tubes, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 |
| 60 | S&Ffor mild steelplates , plain , of any thickness square cur or notched including forming holesas required at site and including welding if required and as directed. |
| 61 | S&F Mild steel screw bolts (machine made) with hexagonal at one end and screwed the other and grouting in PCC block including nut and washers etc complete and as directed. |
| 62 | Supplying, laying, jointing and testing HDPE colour coated double wall corrugated sewer pipe laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed for 200mm internal dia of pipe. |
| 63 | M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 200mm internal dia of pipe. |
| 64 | M & L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and as directed. |
| 65 | M&L precastre-inforced CementConcrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed |
| 66 | Excavation over areasnot exceeding 1.5M depth and getting out in Hard/ dense soil all as specified. |
| 67 | Excavation over areas exceeding 1.5M depth and getting out in Hard/ dense soil all as specified. |
| 68 | M and L for selecting brick bats, suitable for excavated spoil heaps, removing and piling in convenient places within 50m of spoil heaps, et. And raising or lowering to required level (measured after selection) |
| 69 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed uard bars; barred iron doors; ladders; ramed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 70 | M&L 100 mm dia, Cast iron soil, sand cast waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors all as specified. |
| 71 | M and L for 100mm dia, Cast iron cowls |
| 72 | M&L Burnt Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 as in manhole and septic tank etc |
| 73 | S&F 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union. |
| 74 | S&F 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 75 | M&L Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) |
| 76 | S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 77 | M & L granite (of any type and any colour) work (table rubbed & polished), 15 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over M & L 15mm thick screed bed or bedding layer in CM1:6 for laying floor finish. |
| 78 | S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 79 | S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge |
| 80 | M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed. |
| 81 | S&F Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 82 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 83 | S&F 32mm dia UPVC Low density polyethylene (LDPE) waste pipes of pressure rating 6 kgf/sq. cm |
| 84 | Supply and fixhand shower (health faucet) (ABS Chrome palted)with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge . |
| 85 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 86 | M&L 20mm thick makrana marble tiles machine cut in urinal partion Fixed in wall jointed with grey cement slurry including cutting and polishing complete as directed. |
| 87 | M&L for toping layer of precast machine pressed cement concrete tiles of size 25cm x 25cm x 22 mm thick conforming to IS : 1237-1980 shall be laid in neat cement slurry over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with chemical like Tile grout or equilent complete all as specified and directed. |
| 88 | Supply and layin trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wirearmoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 25 Sqmm2 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed. Make KEI/Finolex/Havells |
| 89 | M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 63 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified |
| 90 | Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil. |
| 91 | Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 sqmm (nominal area) cable using approved colour code as per IS drawing in and incl heavy duty PVCconcealed conduit wiring. not less than 25 mm which shall be increased as per site requirement with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 mm as continuous earth wire connected to common earth dolly complete all specified and marking good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete and as directed Engr-in-Charge.Make :- polycab/finolex/Havells/Legrand(a) One light point/Fan point controlled by one switch. |
| 92 | (b) One 3 pin socket outlet 5Amps on the same board with other swithches. |
| 93 | (c) One 3 pin socket outlet 5Amps on the same board with other swithches. |
| 94 | Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4 sqmm (nominal area) cable using approved colour code as per IS drawing in and incl heavy duty PVCconcealed conduit wiring.not less than 25 mm which shall be increased as per site requirement with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 4 mm as continuous earth wire connected to common earth dolly complete all specified and marking good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete and as directed Engr-in-Charge. |
| 95 | M &L for ceiling rose2to 3 terminal PVC/polycarbonate, isolated body type suitable for AC 230 volts complete all as specified. |
| 96 | M & L for module cover plate with frame as per site requirements for following module complete all as specified and as directed.(a) 1 module |
| 97 | (b) 3 module |
| 98 | (c) 6 module |
| 99 | M &L for modular metal flush box as per site requirement complete all as specified and as directed.(a) 1/2 module |
| 100 | (b) 3 module |
| 101 | (c) 6 module |
| 102 | M & L for modular switch 1 way 6 Amp 1 module complete all as specified and as directed |
| 103 | M & L for modular switch 1 way 16/20 Amp 1 module complete all as specified and as directed. |
| 104 | M & L for modular socket 6A 2/3 pin universal 2 modular, complete all as specified and as directed. |
| 105 | S&F16 Amp with 20 Amp MCB, Sheet Steel Enclosure DBOXx SRCD plug & play all-in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as protection from overload and short circuit faults and fitting on wallwith cutting as require size and shape for fitting of Socket outlet 16 Amp with 20 Amp MCB Sheet Steel Enclosure complete all as specified and directed by Engr-in-Charge, Havells cat No.DHDMCSN0251016 or Philips, cromptan, wipro, legrand or equivalent. |
| 106 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make Havells/Wipro/Crompton/Bjajaj |
| 107 | S & F energy efficient 10/12 watt (2.0 feet) LED integrated batten type luminaries mirror type suitable for watt or ceiling mounting with built in LED chip & integral LED driver 10/12 watt. Aluminum channel housing & polycarbonates diffuser of length 600 mm (approx) Color temperature 6500 k or as directed efficiency range 200-270V surge protection of 2 KV estimated life span of 50,000 hrs with all accessories, complete with fixing arrangement fitting shall be internally prewired and confirming to LM 79 & 80 standard, making all connection using 1.5 sqmm copper conductor multistandard PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connection complete all as specified and directed by Engr-in-Charge (Note (i) LED fitting shall be provided for 3 years warranty (ii) Location for installation of LED fitting shall be as per approved drawing)Make Havells/Wipro/Crompton/Bjajaj |
| 108 | Supply and fixing LED Bulk head type high out put, 10 watt, 220 V AC, color temperature 6500 k or as directed, efficiency not less than 100 lumen/watt or total lumen output not less than 1000/10 watt ,estimated life span of 50,000 hrs with all accessories , complete with fixing arrangement fitting shall be internally prewired and conforming to LM 79 & LM 80 standard, IP 65 protection dust and water resistant, surge protection up to 2.5 KV, PC opal high efficiency diffuser, die cast aluminum housing with complete assembly , suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistandard PVC insulated with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | Supply and fix distribution board (DB), double (CRCA sheet ) dust and vermin proof SPN 12 way with appropriate Amps rated copper busbar, neutral bar, internal earth bar and cable tiles for cable management reversible door for iP 43 & IP 54, IK 09 impact resistance, single pole and neutral 250 volts ,flush to watt including chases cutting in wall for fixing good distributed wall surfaces to match with existing specification complete all as specified all as directedNote – Rates are inclusive for flush (concealed) mounting of DB SPN) |
| 110 | Supply and fixing 240V, 10 KA ‘C’ curve miniature circuit breaker (MCB) single pols of current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning all as specified and directed.Make Havells/Legrand/CG/L&T |
| 111 | Supply and fixing 240V, 10KA ‘C’ curve miniature circuit breaker (MCB) single pole and nutral of current carrying capacity 63 Amps, in the MCB DB complete with connection testing and commissioning all as specified and directed.Make Havells/Legrand/CG/L&T |
| 112 | S&F16 Amp with 20 Amp MCB, Sheet Steel Enclosure DBOXx SRCD plug & play all-in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as protection from overload and short circuit faults and fitting on wallwith cutting as require size and shape for fitting of Socket outlet 16 Amp with 20 Amp MCB Sheet Steel Enclosure complete all as specified and directed by Engr-in-Charge,.Make Havells/Legrand/CG/L&T |
| 113 | S&F or exhaust fan 300 mm sweep, heavy duty motor with double ball bearing ,metallic body with laid guard to protect the dan to running AC, single phase 230 volts, including connection with 1.5 sqmm multi standardcopper conductor flexible wire from ceiling rose, complete with blades/frame and outside louvers with necessary fixing arrangement and making good to disturbed surface complete all as specified and directed.Make Havells/Bajaj/Crompton |
| 114 | Supply & fixElectric water heater,storage type with Glass line coated with inner tank(with not less than 7 yrs warranty) and heating element upto 2 KW of capacity 25 litre suitable to withstand 8 bar pressure , BEE 5 Star rated,compact cubeshape design for smaller bathrooms & weather proof IPX4 steel body, complete with all mounting accessories & safety valve, thermostate,NRV, PVC flexible connections with length 450 mm long 15 mm dia with brass hexagonal adoptors both side duly ISI marked suitable for hot/cold water complete including grouting of nuts and bolts etc. Make:Jaquar Elena Prime/Racold/ Havells or equilent,completeall as specified and directed by Engr-in-Charge. Make |
| 115 | M & L for Earthling compete with GI earth electrode plate of Size 600x600x6mm thick, buried directely to ground/earth pit not less than 2.25m deep below normal ground level, connected to GI wire 4 mm dia as earth lead up to test point with suitable GI nut/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 reinforced with expanded metal weight not less than 4 kg/sqm and frame of angle iron 25x25x6mm with lugs 02 nos with 5 mm dia MS bar handle made to shape excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel and wire mesh and light grade of earth wire protection pipe 15mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I ,connected to earthling testing point and testing on completion complete all as specified and directed by Engr-in-Charge. |
