|
| 1 | Dismantling of GI Pipe Connections from the Pressure Flter Plant of capacity 20000 Gallons, opening the Manhole and removal/taking out old Filter Media completely from Oxidation Chamber, Pre-filter, Iron Removal Filter and depositing the same to a distance not exc. 100 Metre and re-fixing the pipes in the original/existing Position after replacement of unserviceable PVC Nozzle (Dome type) including replacement of Gasket of Manhole Cover and necessary Bolts, Nuts, Washers, etc. as required, complete all as specified and as directed.NOTE :-(a) PVC Nozzle shall be measured and paid separately under appropriate Item as \"Supply only\" here-in-after.(b) Filling of Filter Media shall be measured and paid separately under appropriate Items here-in-after. |
| 2 | Dismantling of GI Pipe Connections from the Pressure Flter Plant of capacity 80000 Gallons, opening the Manhole and removal/taking out old Filter Media completely from Oxidation Chamber, Pre-filter, Iron Removal Filter and depositing the same to a distance not exc. 100 Metre and re-fixing the pipes in the original/existing Position after replacement of unserviceable PVC Nozzle (Dome type) including replacement of Gasket of Manhole Cover and necessary Bolts, Nuts, Washers, etc. as required, complete all as specified and as directed.NOTE :-(a) PVC Nozzle shall be measured and paid separately under appropriate Item as \"Supply only\" here-in-after.(b) Filling of Filter Media shall be measured and paid separately under appropriate Items here-in-after. |
| 3 | Supply only PVC Nozzle (Dome type) for Pressure Filter and Iron Removal Filter, complete all as specified and as directed. |
| 4 | S&F in repair, Brass Nozzles heavy duty to Delivery Cast Iron Pipe for Aeration Chamber of size 20mm to 25mm dia as per Site Requirement complete all as specified and as directed. |
| 5 | Taking out and removing existing Sand, accumulated mud etc.(Filter media) from the Rapid Gravity feedtype Filter Bed (installed at various Water Supply Installation), removing / disposal of soil to a distance not exc. 50 Metre, complete allas directed. |
| 6 | Taking out and removing existing Gravels of any size (Filter Media) from the Rapid Gravity type Filter Bed and removing /disposal of unserviceable Gravels to a distance not exc. 50 Metre, complete all as directed. |
| 7 | M&L Fresh Gravel of size 40 mm to 25 mm ( Gravels shall be from BARAKAR river) suitable for drinking purpose (as approved), filling in the Filter Bed of Rapid Gravity Filter, Pressure Filter, Oxidation Chamber after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed. |
| 8 | M&L Fresh Gravel of size 20 mm to 15 mm ( Gravels shall be from BARAKAR river) suitable for drinking purpose (as approved), filling in the Filter Bed of Rapid Gravity Filter, Pressure Filter, Oxidation Chamber after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed. |
| 9 | M&L Fresh Gravel of size 12 mm to 10 mm ( Gravels shall be from BARAKAR river) suitable for drinking purpose (as approved), filling in the Filter Bed of Rapid Gravity Filter, Pressure Filter, Oxidation Chamber after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed. |
| 10 | M&L Fresh Gravel of size 6 mm to 2 mm ( Gravels shall be from BARAKAR river) suitable for drinking purpose (as approved), filling in the Filter Bed of Rapid Gravity Filter, Pressure Filter, Oxidation Chamber after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed. |
| 11 | M&L Fresh Sand ( Sand shall be from BARAKAR river) of size 0.45 mm to 0.70 mm and co-efficient of uniformity shall be between 1.3 to 1.7 and Silica content should be not less than 90%, filling in layers in the Filter Beds, complete all as specified and as directed. |
| 12 | M&L Manganese Di-oxide (MnO2 Catalytic Media) Compound suitable for removing the presence of Soluble Iron/ odour in any form/ state in the water, complete all as specified and as directed. |
| 13 | Cleaning of Aeration Chamber with Drain(s) including taking out accumulated Sludge, Silt, Mud, etc. including scrapping down andcleaning Internal Surfaces, removing the old materials from Site and washing with Fresh Water, complete all as directed. |
| 14 | Draining out water from Sedimentation Tank including taking out accumulated Sludge, Silt, Mud, etc. includingscrapping down andcleaning Internal Surfaces, removing the old materials from Site and washing with Fresh Water, complete all as directed. |
| 15 | M&L Painting to Internal Surfaces of Iron Removal Chamber, Pre-filter Chamber and Oxidation Chamber including Pipes complete of Filteration Plant capacity 20000 Gallons with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water grade including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed. |
| 16 | M&L Painting to Internal Surfaces of Iron Removal Chamber, Pre-filter Chamber and Oxidation Chamber including Pipes complete of Filteration Plant capacity 80000 Gallons with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water grade including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed. |
| 17 | M&L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 20000 Gallons with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed. |
| 18 | M&L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 80000 Gallons with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed. |
| 19 | M&L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 10000 Gallons with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed. |
| 20 | M&L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 100 Gallons with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed. |
| 21 | M&L preparing surfaces of Filter Bed by scrapping with Wire Brush and applying Two Coats of Black Bituminous Paint suitable for Drinking Water, complete all as specified and as directed. |
| 22 | S&F in repair, Cast Iron Diaphragm Valve of size 125 mm wheel type with necessary Nut, Bolts, Gasket, Washer, etc.complete all as specified and as directed. |
| 23 | S&F in repair, Cast Iron Diaphragm Valve of size 150 mm wheel type with necessary Nut, Bolts, Gasket, Washer, etc.complete all as specified and as directed. |
| 24 | Excavation in trenches as in Soft/ Loose Soil not exc. 1.50 Metre wide and not exc 1.50 Metre in depth and getting out for taking out/laying of GI/CI Pipe Line and making bottom surfaces of excavation leveledand required gradient complete all as specified and as directed. |
| 25 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed. |
| 26 | Removing Surplus soil/spoil to a distance not exc. 50 Metre away and depositing where directed at a level not exc. 1.50 Metre above the starting point complete all as specified and as directed. |
| 27 | Supply & laying Steel Water Tubing 40mm bore, Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation including Taking up or down old unserviceable Pipe, complete as all specified and as directed. |
| 28 | Supply & laying Steel Water Tubing 50mm bore, Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation including Taking up or down old unserviceable Pipe, complete as all specified and as directed. |
| 29 | Supply & laying Steel Water Tubing 80mm bore, Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation including Taking up or down old unserviceable Pipe, complete as all specified and as directed. |
| 30 | Supply & laying Steel Water Tubing 100mm bore, Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation including Taking up or down old unserviceable Pipe complete as all specified and as directed. |
| 31 | S&F Sluice Valve 80 mm bore (dia), both End Flanged with Cast Iron Operaring Wheel, Stainless Steel Spindle, etc., Class PN-1.6 (all as per latest IS Specifications) including necessary jointing and Jointing Materials such as Gasket, Nuts, Bolts, Washers etc. including taking out unserviceable Sluice Valve, complete as all specified and as directed. |
| 32 | S&F Sluice Valve 100 mm bore (dia), both End Flanged with Cast Iron Operaring Wheel, Stainless Steel Spindle, etc., Class PN-1.6 (all as per latest IS Specifications) including necessary jointing and Jointing Materials such as Gasket, Nuts, Bolts, Washers etc. including taking out unserviceable Sluice Valve, complete as all specified and as directed. |
| 33 | S&F Sluice Valve 150 mm bore (dia), both End Flanged with Cast Iron Operaring Wheel, Stainless Steel Spindle, etc., Class PN-1.6 (all as per latest IS Specifications) including necessary jointing and Jointing Materials such as Gasket, Nuts, Bolts, Washers etc. including taking out unserviceable Sluice Valve, complete as all specified and as directed. |
| 34 | S&F Sluice Valve 250 mm bore (dia), both End Flanged with Cast Iron Operaring Wheel, Stainless Steel Spindle, etc., Class PN-1.6 (all as per latest IS Specifications) including necessary jointing and Jointing Materials such as Gasket, Nuts, Bolts, Washers etc. including taking out unserviceable Sluice Valve, complete as all specified and as directed. |
| 35 | S&F Butterfly Valve 80 mm bore (dia),Class PN-1.6 (all as per latest IS Specifications) includingjointing and Jointing Materials such as Gasket, Nuts, Bolts, Washers etc. including taking out unserviceable Sluice Valve, complete as all specified and as directed. |
| 36 | M&L Painting to letters/marking of OHT water level measuring strip with indicator, UG sump water level measuring strip with indicator, Jack well,Iron Removal Chambers, Pre-filter Chambers, Oxidation Chambers with Two Coats of Synthatic Enamel Paint/Reflector paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed. |
| 37 | Supply and erection of MS chequered plate of suitable Thickness as directed for clarifier bridge, water Channels, ducts etc complete all as specified and as directed. |
| 38 | Design, fabricate ,Supply, installing, testing and commisioning and design of factory made powder coated (CPRI approved) out door type, dust & vermin proof, LT feeder piller box made out of 3.15 mm thick CRCA steel sheet of suitable size and and angle iron 50x50x6mm, grouted in suitable size brickwork platform built in cement mortar 1:6, including bus bar, internal wiring with PVC insulated, single core copper conductor cable of suitable size duly numbered with tags for the circuits with hinged double door shutters (front & rear), cubical type with locking arrangement and slanted roof. The panel shall be 3 phase, 4 wire, 415Volts, AC, 50Hz supply system. the panel board shall comprise of following items and all specified in SSR part -I clause No 19.21 and connecting up all the LT UG cables including taking down old unserviceable panel boxBusbar: 600 Amps rated Aluminum busbar duly insulated with PVC Sleave asper standard colour code and rigidly mounted on backalite/ DMC insulated bus bar support ((square/ round) insulators of suitable size and good insulation resistance.(a) INCOMING(i)ACB 4 Pole 630 Amps breaking capacity 50 kA -01 Nos.(ii)Three phase Digital ammeter with CTs & selector switch - 1set (iii) Three phase Digital Voltmeter with selector switch - 1 set(iv)R ,Y , B indicator Lamps1 Set(v) Digital Frequency meter 40-60 Hz - 1 No(vi)Copper wound CTR 160/5, 100/5, 100/7 - 03 Set(b)OUTGOING(i) MCCB 4 Pole 250.Amps, (Ics=100%Icu), 415 V, 36 kA -04 Nos (3 Working 1 spare)(ii)MCCB 4 Pole 160 Amps 4 Pole , 415 V , 36 kA - 02 Nos(iii) MCCB 4 Pole 63 Amps 4 Pole , 415 V , 36 kA - 02 Nos(iv) Digital Combined Voltmeter and ammeter - 08 Nos(v)Copper wound CTR 160/5, 100/5, 100/7 - 03 Set(Note: Every compartment must have sufficent space to accommodiate any size of MCCBs of similar capacity. Each MCCBs must be used with sprader link. All electric cable connection should be done using proper size of cable lugs and cable glands) |
| 39 | Periodical maintenance (monthly) of following vehicles as per manufacturer recommendation complete all as specified and as directed.Note for ser item No 40 to 53: periodical maintenance includes the following activities(i) Checking the fuel and oil filter ascertaining its condition.(ii)Checking the fan, fan belt and adjusting tension.(iii)Checking the Air filter and cleaning the Air filter.(iv)Checking of oil level and ascertain its condition.(v) Checking the fuel pump timing and adjusting if required.(vi)Checking of fuel tank, fuel pump, injector/carburettor.(vii)Tightening all bolt and nuts and mounting bolts and nuts.(viii) Checking the adjustment of the self starter and dynamo.(ix)Checking the battery distilled water level and topping up to the required level.(x) Checking the radiator and radiator hose and arresting leak if any.(xi) Checking the air pressure in the wheels and arresting leak if any.(xii)Greasing and oiling all bearings/moving parts of suspention, transmission, steering etc(xiii)Cleaning engine and check for engine mounting/ any leakages(xiv)Checking tightess of radiator mounting, hoses(xv) Checking self starter and its mountings(xvi)Checking for wiring system and ignition for wear/damage of insulation and rectify the damage if any(xvii)Checking of chases, wheels and break systems.(xviii) Service report from authorised service center shall be submitted for every month.(xix)Cost for Highly skilled labours and T&P necessary for maintenance/ checks repairs/ replacement is deemed to be included in the rate quoated by the contractor(xiv)Distilled water,Electrolite, Grease etc for maintenance of vehicle is deemed to be included in the rate quoated by the contractor.(xv)Replacement/top up of any type Oil shall be measured and paid under relevant items as supply only and labour cost is deemed to be included in the above quoted rate.(xvi) Replacement of fuel /Oil/Air filter shall bemeasured and paid as supply only under relevant items and labour cost is deemed to be included in the above quoted rate.(xvii)Spares required for replacement during above maintenance shall be measured and paid under relevant item as supply only and labour cost is deemed to be included in the above quoted rate. |
| 40 | Maruti Suzuki dzire LXI (20B-133370L) |
| 41 | Eicher Pro 2075 (23D-212647W) |
| 42 | Eicher Pro 2075 (23D-212648N) |
| 43 | Eicher Pro 2075 (24D-213938K) |
| 44 | Tata Xenon(20C-108290N) |
| 45 | Tata Yodha(22C-111100A) |
| 46 | Tata Yodha(22C-111102P) |
| 47 | Hero Deluxe (21A-075236K) |
| 48 | Hero Deluxe (21A-075237E) |
| 49 | Bajaj Platina(22A-076586L) |
| 50 | Bajaj Platina(22A-076587H) |
| 51 | Bajaj Platina(24A-078513Y) |
| 52 | Bajaj Platina(24A-078514W) |
| 53 | Bajaj Platina(24A-078515N) |
| 54 | Supply only new Suspension bolt suitable for TATA Mobile complete all as directed |
| 55 | Supply only new tie Rod end for TATA Mobile complete all as directed. |
| 56 | Supply only new Dry unit with assy for TATA Mobile complete all as directed. |
| 57 | Supply only Upper ball joint for Tata Mobile complete all as specified and as directed. |
| 58 | Supply only Low ball joint for Tata Mobile complete all as directed. |
| 59 | Supply only Centre pin bracket for Tata Mobile complete all as directed. |
| 60 | Supply only Centre pin bush for Tata Mobile complete all as directed. |
| 61 | Supply only Brake pad for Tata Mobile complete all as directed. |
| 62 | Supply only Cliper hanger assembly for Tata Mobile complete all as directed. |
| 63 | Supply only Cliper accessories for Tata Mobile complete all as directed. |
| 64 | Supply only Rear brake shoe for Tata Mobile complete all as directed. |
| 65 | Supply only Brake pipe for Tata Mobile complete all as directed. |
| 66 | Supply only Rear brake disc for Tata Mobile complete all as directed. |
| 67 | Supply only Rear brake bracingfor Tata Mobile complete all as directed. |
| 68 | Supply only Front Hub bracingfor Tata Mobile and supply and fixing new front Hub bracing and testing complete all as directed. |
| 69 | Supply only Rear axcle coil seal for Tata Mobile complete all as directed. |
| 70 | Supply only Front coil spring of Tata Mobile complete all as directed. |
| 71 | Supply only Rear main spring for Tata Mobile complete all as directed. |
| 72 | Supply only Rear spring bush for Tata Mobile complete all as directed. |
| 73 | Supply only Rear Shocker assy for Tata Mobile complete all as directed. |
| 74 | Supply only water pump accessories complete for Tata Mobile complete all as directed. |
| 75 | Supply only Oil pump accessories complete for Tata Mobile complete all as directed. |
| 76 | Supply only Gear box mounting complete for Tata Mobile complete all as directed. |
| 77 | Supply only Gear shifter shaft complete for Tata Mobile complete all as directed. |
| 78 | Supply only Clutch plate complete for Tata Mobile complete all as directed. |
| 79 | Supply only Door lock assembly complete for Tata Mobile complete all as directed. |
| 80 | Supply only Release bearing for Tata Mobile complete all as directed. |
| 81 | Supply only Silencer accessories complete for Tata Mobile complete all as directed. |
| 82 | Supply only Shocker absorber rear complete for Tata Mobile complete all as directed. |
| 83 | Supply only Air cleaner filter complete for Tata Mobile complete all as directed. |
| 84 | Supply only Side mirror for Tata Mobile complete all as directed. |
| 85 | Supply only Diesel filter for Tata Mobile complete all as directed. |
| 86 | Supply only Oil filter for Tata Mobile complete all as directed. |
| 87 | Supply only Brake oil for TATA mobile complete all as directed. |
| 88 | Supply only Turn signal lamp assy (turn indicator) of vehicle Eicher complete all as directed. |
| 89 | Supply only Hub greasing unit kit of vehicle Eicher complete all as directed. |
| 90 | Supply only diesel filter set of vehicle Eicher complete all as directed. |
| 91 | Supply only Hose flexible for vehicle Eicher complete all as directed. |
| 92 | Supply only return hose of oil vaccum pump of vehicle Eicher complete all as directed. |
| 93 | Supply and fixing battery for Eicher/Tata mobile complete all as directed. |
| 94 | Supply only new Fan Belt suitable for cooling fan of vehicle Eicher complete all as directed. |
| 95 | Supply only Kit brake lining (320x110) (STD) ALHC of Eicher complete all as directed. |
| 96 | Supply only Spring shoe return, F&R-Swan of Eicher complete all as directed. |
| 97 | Supply only Air filter set E483TC complete all as directed. |
| 98 | Supply only head light Lamp Combination of Eicher complete all as directed. |
| 99 | Supply only King Pin Kit of Eicher complete all as directed. |
| 100 | Supply only Brake Oil Dot-4 of Eicher complete all as directed. |
| 101 | Supply only new Clutch Kit of existing specification/ capacity suitable for Eicher complete all as directed. |
| 102 | Supply only new WC KIT FR LH / FR RH as per existing specification complete all as directed. |
| 103 | Supply only newRear Minor Kit(LCV) Dia 31.75 complete all as directed. |
| 104 | Supply only new Mirror Assy Room Canter-90 suitable for Eicher complete all as directed. |
| 105 | Supply only new Gear Box Bushing Kit complete all as directed. |
| 106 | Supply only Oil filter for Eicher complete all as directed. |
| 107 | Supply only Battery Lead for all vehicles complete all as specified and as directed. |
| 108 | Supply only Battery terminal for all vehicles complete all as specified and as directed. |
| 109 | Supply only Coolant for Eicher/TATA Mobile complete all as specified and as directed. |
| 110 | Supply only Distlled water for all vehicles complete all as specified and as directed |
| 111 | Supply only sulphuric acid 1250 G for battery for all vehicles complete as directed |
| 112 | Supply only Horn kit complete suitable fo Tata mobile/ Eicher complete all as directed. |
| 113 | Supply only Transmission oil 80W90 for Eicher/ TATA Mobile as per manufacturer complete all as directed. |
| 114 | Supply only rear view mirror complete suitable for Tata Mobile /Eicher complete all as directed. |
| 115 | Supply only Engine oil for Eicher/ TATA Mobile as per manufacturer complete all as directed . |
| 116 | Supply only Turning lamp for TATA Mobile complete all as directed. |
| 117 | Supply only Gear box oil for Eicher/ TATA Mobile complete all as directed. |
| 118 | Gasket kit for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 119 | Chain sproket kit for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 120 | Clutch disc for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 121 | Oil seal kit for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 122 | Spark plug for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 123 | Timing chain for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 124 | Engine oil for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 125 | Supply and fixing battery for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 126 | Supply only new Bearing set (bearing) complete all as specified and as directed. |
| 127 | Foot rest rear for Hero Deluxe / Bajaj Platina motor cycle complete all as directed. |
| 128 | M&L for repairs and servicing of self starter including replacement of worn out/ unserviceable parts complete all as directed.Note: Spares required will be measured and paid separately under appropiate items and labour cost is deemed to inclusive in the Unit rate Quoted. |
| 129 | Supply only Soleniod switch any type for self starter complete all as directed. |
| 130 | Supply only Carbon brush set any type with brush holder complete all as directed. |
| 131 | Supply onlyDrive End Plunger complete all as specified and as directed. |
| 132 | M&L for dismantling and repairs to fuel injection feed pump of TATA Mobile including replacement of worn out spares like delivery valves, Nozzles, bearings, fly weight, packing kit, and copper washer kit and including reassembling and recalibration of pump complete all as directed. |
| 133 | M&L for removing wheel complete of any vehicle with tyre and tube and taking out tube for repair and testing for leakage after repair including reassembling after repair complete all as specified and as directed. |
| 134 | M&L for repairs to upholstry work for Two wheeler as per existing complete all as specified and as directed. |
| 135 | M&L for disconnecting, removing radiator assembly from the Vehicle Eicher/Tata Mobile and descaling the radiator throughly with CTC solution/ any other chemical solvent agent, stopping of leakeage at place of copper cores and tubes by brazing including scapping and re-installing after repair including testing complete all as directed. |
| 136 | M&L for replacement of work out spares like Bendex drive, carbon brush, solinoid coil, Armature including rewinding stator including necessary testing complete all as directed. |
| 137 | M&L for dismantling unserviceable Element filter of Air Compressor and supply and fixing new Element filter and testing complete all as directed. |
| 138 | Dismantling unserviceable Pully CI QG of Air Compressor and supply and fixing new Pully CI QG and testing complete all as directed. |
| 139 | Dismantling unserviceable Body valve control of Air Compressor and supply and fixing new Body valve control and testing complete all as directed |
| 140 | Dismantling unserviceable Valve bypass thermal pin of Air Compressor and supply and fixing new Valve bypass thermal pin and testing complete all as directed. |
| 141 | Servicing/ maintenance of Car washerplant model No LL 03 022 as per manufacturer recommendation complete all as specified and as directed.Note: Spares required will be measured and paid separately under appropiate items and labour cost is deemed to inclusive in the Unit rate Quoted. |
| 142 | Supply only PlungerItem code No - 110319200 Make ELGI complete all as directed. |
| 143 | Supply only Packing ring lippedItem code No - 110 460 250 Make : ELGI complete all as directed. |
| 144 | Supply only Spring plateItem code No - 110510510 Make : ELGI complete all as directed. |
| 145 | Supply only Ring split Item code No - 110510500 make : ELGI complete all as directed. |
| 146 | Supply only Locking piece Item code No - 110424050 Make : ELGI complete all as directed. |
| 147 | Supply only Valve suction M/C Item code No - 110422992 Make : ELGI complete all as directed. |
| 148 | Supply only Spring Valve suction M/c Item code No - 110423910 Make : ELGI complete all as directed. |
| 149 | Supply only Valve Delivery Valve Item code No - 110425052 Make : ELGI complete all as directed. |
| 150 | Supply only Belt V A 58Item code No -000905158 Make : ELGI complete all as directed. |
| 151 | M&L for tyre rotation including wheel balancing for all vehicles as per manufacturer recommendation at company authorized shop including submission of report complete all as directed. |
| 152 | Supply only Wiper Blade for TATA Yodha/Xenon complete all as directed. |
| 153 | S&F of two-stage piston air pressure compressor suitable for continous duty applications, 5 HP motor, 3 phase and 220 L air tank capacity with deliver a maximum pressure of 175 psi. for vehicle complete all asdirected. |
| 154 | S&F of durable and thickened high pressure hose pipe with metal water gun nozzle head complete all as directed. |
| 155 | Supply of mechanic creeper with heavy duty caster with padded headrest for checking/repair of vehicle and complete all as specified and as directed. |
| 156 | Supply of heavy duty 10 ton capacity hydraulic floor trolley jack (manual) with lifting range of 170-560 mm complete all as directed |
| 157 | Servicing/maintenance of STIHL FS 250 Brush cutter as per manufacturer recommendation complete all as specified and as directed. Note: Spares required will be measured and paid separately under appropiate items and labour cost is deemed to inclusive in the Unit rate Quoted. |
| 158 | Supply and fixing piston/piston ring make: Stihl complete all as directed. |
| 159 | Supply and fixing crank shaft make: Stihl complete all as directed. |
| 160 | Supply and fixing gasket set Make: Stihl complete all as directed. |
| 161 | Supply and fixing oil shield set Make: Stihl complete all as directed. |
| 162 | Supply and fixing carburetor assembly Make: Stihl complete all as directed. |
| 163 | Supply and fixing clutch assembly Make: Stihl complete all as directed. |
| 164 | Supply and fixing trimmer assembly Make: Stihl complete all as directed. |
| 165 | Supply and fixing Brush Trimmer line square type complete all as directed. |
| 166 | Supply and fixing Spark Plug complete all as directed. |
| 167 | S&F DEF Eicher mile max DEF 1/20 Ltr part No 14300858L HSN code 31021090 and complete all as directed. |
| 168 | Supply Only Taparia bench vice 100 mmand complete all as specified and as directed. |
| 169 | Supply only Taparia socket set CS14 MXL 12.7 mm sq driveand complete all as directed. |
