|
| 1 | Supplying roofing compound and bitumin washers for closing leakages from the bolt holes of AC sheet/GI sheet roofing and ridges,replacing damaged bitumin washers pasting and covering with roofing compound,tightening J bolts, nuts etc complete.(rate shall be inclusiveof cost of bitumin washers, GI washers, Roofing compound and labour charges and charges for tools and plants etc.) The work is to be carried out at roof of godown at a height upto 12 metres from ground level after observing all safety norms.(Observed data) |
| 2 | Supplying and pasting tarfelt sheet one layer of approved brand (STP or equivalant ) over broken AC sheet roofs/GI sheets, ridges,gable wall joints,valley gutters,sides of parapet etc after cleaning the surface to which tarfelt is to be pasted and applying bitumastic roofing compound (Shalibond CS or equivalant.the rate shall includelabour charges,scaffolding complete as directed by engineer in charge.The work is to be carried out at roof of godown at a height upto 12 metres from ground level after observing all safety norms.) (Observed data) |
| 3 | Cleaning masonry drains of width 25 cms to 60 cms and depth up to 60 cms, including removal of silt and rubbish, cutting and removing grass and other vegetation from the sides of drains and disposal of rubbish within a distance of 150 mts.etc.complete. (Observed data) |
| 4 | Cleaning Verandah eave gutter and disposal of rubbish to the dumping ground including tightening clamps etc complete.(Observed data) |
| 5 | Cleaning of well/sump including removing the cover and refixing, dewatering, removing silt , clay etc from the bottom of the well, cleaning the walls of the well, removal of vegetation along sides, disposal of all debris etc. complete as directed by the Engineer-in-charge (The work has to be carried out after following all the safety norms) (the rate shall include all labour, hire charges of the pump equipment, scaffolding etc).(Observed data) |
| 6 | Cleaning of septic tank with cleaning machine fitted with pump including removing the cover slab, cleaning and dechocking of sewer line, taking out sediments sludge etc and disposal at safe place outside the FCI complex to be identified by the contractor and cleaning the premise of tank complete as directed by the Engineer-in -charge (The work has to be carried out after following all the safety norms for handling the septic tank waste) (Observed data) |
| 7 | Cleaning of main over head tank and other P.V.C.tanks installed over the roofof depot/ staff quarters and other buildings etc. including removal of silt/rubbish from tank, disinfecting with bleaching powder @ 0.5 gm per litre capacity of tank, disposal of silt/debris outside the FCI boundary etc.. all complete as per direction of Engineer-in-charge. (The work has to be carried out at roof top level after following all the safety norms)(Observed data) |
| 8 | Reparing/Servicing rolling shutters such as removal of top covers tightening/ loosening the springs adjusting the dislocation of parts if any and applying greese to the springs side guides ( 0.40 kg greese/ shutter) after cleaning and refixing the cover in position etc as directed by engineer in charge.(Observed data) |
| 9 | Reparing/Servicing sliding doors such as adjusting top and bottom rails and pullies0.25 kg greese/shutter) after cleaning the surface etc complete as directed by engineer in charge.(Observed data) |
| 10 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (Item No 15.3 of DSR 2023) |
| 11 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (Item No 15.7.4 of DSR 2023) |
| 12 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of :GS sheet (Item No 15.28.1 of DSR 2023) |
| 13 | Making soak pit 1.5 m diameter 2.5 m deep with concrete rings and RCC slab at top, including excavation, placing of rings, filling with available brick bats aggregate etc.. all complete as per direction of Engineer-in-charge. (Observed data) |
| 14 | Providing and laying factory made pre cast solid blocks of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above plinth up to floor two levelin CM 1:6 ( 1 cement : 6 coarse sand) etc complete.(Analysed item) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(Item no. 5.22.6 of DSR 2023) |
| 16 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size)(Item No 5.1.3 of DSR 2023) |
| 17 | Centering and shuttering including strutting, propping etc. and removalof form work for : Suspended floors, roofs, landings, balconies and access platform (Item No 5.9.3 of DSR 2023) |
| 18 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surfacecomplete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick(Item no.14.91.1 of DSR 2023) |
| 19 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below( Item 15.12.1 of DSR 2023) |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)(Item No.21.1.1.2 of DSR 2023) |
| 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)(Item No.21.1.2.2 of DSR 2023) |
| 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(Item No.21.3.1 of DSR 2023) |
| 23 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides (Item no.10.29.1 of DSR 2023) |
| 24 | Renewing glass panes and refixing existing wooden fillets: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (Item no.14.7.1 of DSR 2023) |
| 25 | Deduct cost of salvagable materials received from the work of dismantling work on as is where is condition includingremoving from the site - Wooden windows |
| 26 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece (Item No.10.5.2 of DSR 2023) |
| 27 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) :Item 13.1.1 as per DSR 2023 |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(DSR 2023 Item No 4.1.3) |
| 29 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) Item No 13.16.1 of DSR 2023 |
| 30 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) Item No 14.1.1 of DSR 2023 |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. : External work 20 mm nominal dia Pipes( Item no. 18.9.2 of DSR 2023) |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work exposed on wall 20 mm nominal dia Pipes( Item no. 18.7.2 of DSR 2023) |
| 33 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame (item 9.121 of DSR 2023) |
| 34 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames (item 9.122.1 of DSR 2023) |
| 35 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.(Item no.14.82 of DSR 2023) |
| 36 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Item no.17.2.1 of DSR 2023) |
| 37 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. (Item no.18.54.1 of DSR 2023) |
| 38 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (Item no.15.23.1 of DSR 2023) |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Item no.8.31 of DSR 2023) |
| 40 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm (Item no.11.41.1 of DSR 2023) |
| 41 | Providing and fixing soil, waste and vent pipes including jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 25 mm OD PVC pipe of standard make.The rate shall be inclusive of fittings and labour.(Analysed as per 18.9.3 of DSR 2023) |
| 42 | Providing and fixing soil, waste and vent pipes including jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 50 mm OD PVC pipe of standard make.The rate shall be inclusive of fittings and labour. (Analysed as per 18.9.6 of DSR 2023) |
| 43 | Providing and fixing galvanized steel plain sheets for closing the ventilator opening, including fixtures and fittings, tools, scaffolding etc.. Complete all as per direction of Engineer-in-charge. (The work has to carried out a height upto 10 m from ground level after following all the safety norms) (Analysed item based on DSR 2023 ) |
| 44 | Painting standard stack plan inside the godownwith approved quality Floor paint after marking the size and painting Two coat paint above primer measuring 100 mm wide around the periphery of stack etc. completeas per direction of Engineer in charge. |
| 45 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)(Item no.13.47.1 of DSR 2023) |
| 46 | Supplying labour for routine works including all incidentals and services as per the direction of engineer in charge( Fitter Grade-1/carpentar grade-1/plumber/welder) |
| 47 | Supplying labour for routine works including all incidentals and services as per the direction of engineer in charge (Beldar/Coolie/Helper) |
| 48 | Deduct cost of salvagable materials received from the work of dismantling work on as is where is condition includingremoving from the site - Iron scrap. |
