|
| 1 | Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 3 | Supplying, installation, testing and commissioning of Kirloskar make horizontal centrifugal end suction type pump Model: DB 50/20xe (having Suc. × Del. nozzle size: 65mm X 50mm) coupled with ABB make 15kW/20HP, 2930RPM, IE2 class efficiency, 415V+10%, 50Hz+5%, S1 duty, IP-55 protection, TEFC/NFLP Squirrel Cage Induction Motor, mounted on a common base plate with coupling guard suitable to give discharge of 56M3/Hr. at a total head of 55Mtr. Material of Construction of Pump: Casing: C.I.; Impeller: C.I.; Shaft: 45C8; Sleeve: SS410. Sealing Arrangement: Gland Packing. Direction of Rotation: Clockwise from driving end. Scope of Supply: Pump, Motor, Base Plate, Coupling & coupling guard. |
| 4 | Providing laying, testing & commissioning of \"C\"class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm dia |
| 5 | Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm Dia |
| 6 | Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm Dia |
| 7 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 100 mm dia |
| 8 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :80 mm dia |
| 9 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia |
| 10 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100 mm dia |
| 11 | Providing & fixing of Single Rubber expansion joint bellow including connection etc. as required. |
