|
| 1 | Clearing light jungle with uprooting directed by the Engineer in charge and disposed away from site including cost of all materials, labour ,lead lift , etc complete, as per technical specification. |
| 2 | Clearing heavy jungle with uprooting directed by the Engineer in charge and disposed away from site including cost of all materials, labour ,lead lift , etc complete, as per technical specification. |
| 3 | Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shale, murram gravel, stoney earth & earth mixed with small size boulders and hard gravelly soil and depositing the earth in the places shown by the Engineer with initial lead of 10 M and initial lift of 2 m etc. complete. |
| 4 | Earth work excavation in MR & DMR not requiring blasting including transporting and dumping with head load lead upto 200m with all leads, lifts, etc., complete. |
| 5 | Removal of the deposited silt from the reservoir using earth moving machineries and tippers, transporting the same to the dumping yards with a lead of approx. 1 to 1.5 km (irrespective of route taken for transportation) , including water diversion arrangement, formation of temporary coffers / approach roads, compacting the dumped silt layer by layer, each layer shall not to exceed 0.5 meter thick and compaction up to 80% of proctor density at dumping yard to the required level and slope, all labour, lead & lift etc., complete as per the instruction of site engineer at site. |
| 6 | Dismantling of existing RCC portion by required shape and cleaning away from the site for an initial lead of 10m and lift of 2m as per the direction of engineer including cost of labour, lead, lift, T&P, etc. complete and devoluting the scrap to the stores. |
| 7 | Dismantling the plain Cement Concrete and clearing away the retrieved materials away from site as directed by the site Engineer including lead, lift, etc., complete |
| 8 | Formation of earthen bund by filling with Red Gravel Trimming and sectioning the bed and side slope of earthen bund in all soils upto a thickness of 7.50 to 15cm including labour charges, hire charges for machineries, all materials, lead, lift and compaction by power roller watering, sectioning, the side slopes labours, etc., complete. |
| 9 | Formation of fine filter on the upstream earthen bund portion below dry stone packing by supplying and filling with river sand including cost of all materials, lead, lift, etc., complete. |
| 10 | Providing and placing in position plain cement concrete M10 concrete using 40mm Metal (HBS) including cost of all materials lead, lift, labour for curing etc. Complete |
| 11 | Providing and placing in position plain cement concrete M15 using broken hard granite coarse aggregate size of 20mm and down graded including shuttering charges, placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour, etc., complete as per the direction of Engineer and complying with standard specification (with Shuttering). |
| 12 | Providing and placing in position RCC M 20 Grade for Reinforced Cement Concrete using broken hard granite coarse aggregate size of 20 mm downgraded including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc. complete but excluding cost of steel reinforcement as per the direction of the Engineer and complying with standard specifications (Without shuttering). |
| 13 | Providing and placing in position RCC M 20 Grade for Reinforced Cement Concrete using broken hard granite coarse aggregate size of 20 mm downgraded including shuttering charges, placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc. complete but excluding cost of steel reinforcement as per the direction of the Engineer and complying with standard specifications (With Shuttering). |
| 14 | Providing and placing in position RCC M25 using 20mm down graded HBG metal with minimum cement content of 365Kgs/m3 including cost of all materials, vibrating, curing, finishing the surface with all leads and lifts, labour, etc., complete as per the direction of Engineer and complying with standard specification |
| 15 | Supplying fabricating and fixing in position of M.S /RTS rod for reinforcement including cost of steel binding wire, lead, lift etc complete. |
| 16 | Forming vertical joint in the weir construction with premoulded mastic pad of 25mm thick to full depth and cross section of weir as per the specification including cost of all martials lead, lift, labour ect., complete. |
| 17 | Supplying, laying and jointing in position 225mm x 8mm wide PVC water stopper ribbed with centre bulb and end grip of wall thickness to stand with water head and of approved quality and manufacture for all construction and expansion joints as per specification and as directed by the engineer including cost of all materials, lead, lift ect., complete. |
| 18 | Rough Stone dry packing in the sides of earthen bund including packing , cost of stone, all materials, lead, lift, labour, etc.., complete. |
| 19 | Rough Stone dry packing in the sides of earthen bund with locally available rough stone including packing , cost of all materials, lead, lift, labour, etc.., complete. |
| 20 | Dismantling and re-laying of Rough Stone dry packing in the earthen bund including cost of all materials, lead, lift, labour, etc.., complete. |
| 21 | RR masonry with CM 1:5 for road parapet and revetment including cost of all materials labour leads, lift, etc. complete. |
| 22 | Brick work in CM 1:5, using II class chamber bricks of size 9\"x4 3/8\"x2 3/4\" including cost of all materials, labour, lead, lift etc complete. |
| 23 | Plastering with CM 1:5, 12 mm thick including cost of materials, labour, lead, lift etc complete. |
| 24 | Supplying and paving first quality design Stain Free Nano Polish vitrified tiles Johnson or equivalent approved colour and design of size 600 mm x 600 mm x 8mm thick with CM 1:3, 20 mm thick and pointing with colour cement including cost of all materials, labour charges, lead, lift, etc. complete. |
| 25 | Providing sand bags in the eroded berms including cost and conveyance of sand, supply of empty bags, loading and unloading, dewatering, lead charges , filling in bags with sand, shifting them and placing at eroded berms as directed by department officers etc., complete. |
| 26 | Dismantling the damaged rolling shutter as directed by the site Engineer including lead, lift etc., complete and devoluting the scrap to the stores. |
| 27 | Supply, fixing a solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter, complete as per the direction of the Engineer and complying with standard specifications, cost of all materials, lead, lift, transport, etc., complete. |
| 28 | Providing and fixing electrically and manually operated ROLLING SHUTTERS for opening of size along with wicket gate with machine rolled lathe made of 18 SWG bright CRCA strips in one piece without welded joint rolling centre not more then 76mm interlocked with necessary locking arrangements, suitable gauge wheel, bearing pully, with suitable gear box, bottom plate of 10 SWG with two sides of 10 SWG guiding channels, 3\" dia steel pipe of 8 mm thick with 12 mm MS side plates, 20 SWG top cover with necessary cross bracings of stiffener with heavy type MS clips, suitable locks, channels, bracket plate, roller shaft, ball bearings, hook, electrical operation system completely, manually operating hand lever and other necessary fixtures for smooth and safe operation including cost of all materials, priming coat of approved quality including cost of all materials, transporting, strutting, scaffolding, labour charges, all leads, lift etc., complete and placing in position as per the specification and directed by the engineer at site. |
| 29 | Providing and fixing manually operated ROLLING SHUTTERS machine rolled lathe made of 18 SWG bright CRCA strips in one piece without welded joint rolling centre not more then 76mm interlocked with necessary locking arrangements, suitable gauge wheel, bearing pully, with suitable gear box, bottom plate of 10 SWG with two sides of 10 SWG guiding channels, 3\" dia steel pipe of 8 mm thick with 12 mm MS side plates, 20 SWG top cover with necessary cross bracings of stiffener with heavy type MS clips, suitable locks, channels, bracket plate, roller shaft, ball bearings, hook, manually operating hand lever and other necessary fixtures for smooth and safe operation including cost of all materials, priming coat of approved quality including cost of all materials, transporting, strutting, scaffolding, labour charges, all leads, lift etc., complete and placing in position as per the specification and directed by the engineer at site. |
| 30 | Fabrication, Supply & fixing of anodized Aluminium section approved make of lintal for single leaf DOOR fully glazed using Al. section of 101.60 X 44.45 X 1.60mm for Door frame, shutter top, middle and bottom frame and 6mm thick plain lass for door panel including cost of all materials, rubber beading, lock, Alu. Handles, tower bolts, door stopper, automatic door closer and floor spring etc., with all leads and lifts complete. |
| 31 | Fabrication, supply & fixing of fully glazed Aluminium Anodized natural colour matt finish WINDOW using Alu. Sections of approved make of lintal of 61.85 x 45.50x 1.60mm for outer frame bottom Gutter section, 61.85 x 31.75 x1.60mm for sides and Top section, shutters with 40 x 20 x 1.25mm for top, bottom, sides and 40x26.70x1.25 for middle vertical and wired glass panes of 4mm thick including cost of all materials, rubber beading Alu, Clips, wind arrester, sliding lock, labour charges with all leads and lifts etc., complete. |
| 32 | Fabrication supply and fixing in SAZED FIXED position of Aluminium natural colour matt finish for FULLY PARTITION using Alu. Sections of approved make of lintal of 101.60X 44.45 X 1.60mm for outer frame, both verticals and Horizontal, Plain glass panes Or 6mm nick including cost of all materials. rubber beading Alu. Clips, labour charges with all leads & lifts etc., complete. |
| 33 | Supplying fabricating, erection and fixing in position of MS STAIR CASE, MS Ladder, MS Walk way platform, Cable Trench cover plate, MS insert plates, Hand rails, etc., with suitable sizes of MS structural members, MS plate / Chequered plates, MS pipe, etc., of suitable thickness for the approach weir and switch yard steps including cost of all materials, transporting, labour charges, welding charges, cutting charges, one coat of primer of approved quality, all leads, lifts, etc., complete as directed by the engineer at site. |
| 34 | Painting with two coats of EPOXY Zinc Aluminium paint over one coat Red oxide Zinc Phosphate paint for new steel ladder and Hand rail approach to gallery completely as per instruction of Engineer at site including cost of Material,labour charges, lead, lift etc. complete. |
| 35 | Supplying and fixing of 1/2\"\" PVC tap of reputed make for toilet room building including cost of all materials, lead, lift, labour charges etc complete. |
| 36 | Supplying and laying of PVC pipe various size with standing of 10 Kg/cm2 for water line including cost of all Material, labour , leads, lifts etc. complete. |
| 37 | PVC pipe 25 mm dia. |
| 38 | PVC pipe 20 mm dia. |
| 39 | PVC pipe of size 110mm with 6 kg /cm2 pressure |
| 40 | White washing with two coats of white cement of approved quality for inner side of Power house(Sub structure) including cost of all Material, leads, lifts, etc. complete. |
| 41 | Colour washing two coats with interior Emulsion paint over one coat of plastic Emulsion primer for inner side of Power house (Super structure) after applying two coats of wall putty using standard quality of putty paste including cost of all materials labour lead lift etc., complete. |
| 42 | Colour washing using Asian apex damp proof or equivalent exterior emulsion two coats over one coat of Primer to the outer side of Power House including cost of all Material, labour, lead, lift, T & P etc. complete. |
| 43 | Supplying and fixing of PVC Gate valve of various size of reputed make, including cost of all materials, labour charges, lead, lift, Transporting charges, etc., complete. |
| 44 | Supplying and fixing of 25mm Dia GM valve |
| 45 | Supplying and fixing of 20mm Dia GM valve |
| 46 | Wiring with 2 x 1.50 sqmm (22/0.3) PVC insulated cu unsheathed cu. conduit of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113 mm TW switch box for 5 A pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point including cost of all Material, labour, lead lift etc., complete. |
| 47 | Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box (SD-133) including cost of all Material, labour, lead lift etc., complete. |
| 48 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I bearer wire for service connection mains including cost of all Material, labour, lead lift etc., complete. |
| 49 | Supplying and fixing of 4’ 40w flu. Fitting complete with electronic choke with teak wood round blocks on wall or ceiling with flu. Tube with PVC unsheathed copper leads from terminals to the fitting with tube including cost of all Material, labour, lead lift etc., complete. |
| 50 | Supplying and fixing of exhaust fan 375mm heavy duty with regulator with the existing clamps of approved quality of Higher End Havells Crompton/ Usha/Bajaj including cost of all materials lead lift etc. complete.(SD-111). |
| 51 | Supply and fixing of 23 CM SL Bracket with fancy glass shade with 15W CFL bulb including cost of all Material, labour, lead lift etc., complete. |
| 52 | Supplying and fixing of single phase main board with TW board of size 600mmx300 mm , 2 Nos. of 63 Amps Porcelain Fuse Unit (500 V) ,1 No 32 Amps DP Switch with Metal Clad (Side Handle),2 Nos. 32 Amps Porcelain Fuse Unit (500 V),1 No 32 A neutral link, Earth link (1\" x 1/8\") copper flat , 4 Nos. Tower Bolts of 150 mm long and 12 mm dia. with PWD earthing including cost of all Material, labour , lead lift etc., complete. |
| 53 | Supply, erection, testing and commissioning of new 48 watts, 230 V, LED street light outdoor fitting of Phillips / Havells or equivalent make with ISI standard, supporting pipe , clamp for fixing the fitting with outdoor terminal box of size 250x200x150 mm made of 16 SWG CRCA sheet with powder coated siemens gray painting with terminal blocks of adequate capacity and adequate gland holes at bottom , connecting the street light fitting to the terminal box with 3c x 2.5 sqmm flexible copper cable , for connecting the light fittings with the existing pole for dam area lighting to the satisfaction of Engineer at site including the cost of materials, labour, lead, lift etc complete. |
| 54 | Supply, laying, testing and commissioning of new 4 core x 2.5 sq.mm, 1100 V, PVC insulated, armoured, multi stranded, LTUG copper cable of reputed make with ISI standard with 8 SWG GI earth wire including cost of cable, 32 mm dia UPVC pipe finolex make or equivalent , UPVC bend and chipping the concrete for adequate depth and width and filling the portion with concrete after laying the cable in concealed / open wiring at dam top to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete. |
| 55 | Filling the large pit with excavated earth including labour charges, hire charges for machineries, all materials, lead, lift and compaction by power roller watering, sectioning, the side slopes including cost of materials, labour, lead lift etc complete. |
| 56 | Flush pointing with cm 1:3 on the pitching stone joints including cost of all materials,labour charges, lead, lift, curing, etc., complete. |
| 57 | Construction joint treatment in downstream side of weir portion complete as per the direction of the Engineer and complying with standard specifications, cost of all materials, labour chargres, lead, lift, transport, etc., complete. |
| 58 | PU injection treatment for concrete weir portion complete as per the direction of the Engineer and complying with standard specifications, cost of all materials,labour charges, lead, lift, transport, etc., complete. |
| 59 | Providing RCC Readymade Circular Rings 4 ft. Inner Dia., including Insertion in to the Pit, Aligning, Packing and Finishing Neatly as per Specification, including Cost of all Material, Labour, Lead, Lift, Curing etc. Complete. |
| 60 | Providing, fixing and finishing false ceiling using plain gypsum boards of approved equivalent, fixed to the suspended grid, fabricated and fixed to the soffit of roof / beams and wall using - Gypsteel |Ultra ceiling sections perimeter channels of size 20 mm x 28 mm x 30 mm fixed to the wall using metal screws and nylon sleeves recommended by the manufacturer at a spacing not exceeding 600 mm c/c, intermediate channels of size 15 mm x 45 mm x 15 mm at a spacing not exceeding 1200 mm c/c Suspended using ceiling angles of size 25mm x 10 mm and appropriate length, fixed to the soffit of R.C.C beams/ slabs using G.I soffit cleats of size 27 mm x 37mm x 25 mix 1.6 mm and metal expansion fasteners of 38 mm x 12 mm diameter at a spacing not exceeding 1200 mm c/c, ceiling sections of size 80 mm 26 mm x 51 mm provided across the intermediate channel at a spacing of 475 mm cc, at bottom which shall be fixed by G.I connecting clips of 2.64 mm diameter at junctions.(The ceiling boards shall be fixed to the underside of the suspended grid using 3.5 mm x |25 mm self-tapping screws. The joints shall be finished with joint paper tape and jointing compound of approved make and providing and applying plaster of Paris putty for required thickness. The surface of the false ceiling fixed as above shall be prepared by sand papering, providing, applying and finishing a coat of approved make white cement putty, one coat of approved make cement primer and two or more coats of approved make and shade premium plastic emulsion, etc. The cost includes, Cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying toll standard specification. |
| 61 | Consultancy charges for Design and drawings, for the proposed core wall in the earthen bund from the Approved / Reputed organization. The cost includes 10 Nos hard copy and 1 No. soft copy drawings and supporting data for all the items of works shall be furnished to the Engineer-in - charge designated for this work. |
| 62 | GST for bidders within TamilNaduNote : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as \"Zero\" for IGST. |
| 63 | GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as \"Zero\" for SGST and CGST |
| 64 | IGST Please Enable Macros to View BoQ information |
