Tender For De-Silting Of Chilla Village Nalla From Chilla Village To Chilla Regulator Sh-(1) 1St 60% Of Desilting Of Drain In 1St Phase From 16.01.2026 To 15.06.2026 Sh: (2) 40% Of Desilting Of Drain In 2Nd Phase From 16.06.2026 To 15.01.2027 In Ward No. , Delhi-Delhi
TDR : 53951436
Tender Notice
BOQ
1 Days Left
Delhi
Delhi
Tender For De-Silting Of Chilla Village Nalla From Chilla Village To Chilla Regulator Sh-(1) 1St 60% Of Desilting Of Drain In 1St Phase From 16.01.2026 To 15.06.2026 Sh: (2) 40% Of Desilting Of Drain In 2Nd Phase From 16.06.2026 To 15.01.2027 In Ward No.
Name of Work:- De-silting of Chilla Village Nalla from Chilla Village to Chilla Regulator SH-(1) 1st 60% of Desilting of drain in 1st phase from 16.01.2026 to 15.06.2026 SH: (2) 40% of Desilting of drain in 2nd Phase from 16.06.2026 to 15.01.2027 in Ward No. 190, (New Ashok Nagar) Shahdara (South) Zone.
Sl. No.
Item Description
1
De-Silting work
2
Approved Item No. 15 Hiring of Back hoe loader wheel mounted of having a loading bucket of 1 cum capacity and excavating capacity of 0.24 cum including driver, fuel, lubricant etc. for 8 hrs working in a day and including all assemblies required for demolition/excavation.Back hoe loader.
3
0.25 Excavation in Nalla/ drains in running condition including taking out and disposal of excavated silt/ sludge /rubbis / earth mixed malba etc. from the drain culvert and other similar conditions under sumberged / foul condition within 50 metre lead and 1.5m lift, blocking drain in the required length by placing sand filled bags and pumping out water including removal of stone, brick bats floating material etc. before excavation. (Covered Nalla)
4
1.1.3 Disposal of materials by mechanical transport including loading ,unloading and stacking.upto 1 Km
5
1.1.3 Disposal of materials by mechanical transport including loading ,unloading and stacking.upto 43 Km
6
16.93 Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
