|
| 1 | Surface dressing n exc 15 cm deep in Soft/loose soil for hard standing Stage all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in Soft and Loose Soil for foundation, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 3 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified & directed. |
| 4 | Removing surplus soil to a distance n exc 50m and making good surface at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L for hardcore of broken boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for design mix M-30 Reinforced cement concrete for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete including raft footing and base of the column using 20 mm graded stone aggregate complete all as specified and directed. |
| 7 | M&L for design mix M-30 Reinforced cement concrete for column, pillars, piers, post and struts using 20 mm graded stone aggregate complete all as specified and directed. |
| 8 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on Flat rough finished surfaces of concrete. |
| 9 | M&L for formwork for flat fair surfaces of finished concreteto sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions on square, rectangular or polygonal rough finished surfaces of concrete |
| 11 | M&L for mild steel TMT (CRS/HCRM/CRM) round bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking and binding with and including mild steel wire(annealed) not less than 0.9 mm dia complete |
| 12 | All as per item No.11.00 but 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders |
| 13 | Demolition of concrete block walling, brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc all as specified and directed. |
| 14 | M&L for providing precast cement concrete solid building blocks masonry exc 10cm width, type C1,1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick plaster in CM 1:4 in two coats (10mm thick backing coat+5mm thick finishing coat) on concrete surfaces of wallsfinished even and smoothwithout using extra cementcomplete all as specified and directed. |
| 16 | M&L for rendering 10mm thick plaster in CM 1:6surfaces of wallsfinished even and smoothwithout using extra cementcomplete all as specified and directed. |
| 17 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 18 | M&L for providing cement concrete, 75 mm thick, type D-2, 1:4:8 using 40mm graded stone aggregate as in sub base or sub floor etc. complete all as specified and directed. |
| 19 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 20 | Material and labour for applying 3 mm thick wall care putty on old plastered surfaces of WALL including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applyingtwo coat ofdistemperetc complete all as specified and directed. |
| 21 | M&L for steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed. |
| 24 | S&F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. |
| 25 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed. |
| 26 | S&F 110mm dia PVC (SWR) bends all as specified and directed. |
| 27 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminium angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminium main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed |
| 29 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed |
| 30 | M&L for 10mm thk PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification etc complete all as specified and directed |
| 31 | M&L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etclaid over and including 15mm thick screed bed in CM 1:4and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | M&L for Glazed ceramic Coloured tiles in vertical surface such as skirting, dado and rises to steps etc. 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in CM 1:3 set andset and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed. |
| 33 | M&L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polis |
| 34 | M&L for 10mm thick cement plaster 1:3 screed bed or bedding for dado / skirting complete. |
| 35 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 36 | M&L for 600x450 mm bevelled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building boardfixed to wall by wooden plug with chromium plated brass screw and cup washer fixed complete all as specified and directed. |
| 37 | S&F Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed. |
| 38 | S&F fancy type pillartaps castcopper alloywithcapstan heads chromiumplatedscreweddownhigh pressure withletteredhotorcoldwithlongscrewedshanksandfly nutsscrewedforiron pipeand15 mmboreof pipe Make: Hindware Cat. No.: F570023 Sink Cock With Normal Swivel Spout-Wall Mounted or equivalent |
| 39 | S&F 32mm dia PVC waste pipe for WHB and urinals fixedcomplete all as specified and directed. |
| 40 | S&F 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all asspecified and directed. |
| 41 | S&F vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outletetc complete all as specified and directed. |
| 42 | S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule andfixed complete all as specified. |
| 43 | S&F bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm borecomplete all as specified and directed. |
| 44 | S&F 75mm dia PVC (SWR)floor trap with grating including jointing with solvent cement complete all as specified and directed . |
| 45 | M&L for PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall75 mm bore etc complete all as specified and directed. |
| 46 | M&L for PVC Rain water pipe single socketed in any length with rubber ring joints fixed to wall 110 mm bore etc complete all as specified and directed. |
| 47 | S&F 110mm dia PVC bend all as specified and directed |
| 48 | S&F vitreous china wash down water closet (pedestal pattern) white,including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. Note: Quoted rate shall excludes the cost of flush pipe, cistern & seat cover and the same shall be paid separately under respective item. |
| 49 | S&F seat cover for pedestal pan with plastic water closet seat , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 50 | S&F 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 51 | S&F providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 52 | S&F brass Chromium Plated Health faucet with spring pipe 600mm long and required nipple all as specified and directed. |
| 53 | S&F two way bib cock with two lever and wall flange chromium plated brass of approved make, screwed for iron pipe 15mm bore complete all as specified and directed |
| 54 | S&F Rotational moulded PVC, double layered, water storage tanks of capacity 2000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified. |
| 55 | S&F 25 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes includingnecessary GI fittings complete all as specified. |
| 56 | S&F 25 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed, complete all as specified and as directed. |
| 57 | S&F 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2fixed to walls, ceiling or in floors etc complete all as specified and directed. |
| 58 | S&F stop valves/angle valve, cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed |
| 59 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed. |
| 60 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 61 | S&F 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed. |
| 62 | S&F 100 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed. |
| 63 | S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 64 | S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 65 | Demolition and breaking up drain pipes 100 mm dia (Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and directed. |
| 66 | Description all as per item No. 18.00 above but 150 mm dia complete all as specified and directed. |
| 67 | M&L for Salt Glazed Stoneware pipes grade \"A\", 100mm bore, laid in trenches and jointed all as specified and directed. |
| 68 | M&L for Reinforced concrete pipes, 200mm, class NP-2, laid and jointed complete with collars laid in trenches and jointed all as specified and directed. |
| 69 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 70 | All as per item No. 69.00 herein before but bed to 200 mm bore. |
| 71 | S&F cast iron soil, waste and vent spun pipes 100 mm dia, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 72 | S&F Cast iron work grade FG 150, articles exc 5 kg eachunmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stopvalve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed. |
| 73 | M&L for flat iron for surrounding of cover slab for manholes etc and similar work conforming to Fe 290gde E 165 complete all as specified and directed. |
| 74 | S&F towel rail 600 mm long brass Chromium plated20mm dia all as specified and directed. |
| 75 | S&F Brackets suitable for item no 74 |
| 76 | S&F brass Chromium plated towel ring round all as specified and directed. |
| 77 | M&L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 Volts drawn in to and including concealed PVC conduit of suitable dia including sunken to wall including its accessoriessuch as tee, bend ,elbow, socket and chiselling on wall complete and al so making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including modular box including cover plate & suitable sizefor housing switch ,socket, regulators etc complete for the following:- |
| 78 | (a) One light point controlled by one switch |
| 79 | (b) One Fan point controlled by one switch |
| 80 | (c) One 5 pin 6 Amps socket outlet on independent board. |
| 81 | (d) One 5 pin 6 Amps socket outlet on same board. |
| 82 | All as per item No.77 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor FRLS 1100 v grade but sheeted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts gradefor16 Amps power point on independent board and 1.5 sqmm cable as earth wire. |
| 83 | Supply and fix switch piano 5 Amps one way flush type, matching with existing make, ISI marked,all as specified and directed. |
| 84 | S&F in socket outlet 2 in 1, 5 pin, 5 Ampsflush type, complete all as specified and directed. |
| 85 | S&F switch socket combination 3 pin, 16 Amp, flush type universalcomplete all as specified and directed. |
| 86 | Supply and fix for Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 87 | S&F surface and wall mounted LED Batten with Aluminium housing and integratedelectronic driver energy efficient 10W LED (Two feet)140-260 V AC, System Lumen Out put min 1000-1200 Lumen in 10 w with 5700-6500 K CCT with PF >0.95 CRI >=70 and with <=10 % THD, with Min 2.5 KV Surge protection in Built and LED decorative complete all as specified and directed.Make: Havells or equivalent / Bajaj/ Philips LUMILINEPLUSNEOBS10WLED865SPCSSINDS. |
| 88 | S&F Square 600 mm X 600 mm, 36 watt to 42 watt Recess mounted LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 -42 w,140V -260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark Registration no complete all as specified and directed |
| 89 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300 mm sweep with, blades, and frame and louverscomplete all as specified and directed |
| 90 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection |
| 91 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core |
| 92 | Supply & fixing of sheet metal enclosure MCB DB SPN 04 ways double door type with bus bar all asspecified and directed . |
| 93 | Supply and fixing MCB SPN 32 Amps current rating 240V, 10KA \"C\" curve complete with connection testing and commissioning. |
| 94 | Supply and fixing MCB SP 6 to 32 Amps 240V, 10KA \"C\" curvecomplete with connection testing and commissioning. |
| 95 | M&L for sub main wiring but using two single core multistrandedPVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC conduit of size 25 mm dia including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continuous earthing complete all as specified anddirected.Note:(i) Each sub main wiring shall run in separate PVC conduit.(ii) PVC conduit/ PVC casing capping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/beam column/ceiling etc). The same shall be deemed to include in the quoted rate. No extra cost shall be paid for the PVC conduit/ PVC casing capping item. |
