|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for all as specified and directed. |
| 2 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-w(Gde-E-250), including necesssary required welding, bolting, drilling etc complete all as specified and as directed. |
| 3 | S&F MS work as in wind ties for roof including drilling & securing bolts complete all as specified and as directed. |
| 4 | S&F Plates of Fe 410 Gde-E250(plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 5 | Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed. |
| 6 | Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises. |
| 7 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete. |
| 8 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thickset and jointed in neat cement slurry and pointed in coloured cement to match with backcoat including rendering 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. |
| 9 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 10 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 11 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete. |
| 12 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 13 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 x Tower Bolt 150 mm, anodised aluminium snap beading, screws etc. complete all as specified |
| 14 | Supply & fixingpowder coated aluminium windows and ventilator shutters,slidingor fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified.(Note:- Glass pane and mesh will be measured and paid separately ) |
| 15 | Supply and fixingpowder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed. |
| 16 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and around allbeading complete all as specified and as directed |
| 17 | S&F Sheet glass 4.8mm thick tinted glass and glazing in squarescompleteall as specified and directed. |
| 18 | Supply & fixingaluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixingcomplete all as specified and directed. |
| 19 | S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed |
| 20 | S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete. |
| 21 | S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) soliddoor/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant |
| 23 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thickcomprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 24 | S&F Stainless steel, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections and fixed 250 mm long complete all as specified and directed |
| 25 | S & F 200 mm long Stainless steel barrel tower bolts of extruded section complete all as specified and as directed. |
| 26 | S & F Stainless steel handle, cast type 150mm size complete all as specified and as directed. |
| 27 | S&F Butt hinges medium weight Stainless steel of 100mm long complete all as specified and directed. |
| 28 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 29 | M&L for two coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete |
| 30 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 31 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet0.50mmthick of any colour having tensile strength of 550 MPAas in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 32 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet0.50mmthick of any colour having tensile strength of 550 MPAas in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 33 | Material and labourfor providing silicon based treatment in the roof sheet to make the holes leakproof by providing silicon based adhesive includingall necessary labour and material to entire satisfaction of Engr-in-Charge.Contractor shall be fully responsible to make the holes leak proof andhas to give a written guaranty fortwo year |
| 34 | M&L for Leak Seal Self Adhesive Water proof Sealing tape 100 mm size for water leakage fixed complete all as specified.(Note.All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to bethis aspect and nothing extra shall be admissible on this account.) |
| 35 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 36 | M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement. |
| 37 | M&L for 25mm thick PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed. |
| 38 | M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 39 | Demolition of brick work built in cement mortar all as specified |
| 40 | M&L Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 41 | M&L for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 42 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. all as specified and directed. |
| 43 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever requiredas per manufacturerer\"s instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and faircomplete all as specified NOTE -WPC shall be measured and paid separetely. |
| 44 | Supply only WPC complete all as specified and directed. |
| 45 | M&L Preparing newly plasteredsurfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed |
| 46 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. |
| 47 | Dismantling wall and ceiling boards, any thickness incl cover fillets complete all as specified and directed. |
| 48 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm complete all as specified and directed. |
| 49 | Supply & fixing 4mm thick non asbestos E-board cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 50 | S&F thermocol sheet 30mm thick as in false ceiling to reduce to heat in Ist floor roof ceiling complete all as specified and as directed. |
| 51 | S&F Decorative Stainless steeltubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. |
| 52 | S&F in repair 50mm thick prefabricated puf panel factory made, the panels comprise of PUF bonded between two sheet of precoated GI sheets of 0.5 mm thick complete all as specified and as directed. |
| 53 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 54 | Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. |
| 55 | All as per Item No. 54 here–in–before, but for 25mm dia (Bore). |
| 56 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 57 | All as per Item No 56 above here–in–before, but for 25mm dia (Bore). |
| 58 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 59 | M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including necessary form work complete all as specified and directed. (reinforcement to be measured separately) |
| 60 | M & L for mild steel TMT bars ,10mmdia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90mm dia all a specified and directed |
| 61 | M & L RCC ( 1:2:4)type B-1 using 20mm graded stone aggregate in slabs supported on walls, beams & columns complete all as spd(reinforcement to be measured separately). |
| 62 | M/L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete. |
| 63 | M&L for 20mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6complete all as specified and directed by Engineer in charge. |
| 64 | Supply & fixing in repair110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 65 | S&F repair 15mm dia fancy type bib taps CP Brass with Capstanhead, screweddown, screwed for iron pipe of bore 15mm complete. |
| 66 | S&F brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete . |
| 67 | S&F Brass CP Wall mixer for mixing hot & cold water (3 in 1)screwed down for iron pipe and fixed bore of pipe 15mmcomplete all as specified |
| 68 | S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. |
| 69 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 70 | S&F in repair Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer)as approved by the GE. |
| 71 | S&F in repair Brass chromium platedshower rose 125mm size with shower arm, including fixing to steel pipe or unioncomplete all as specified and directed. |
| 72 | Supply& Fixing in repair tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 73 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by Engr-in-Charge |
| 74 | S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mmas approved by Engr-in-Charge |
| 75 | S&F Peg Set of 6 Stainless Steel as approved by Engr-in-Charge |
| 76 | S&F Soap Dish Stainless Steel complete all as specified & directed. |
| 77 | S & F in repair Stainless Steel grating 100mm dia complete all as specified. |
| 78 | S&Fvitreous China squatting pan, Orissa pattern incl CI trap Fix inrepair, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed. |
| 79 | S&F Vitreous China wash downwater closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging deviceetc.) complete all as specified and directed by Engineer-in-Charge |
| 80 | S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 81 | S & F CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead jointall as specified and as directed. complete fixed in repair incl making joint water tight. |
| 82 | S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets,PVC waste pipe 32mm dia,wastecoupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed. |
| 83 | S&F Vitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed. |
| 84 | S&F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with 4 nos CP brass screwed cup washers complete all as specified and directed. |
| 85 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed. |
| 86 | Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed. |
| 87 | Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm compleate allas specified and directed. |
| 88 | Dismantling water tanks of capacity exc 500 butn.exc 1000ltrs complete. |
| 89 | S&Frotational moulded polythene water storage tanks tripple layer(cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gramcomplete all as specified and directed. |
| 90 | M &L For PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. |
| 91 | M&L for Linoleum sheet 3.2/3.3 mm thick, plain coloured, laid dry in floors including stretching, cutting andfitting |
| 92 | M&L for welding of existing mild steel member with suitable size all as specified and directed by engineer-in-charge |
| 93 | M&L for 0.8mm thick trapezoidal metal decking sheet (Galvanised sheet with zinc coating for corrosion resistance), with a 10 mm @ 150 mm c/c reinforcement mesh and M25 concrete top layer of 100 mm thick from base of decking sheet. The sheet shall be screwed to main members with 12x24 self drilling screws at 325 mm c/c. The weight of decking sheet shall be 65Kg/Sqm (approx), and live load to be considered at 200kg/Sqm. Note - The Quoted rate should be inclusive of all items mentioned in description. |
| 94 | S&F for 2.5mm thick multistile with flexible core flooring of size( 6\"\"X36\" ) any colour with wear layer thickness of 0.3 mm of abrasion rating for scratch (AC 6)includinng all accessories and recommended adhesive SR 505 or SR 998 complete all as specified and directed. |
| 95 | Dismantling ofinterlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors ,apron etc complete all as specified and directed. |
| 96 | M&L for PCC (1:4:8 ) type D-2 as in sub base finished even and rough 75mm thick. |
| 97 | S&F machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-30 gradecomplete all as specified and as directed. |
| 98 | M & L for sand filling under floors or in foundation including watering and consolidation, |
| 99 | Taking down carefullyaluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights, bells etc and making good disturbed surfaces of wall, roof etc to match with existing surface. |
| 100 | Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including PVC casing/capping and accessories including PVC/Polycarbonate for non modularor surface mounted modular box for modularrectangular box for mounting, switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth, etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge) |
| 101 | All as per item No.100 herein before but one light point controlled by one two way switch |
| 102 | All as per item No.100 herein before but one socket outlet 5 Amps on the same board. |
| 103 | All as per item No.100 herein before but one socket outlet 5 Amps on independent board |
| 104 | All as per item No 100 herein beforebut wiringwith 2.5sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire forsocket outlet 5 pin 15 amps on independent board. |
| 105 | Supply & Fixing lamp holder (dome type) PVC insulated body with cord grip cap for angle/battern fitting complete all as specified and directed. |
| 106 | Suppy & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed. |
| 107 | Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed. |
| 108 | Suppy & Fixing switch piano flush type single pole, two way 6 Amp complete all as specified and directed. |
| 109 | Supply & Fixing socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed. |
| 110 | Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed. |
| 111 | Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc. |
| 112 | Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed. |
| 113 | Supply and fixing of following rating of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for250V, AC, 50Hz.Electrical supplyand as directed by Engr-in-Charge. |
| 114 | (a) 6 Amp one way switch, 1 module |
| 115 | (b) 6 Amp two way switch, 1 module |
| 116 | (c) 6 Amp 2/3 Pin combined socket shuttered, 2 module |
| 117 | (d) Modular Switch 1 way 16 Amp, 1 Module |
| 118 | (e) Modular socket 6A/16Amp, 2/3 pin combined, 2 Module |
| 119 | (g) Steped type electronic fan regulator modular, 120W-2 module |
| 120 | Supply and fixing of following sizes of modular front plates, white with frame on existing boxes complete as required. |
| 121 | (a) 2 Module |
| 122 | (b) 3 Module |
| 123 | (c) 4 Module |
| 124 | (d) 6 Module |
| 125 | (e) 8 Module |
| 126 | Supply and fixing anodised rust proof 18 SWG MS box, flush type offollowing sizes (to be of same make as modular switches and sockets)to berecessed in wall/gypsum partition complete as required :- |
| 127 | (a) (1-2 Module) |
| 128 | (b)(3 Module) |
| 129 | (c)(4 Module) |
| 130 | (d)(6-8 Module) |
| 131 | Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in PVC casping caping ( ISI marked) Heavy grade inclusive ofjunction/terminal boxes, all fittings and accessories fixed and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DBincluding cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existingold sub main wiring complete all as specified.Note :1 The cost of earth wire is included in the quoated rates. 2.Two run of 6 sqmm , one run 6 sqmm incl one run of PVC conduit will be measured as one unit ie one running metre” |
| 132 | S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 133 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper cable of suitable size complete |
| 134 | Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 50,000 hours completeall as specified and directed.. |
| 135 | Supply and Fixingpropeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete includingthe ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed. |
| 136 | Supply & Fixingsheet metal enclosure for DBs(double door type)single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed. |
| 137 | All as per item No. 136 herein before but 12 way |
| 138 | Supply & Fixing 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed . |
| 139 | Supply & Fixing 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed . |
| 140 | Supply and fix water heater storage type electric supplied and installed complete steel body with copper inner tank and heating element upto 2 KW of capacity 25 ltrs, BEE 5 Star rated including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge. |
| 141 | M&L for Earthingcomplete with galvanized sheet earthplate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for wateringand connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge. |
| 142 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories (incl ceiling clamp/hook fixing in ceiling/roof with fashner/nut & bolts), 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed by Engineer-in-Charge. |
| 143 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 2 core laid in trenches or passing through pipes/ducts in service connection and incl the disturbence surface of road making good with using PCC complete all as specified and directed. Including taking down old LT U/G Cable from trenches/protection pipe etc complete. |
| 144 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :-Thickness of sand cushioning shall be measured after punning. |
| 145 | M&L for brick sub class \"B\" for protection of cable comlete all as specified and directed. |
| 146 | Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed. |
