|
| 1 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 2 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered,concrete surface to give an even shade. |
| 3 | Scraping brushing to remove paint to base metal surface. |
| 4 | Repairs to plaster in patches of Area 2.5sqm and under including cutting the patchin proper shape and preparing and plastering the surface of the wallscomplete including disposal of rubbish to the dumping ground within 50 Metres lead(a)With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm |
| 5 | Providing and laying vitrified floor tiles indifferent sizes in light colour shades made using Soluble Salt Technology (thickness to bespecified by the manufacturer) with waterabsorption’s less than 0.08% and conforming toIS : 15622 of approved make in all colours andshades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble saltPrint Penetration should be up to 1 to 2 mm afterthe tiles are fired & polished )(a)Size 600x600 mm |
| 6 | Providing & laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: (a)Applying a slurry cost of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS.2645 and approved by Engineer- in- charge over the RCCslab including adjoining walls upto 300mm heightincluding cleaning the surface before treatment. |
| 7 | Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade. |
| 8 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats). |
| 9 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(b) Windows of area 3 sqm and below. |
| 10 | Hollock wood doors shutter, windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.a) panelled, glazed or glazed and panelled.i)40 mm thick |
| 11 | (ii)(Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm)(B)single Rebate (60mm x 100mm) |
| 12 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 13 | (a) Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together throughtheir entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement forinside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to bemade for the exact size of opening where rolling shutter is to be fixed). Please Enable Macros to View BoQ information |
